Desktop Economy PCB Coating Machine Offline Manual With Teach Pendant LCD
Company Information:
Name: |
Desktop Economy PCB Coating Machine Offline Manual With Teach Pendant LCD |
Category: |
|
Offered by: |
|
Desktop Economy PCB Coating Machine Offline Manual With Teach Pendant LCD Description:
Desktop economy PCB conformal coating machine,offline pcb coating equipment
Desktop economy PCB conformal coating machine/offline conformal coating machine
Are you looking for the best and most highly reliable desktop economy conformal coating machine? Then you are on the right page. If we talk about machines production, then how can we forget China.
China is one of the best manufacturers in the world. Today, we are here with the review of the CNSMT desktop PCB conformal coating machine. CNSMT is one of the best manufacturing companies that are located in China. CNSMT has produced multiple products for the use of consumers to make their work easier.
CNSMT has developed a new model of desktop economy selective coating machine, to save your investment cost and also to decrease your SMT factory cost. This type of CNSMT conformal coating machine for PCB comes up with a low price and high-quality features.
This product is lucrative for those consumers who are fresher's in the SMT factory and don't have enough budget to buy an online PCB conformal coating machine. Let’s start moving through this page to check a complete desktop economy PCB conformal coating machine review.
Features of CNSMT PCB desktop economy conformal coating machine:
Equipment performance description:
1. Chinese and English keyboard operation, easy to learn and understand;
2. It has the functions of drawing points, lines, surfaces, arcs, circles. Irregular curve continuous interpolation and three-axis linkage;
3. The software has functions such as area array and translation operation;
4. Equipped with 1 rubber valve;
5. Rubber valve cleaning device;
6.Independent paint container barrel.
Operation method | MCU control |
Programmatically | Manual teaching |
Running program storage number | More than 50 |
Processing range | 500/500/100 |
Maximum load | 10 kg / 5 kg |
Maximum movement speed | 400 mm/s |
Display method | Teach Pendant LCD |
Motor system | Three-phase micro stepping precision motor |
Edit mode | Teaching box/PC |
Number of spray valves | 1 piece |
Spray valve type | Conical atomization valve |
Tank volume | One 10L stainless steel inner barrel pressure barrel + One small cleaning pressure barrel Rust steel cleaning pressure barrel |
power supply | AC220V |
Gas source | 4-6kgf/cm2 |
Total power | 0.6KW |
Easy to understand and operate:
The best feature of the CNSMT PCB desktop is that its keyboard operation is available both in Chinese and English. Because of this feature, it is easy to understand and operate. It is difficult to perform the inspection process sometimes due to poor software that has low accuracy and is less stable.
But CNSMT desktop economy conformal coating machine has absolute accuracy and precision and because of this feature, it becomes easy to operate the machine.
Three axes available:
It has high speed and a highly reliable and stable controlling system. Three axes are available in this machine, and it is capable of performing multiple functions, such as drawing points, lines, surfaces, arcs, circles, irregular curves, and three axes linkage.
The X and Y-axis of the machine act as a control system.
It controls the function of the machine and permits fast and accurate movement. The three axes X, Y, and Z enables accurate selecting of spray for various printed circuit boards. In this way, we can complete the spraying of high-density and complex circuit boards.
Allowing technical functions to be performed:
Another best feature of the CNSMT PCB desktop conformal coating machine is that it allows different functions to be performed, such as area array and translation operation. Moreover, it also allows programmers to measure, set, record, and trace process parameters.
It can coat the edge of the device effectively, eliminating the shadowing effect of spraying. The device is capable of automatic narrowing and widening functions.
Rubber valve:
It consists of a rubber valve cleaning device. Rubber valves are being used as nozzles in the desktop economy machine. Rubber valves are very simply constructed and usually consist of three parts.
There are several benefits of rubber valves. Firstly they are highly flexible and due to their flexibility, they can easily be interchanged with the new one if they get defected.
It reduces the air consumption energy in the desktop economy machine and also reduces the total energy cost. It is equipped with one rubber valve. It is independent of the paint container barrel.
Accuracy:
It works at very high accuracy and helps to improve the functioning of the machine. Accuracy plays an important in every machine because if the accuracy of the machine is low or poor then the machine cannot produce accurate results.
So the accuracy should be very high so that the machine can perform the functions more efficiently and in this way the consumers can get accurate results.
CNSMT PCB desktop economy conformal coating machine has an accuracy of about +0.01mm. That is enough for the machine to produce accurate results.
Other features of the product:
- Operation is being performed under MCU control.
- The total power of the machine is 0.6kw
- The storage number of the running program is more than 50
- It has a gas source of about 4-6kgf/cm2
- Its processing range is about 500/500/100
- It supplies power about 220V
- It can carry a maximum load of about 10kg/5kg
- Its maximum movement speed is 400m/s
Different methods of applying conformal coating:
Whether you are using a desktop conformal coating machine or its other types for PCBs, if the applying method is not correct, then you will face some serious problems. It can cause damage to your product. In this section, we are going to share some ideal methods of applying the coating.
Brushing coating:
Brushing coating is a potentially very simple and easy technique to apply the coating. It is widely used in many different industries such as the aerospace industry. One of the largest contractors of the aerospace industry relies on brush coating for its conformal coating processes. It is important to use high-quality artists' brushes that are being made with non-conductive natural fibers.
