SMT Equipment

EP-837 Two-part Epoxy Staking Adhesive

Company Information:

Supplier of high quality engineered materials, including conductive and resistive inks, UV curable dielectrics and insulators, adhesives, coatings, transducer inks and potting compounds.

Hudson, New Hampshire, USA


  • Phone (603)595-6221
  • Fax (603)595-6228

See Supplier Website »

Company Postings:

(8) products in the catalog

(1) technical library article

(3) news releases

EP-837 Two-part Epoxy Staking Adhesive

EP-837 Two-part Epoxy Staking Adhesive


EP-837 Two-part Epoxy Staking Adhesive



Offered by:

Conductive Compounds, Inc.


EP-837 Two-part Epoxy Staking Adhesive Description:

Suitable for dot dispense or stencil applications, and exhibits excellent adhesion to most metal and plastic substrates.

EP-837 is designed for component attachment, termination and other applications where low temperature curing conditions are required.

EP-837 has excellent temperature resistance, toughness, and allows for differences in coefficients of thermal expansion between two bonded substrates. Lateral component push-off testing on print treated polyester substrates (PET) show that EP-837 has 30 to 40% greater bond strength than other conductive epoxy adhesives.

Curing Schedule: (Time at Temperature / 90% Cure / Complete Cure):

  • 20°C / 48h / 72 hours+
  • 140°C / 10-20 minutes / 30-40 minutes

Typical Properties:


Part A

Part B


Clear thick liquid

Straw colored liquid

Mix Ratio

100 parts A (by weight) to 55 parts B

Shelf Life (Unmixed)

6 months in unopened container

Pot Life (25 Grams, Room Temperature)

> 6 hours

Thin Film Set Time (.001" @ 25°C)

>12 hours

Total % NV Solids


Hegman Gauge


Volume Resistivity (ref. ASTM D-257)

<1.0 x 10-15ω-cm

Operating Temperature Range (Fully Cured)

-55°C To +125°C continuous intermittent at higher temperatures

Application Guidelines

Dot dispensing can be accomplished utilizing positive displacement or pneumatic actuated equipment. EP-837 exhibits quick breakoff after dispensing in high speed automated production processes. In small volume production environments, EP-837 can be mixed and manually loaded into syringes for dispensing with hand held equipment.

The rheological properties of EP-837 allow for accurate and repeatable dot geometries over a four hour window. While the viscosity of the mixed material will change over four hours, most dot dispense equipment can easily compensate for the rheological changes to accurately maintain dot configuration.


EP-837 is available in pre-weighed open containers, or pre-weighed, separated plastic pouches (CC-Paks). There is no minimum purchase quantity with either packaging configuration, and open containers can be ordered with any specified amount of material.

Guidelines are intended to provide a starting point for evaluation. Conductive Compounds, Inc. recognizes that each customer’s manufacturing process is unique, and we are available to provide technical assistance to resolve your processing issues. Call us to discuss your application in more detail.

The properties are accurate to the best of our knowledge and Conductive Compounds, Inc. makes no guarantees for customer specifications established in applications where this product is used. Customer assumes responsibility for determining fitness of use in their particular application.

Conductive Compounds, Inc. can modify the cure speed, working time, or rheology of EP-837 to make it more compatible with your unique manufacturing process.

EP-837 Two-part Epoxy Staking Adhesive was added in Jun 2013

EP-837 Two-part Epoxy Staking Adhesive has been viewed 609 times

7 More Products from Conductive Compounds, Inc. :

convection smt reflow ovens

Fluid Dispensers