1.PCB size range: 50 * 50-330 * 250mm
2.Use motor to drive the synchronous wheel with the cylinder cushion to do 180 °flip, when flipping can clamp the PCB.
3.PLC program control:manual track width adju...
|
Board Handling - Conveyors |
Model
MS-811
MS-811-L
MS-811-XL
Dimension(L*W*H)
2000*800*1600mm
2800*1010*1600mm
2800*1080*1600mm
Rack Size
...
|
Pick & Place |
Loader machine is used for PCB loading and unloading in SMT and Al production line.
Dimension (L*W*H):1430*800*1600mm, rack size:355*320*563mm, PCB size:350*50~250mm
MS-810-L
Dimension(L*W*H):2000*1010*1600mm, rack size:535*460*570mm, PCB size:530*50~390mm
...
|
Pick & Place |
applicable PCB: L510*W460mm-L50*W50mm
Mounting capability: 46,000CPH
Applicable components: 03015-W55*L100mm, H:15mm or less
Mounting accuracy:±0.035mm(±0.025mm) CPK≥1.0
Number of components types: setting plate: Max 96 types(8mm) Tray: 15 ...
|
Pick & Place |
1. Mounting Speed: chip 21k CPH (IPC9850) / QFP 5.5K CPH (IPC9850)
2. Corresponding components: Max 0402-55mm (component height H = 15mm)
3. Mounting accuracy: Cbip +/- 50um (Cpk 1.0) / QFP +/- 30UM (Cpk 1.0)
4. Corresponding PCB: L460 * W400 * 1Lane (standard) / Max...
|
Pick & Place |
Brand: Panasonic
Number of feeder:104
spec:2200*1950*1560mm
power supply: 220v
...
|
Pick & Place |
90,000 CPH (0.040 sec / chip, optimum condition)
66,000 CPH: chip (according to IPC9850 standard)
0402 (01005) chip ~ 33.5mm square element (or diagonal length 47mm)
Laser recognition: ± 0.05mm (± 3)
Using a new linear servo motor and full clo...
|
Pick & Place |
Electronic board size: maximum: 457*356mm; minimum: 50*50mm
Electronic board thickness: 0.3 - 4.0mm
Component type: front side: the largest 40 species; rear side: 10 kinds of 10 layers / 20 kinds of 10 layers
Board loading time: 4.2 seconds
Mounting accurac...
|
Pick & Place |
Using precision guide rail and the import motor to drive the blade seat conversion, printing, and high accuracy.
Printing scraper can rotate 45 degrees fixed up, easy printing stencil and squeegee cleaning and replacement.
Block can be adjusted before and after the blade, to c...
|
Soldering - Other |
Size: 550*350*175mm
Material: conductive plastic
Surface resistance: 10 ^ 4-10 ^ 6 ohms
Quantity: 5pcs/ carton
Can put 32pcs 330 tray, widely used in electronics factory.
|
Tape and Reel Equipment |
Size: 410*190*110mm
Material: conductive plastic
Surface resistance: 10 ^ 4-10 ^ 6 ohms
Quantity: 20pcs/ carton
Can put 26pcs 180 tray, widely used in electronics factory.<...
|
Tape and Reel Equipment |
1, FS innovative patented heating wire heating technology, independent small circulation wind structure, up and down heating, can achieve greater wind capacity, with a high heat exchange rate, can reduce the temperature setting temperature, the heating element protection Function, especially suitabl...
|
Reflow |
1, All the main parts of the equipment are imported parts, long service life.
2, using the upper and lower two temperature control area, using PID automatic fuzzy temperature control system, high precision temperature control, high stability, temperature control accuracy and the measured temp...
|
Reflow |
1. Direct-mounted board structure, special stainless steel chain transmission, durable.
2. Preheat system using infrared direct thermal system, temperature control using PID mode, the temperature control accuracy of ± 2 ℃, can achieve the ideal lead-free solder preheating temperature. ...
|
Wave Soldering |
1. Direct-type board structure, special titanium claw chain transmission, durable;
2. Preheat system using hot air system, temperature control using PID mode, but the automatic adjustment of the voltage phase angle, so that the temperature control accuracy of ± 2 ℃, can achieve the ide...
|
Wave Soldering |