SM-8160 Ultrasonic Stencil Cleaner ,High pressure Spraying Stencil washing system
Features :
Patent design, close contacting ultrasonic combining with spray cleaning, the stencil is no need to dip into the tank
The stencil move...
|
Cleaning Equipment |
Introduction
The equipment is suitable for all kinds of the outer surface of the workpiece cleaning, such as wave soldering jig, reflow soldering tray, condenser cleaning, printing scraper, machine parts surface flux, clean oil, dust etc. Integrated use of artifacts in ...
|
Cleaning Equipment |
Features
1.Comprehensive cleaning: For PCBA product residues on the surface cleaning
2 .Automatic cleaning mode: in a clean room complete cleaning, rinsing and drying process, small volume, compact structure
<...
|
Cleaning Equipment |
Features :
1.Dedicated to water-based cleaning fluid to clean stencils, PCBA, etc. Process with high pressure spray system.
2.Double liquid tank, equipped with heating system, implementation needs cleaning and rinsing.
<...
|
Cleaning Equipment |
FULLY PNEUMATIC STENCIL CLEANING MACHINE , SMT STENCIL WASHING SYSTEM
Features:
1.Use compressed air as energy , no electricity , no ptential safety hazard.
2.Humanized design ,one-touch operation ,easily finish cleaning and drying work ...
|
Cleaning Equipment |
Feature:
1.Sturdy and stable Design.
2.In house design control board.
3.User friendly ‘soft touch’ LED membrane control panel.
4.Pressure regulated on pusher’s to prevent board damage.
5.Three points p...
|
Board Handling - Conveyors |
Feature:
1. User friendly ‘soft touch’ LED membrane control panel.
2. Operating mode:OK pass through or Stock,Ng reject,Awaiting definite, By Pass.
3. Durable rollers as conveying medium. ( no replacement of belts needed)
...
|
Board Handling - Storage |
This conveyor is used to unload PCB’s or pallets from a wave soldering machine at 6-7° angle. Decline section presents PCB/pallet at standard height to downstream machine.
Features:
Conveyor width adjustment using hand c...
|
Board Handling - Conveyors |
Feature:
1. PLC Program control.
2. Easy way of belt replacement.
3. Heavy bottom design to prevent shifting.
4. PCB Precise stopping in position.
5. &...
|
Board Handling - Conveyors |
Feature:
1. PLC Program control.
2. Easy way of belt replacement.
3. Heavy bottom design to prevent shifting.
4. PCB Precise stopping in pos...
|
Board Handling - Conveyors |
Feature:
1.Sturdy and stable Design.
2.In house design control board.
3.User friendly ‘soft touch’ LED membrane control panel.
4.Pressure regulated on pusher’s to prevent board damage.
5.Three points p...
|
Board Handling - Storage |
PCB Magazine Un-Loader
Feature:
1.Sturdy and stable Design.
2.In house design control board.
3.User friendly ‘soft touch’ LED membrane control panel.
4.Pressure regula...
|
Board Handling - Conveyors |
Features :
1.Full automactic counting SMD components ,high accuracy count.
2.Easy operate,designed to prevent tape dropping,minimizing risk of damage to tapes.
3.Count forward and reverse ,double-check feature ensures accuracy,built-in memory allows ...
|
Component Counters / SMD Counters |
Motorized electron-optical SMD components counter, works by detecting cut-out holes on SMD reel tapes, accurate and fast.
1,The automatic counter sets up and changes over fast,count out an entire reel or a specific number of parts to prepare for you next job,and you...
|
Component Counters / SMD Counters |
Introduction:
Pneumatically driven and electric control
The machine is pneumatically driven and electric control. The straight knife type separator machines were designed to separate pre-scored panel boards carefully, without bending or tension stress. Even
|
Assembly Services |
Features:
PCB Separator,SM-2008A separates both small and large PCBs fast and economicaly. To optimize operation,the separation length can be programmed.
Safe operation
The PCB is placed with its pre-scored groove onto the linear blade,whe...
|
Assembly Services |
Features:
PCB Separator,SM-2008C separates large PCBs fast and economicaly. To optimize operation,the separation length can be programmed.
Safe operation
The PCB is placed with its pre-scored groove onto the linear blade,when th...
|
Assembly Services |
Features:
SM-2007 separates both small and large pre-scored PCBs.
The table and the rest can be continuously adjusted to the most suitable working position, The slit between the linear blade and the rest can be adjusted to ensure that the side strips fall thro...
|
Assembly Services |
SM2000A is the reasonable model to start with, suitable for smaller numbers of PCBs.
The PCB is fed manually between the circular blades and is thereby separated.
SM2000AM separates large numbers of PCBs without fatigue of the operator.
the lower circular ...
|
Assembly Services |