Seika Machinery, Inc.
Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products
Seika - Solutions for SMT Assembly
Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.
Some of the lines that we carry include the Tamura lead-free reflow ovens, Musashi conformal coating systems, Sayaka PCB routers, Hioki flying probe and in-circuit testers, Nihon Superior solder products, McDry ultra-low humidity storage cabinets and the Sawa ultrasonic stencil cleaners. Seika Machinery provides sales and technical support from the head office located in Torrance, California and the branch office in Atlanta, Georgia. The San Francisco branch has been established to serve the Silicon Valley in CA as well as to offer additional product offerings and technical support. A wide spread sales and distributor network in North America is established for Seika products.
Seika Machinery, Inc. Postings
29 products »
Sawa Ultrasonic Stencil Cleaners
Precision Fine Pitch Aperture Cleaners Thousands of dollars less than fully-automatic cleaners Low solvent usage and running costs Fast cleaning time of 1-3 minutes Minimal waste...
Sawa Eco-Roll Stencil Cleaners
The Sawa Eco-Roll eliminates waste and saves money by reusing wiper rolls for printing machines. The SC-ER360 cleans wiper rolls in just 20 minutes and measures W900 x D850 x H1200 mm. Sawa Stencil Cleaners are widely used in the Japanes...
Sawa Eco-Nozzle Mounter Nozzle Cleaner
The Mounter Nozzle Cleaner cleans 20 nozzles at a time. With the system, ultrasonically-vibrated water thoroughly passes through every nozzle opening. Double-cleaning power is generated with ultrasonic-energy cleaning and simultaneous vacuum sucti...
Sawa Ecobrid LOW-VOC Fully-Automatic Stencil Cleaner
High-Performance Cleaning Features: Cleaning with Low-VOC Solvents Reduction of CO2 Emissions by 10% over conventional cleaner models Save $$ in Running Costs Fast Cleaning and Drying Time...
UC–250 Series, from Citizen’s established precision and machining technology, is specially designed for SMT line use. Able to clean top surface of PCB even chip components attached on the bottom side. Anti...
Seitec Selective Soldering System with Built-in Spray Fluxer
Designed For Use with Multilayer and High Density PCBs The STS-2533SJ is a new Selective soldering system equpped with a Servo Jet Spray Fluxer system. The Servo Jet system allows for precise flux application on small targets a...
Andes Multipoint Selective Soldering System
Uses customized and dedicated fixtures/nozzles which eliminates the use of masking tape Lead-free compatible The number of components on the PCB will not affect the tact time Able to control under the tempe...
SMEMA interface Slim & round design Double base plate structure Buzzer alarm function Decreased PCB stress by shockabsorber Safe tuning system by dual cylinder Cover des...
Inspect objects dynamically in 360 degrees with patented Hirox design Superior BGA inspection capable of up to 200x magnification. Low maintenance costs achieved with use of spring loaded lens tip to protect samples....
Functions combined in one bench-top cabinet In-circuit testing functions are assembled into a system or line to save space in the testing facility, enabling easy support of cell production. Macro test...
273 news releases »
Oct 06, 2022 | Seika Machinery, Inc. is pleased to announce plans to exhibit at SMTA International, scheduled to take place Nov 2-3, 2022 at the Minneapolis Convention Center in Minnesota. Seika will highlight the following equipment in Booth #1012: Malcom PCU-285 Viscometer, McDry Storage Cabinets, Sayaka CT23NJ PCB Router, Malcom RCX Series Modular Reflow Oven Profiling System and Unitech UC-250M-CV PCB Cleaner.
Seika Honored with 2022 Global Technology Award for the Sawa Eco-Roll
Sep 26, 2022 | Seika Machinery, Inc. is pleased to announce that was awarded a 2022 Mexico Technology Award in the category of Printing Equipment for its Sawa Eco-Roll SC-ER360 wiper roll cleaner. The award was announced during a ceremony that took place Wednesday, Sept. 21, 2022 during SMTA Guadalajara in Mexico.
Seika Machinery Offers Service and Repairs for Its Leading Brands
Aug 08, 2022 | Seika Machinery, Inc. is pleased to offer service and support for Sawa ultrasonic portable cleaners, SC-500HE and SC-5000GUS McDry dry cabinets, and calibration for Malcom viscometers.
Seika Machinery's Malcom RCX-1 Series offers complete monitoring of the reflow profiling process
Jul 16, 2022 | Seika Machinery, Inc. is pleased to offer the Malcom RCX Modular Profiler System with Video Camera. The Malcom RCX-C is an onboard camera system that can track and record a video of the PCB in the reflow oven.
Seika Machinery's Malcom Wetting Balance Tester Takes Testing a Step Further
Jul 08, 2022 | Seika Machinery, Inc. takes the "Dip & Look" method to the next level. The Malcom SWB-2 Wetting Balance Tester measures the wetting forces during the soldering process. To see the system in action, visit https://seikausa.com/electronics-mfg-equipment/process-control-equipment/malcom-wetting-tester.
Seika Machinery Presents New Flagship Viscometer from Malcom
Jun 24, 2022 | Seika Machinery, Inc. is pleased to introduce Malcom's new flagship CE certified viscometer as the industry standard for testing solder paste viscosity. The new Malcom PCU-285 Viscometer features an onboard PC with a full LCD touchscreen display. The heating also has been improved for faster and more stable temperature control.
Summer Sale on Select McDry Dry Cabinets
Jun 16, 2022 | Seika Machinery, Inc. today announced its summer sale on select McDry models. The company has brought in many popular models to meet demand and is offering a discount for a limited time.
Seika's Sawa Eco-Roll Reduces Waste and Saves Money
Jun 16, 2022 | Seika Machinery, Inc. is pleased to announce that implementation of its Sawa Eco-Roll SC-ER360 wiper roll cleaner may provide a 50 percent reduction in costs. The Sawa Eco-Roll eliminates waste and saves money by reusing wiper rolls for printing machines.
Seika Announces Inventory Sale on Stock SAYAKA PCB Routers
Jun 02, 2022 | Seika Machinery, Inc. is pleased to announce an inventory sale on stock SAYAKA PCB routers, including the SAM-CT23Q, SAM-CT23S, SAM-CT35Q, SAM-CT23NJ and SAM-CT56NJ. Additionally, the SAM-CT34XJ PCB Router is now available for demonstration at Seika's Headquarters and Demonstration Center in Torrance.
Seika Offers Optimized Sawa Mask Condition Checker with New Options
Apr 28, 2022 | Seika Machinery, Inc. is pleased to announce that it has optimized its Sawa SCI-MCC (Mask Condition Checker) for the North American market with a variety of mask sizes, with power and language set upon order for its user base. The Sawa SCI-MCC is designed for metal stencil opening inspection.