It is important that the brush coating is being performed in the booth area space. Booth is a highly protected place where the operators perform their functions. We have to face three challenges while doing brush coating with our hands.
The first challenge that we have to face is to achieve suitable coating thickness. The second challenge is to ensure a reasonable degree of uniformity. Formation of air bubbles can occur and it's the third challenge that we have to face to we have to eliminate them.
It is important to load the brush with sufficient material. The brush should just touch the surface of the material without making contact with the board or components. If accidentally it made contact with the components or board, it is likely to produce bubbles. Some operators prefer thinner material so that they can reduce the viscosity, while some other operators prefer a thicker material.
Aerosol coating:
The aerosol coating is one of the most effective ways of applying coatings for small-scale production. The aerosol coating is widely used to eliminate some potential problems that you may find with an atomized spray gun. There are some considerations that you must keep in your mind while doing coating via aerosol.
The first thing that you must keep in your mind while doing coating via aerosol is that don't shake the coating before applying as it can produce bubbles inside the mixture that can be transferred to the board and can affect its functioning. So avoid shaking.
The board should be at an angle of 40 degrees at a distance of 20-30cm. spray the board in a continuous Z steady motion. After that rotate the board to 90 degrees, repeat the process until you have rotated the board completely to 360 degrees.
Pros of desktop economy PCB conformal coating machine:
- The first benefit of this machine is that it has insulation and heat-resisting properties. Insulating properties allows a reduction in PCB conductor.
- They are light in weight so we can carry them easily.
- They are low in price and are for those consumers who cannot buy the machine as it is very expensive over their so they can have it offline at a reasonable price.
- Can help to eliminate the need for complex and sophisticated enclosures.
- It protects PCB components. Completely protect the assembly against chemical and corrosive attacks.
- Eliminate potential performance degradation due to environmental hazards. Reduce environmental hazards to PCB boards and prevent the entry of pollutants.
- Minimize environmental stress on PCB assemblies.
- It extends the life of a printed circuit board and enhances its reliability.
- Its method of applying is very easy.
Cons:
- Once the coating is applied it is very difficult to remove.
- It has low abrasion resistance and can cause shrinkage during the curing process.
Conclusion:
CNSMT PCB desktop conformal coating machine is being designed for consumers who have a low budget. It is available at a low cost and is highly reliable.
It works at great speed and less the work of the consumers. It comes up with several features including its keyboard operation that is available both in Chinese and English, its high accuracy, having three axes XYZ and so on.
Different coating methods can be used to apply the coating that including brush coating, aerosol, and so on. Brush coating is a quite simple easy technique to apply coating. But you must use an artist's brush for this purpose that is made up of non-conductive natural fiber.
Selection coating is a highly effective and beneficial method as it allows you to select the areas to be coated that you want. Other methods include dip coating, aerosol coating, etc.
FAQS:
What is a desktop PCB coating machine?
A desktop PCB coating machine is an offline coating machine that is used to protect PCBs from harsh environments and other physical factors that are influencing them. It is available at a low cost and it is the best choice for those consumers who have a low budget.
Why you should buy a desktop coating machine?
CNSMT coating machines come up with both online and offline coating machines. Buying online coating machines can be very expensive for those who are beginners. Desktop coating machines are available at a low cost and you can buy them easily. They are highly reliable and easy to use.
If it's our first time with a desktop PCB coating machine how to learn it?
CNSMT provides its consumers to have training online. In this training, you will learn how to use the machine. Even if you visit our factory we can teach you how to use the machine. So without any hesitation, you can join us online or offline to have the training.
Is desktop PCB coating machine with English system?
CNSMT desktop PCB coating machine has a keyboard operator both in English and Chinese. So it becomes easy for the consumers to understand. In this way, the consumer can use it easily.
Can it be exported overseas?
Yes, it can be exported overseas. It's for those consumers who live far away. CNSMT is always being trying to fulfill consumer requirements and always trying to make it easier for the clients to buy the machine even they are far away.
How can we make an order from your company?
- Send the name of the product that you need online or by email
- Confirm all the machine details and price, shipping, payment methods, and some other important requirements.
- Make a proforma invoice to confirm your order so that we can ship your order.
- Make the payment according to the invoice.
- 100 percent quality check before shipment.
If I am still not able to operate the machine after I receive it what I can do then?
If you are still not able to operate it then you can contact us online or by email our customer service support team is going to help you regarding this. So if you have any questions contact us we are always there to serve you.
How huge a team does CNSMT have? Are they professionals?
CNSMT is one of the best manufacturing companies. We have 50 salespeople in our office. In the factory, we have 210 techniques who work and produce new different products.
CNSMT is capable of handling all kinds of SMT business as we have a strong and professional team, not only in China but all over the world. To provide more special service for you we train our team every month to make sure that their skills are being polished every month.
Why choose us:
One of the reasons to choose CNSMT conformal coating machines is their quick response. Its 24/7 available and consumer can enjoy the quick and fastest response. CNSMT serves you at your ease and provides you with free technical support. CNSMT makes sure delivery of the order in time without any damage to it. It always provides you with high-quality equipment and is always there to support your business.
Our professional team ensures to give you the best condition machine. We provide online training to our consumers to use the machine without any cost.
Packing & Delivery
Certification
Company Information
CNSMT is the leading manufacturer and supplieir for SMT machines and Solution with over 10 years' experience in China. And we can also do OEM&ODM for SMT traders, we have vast of sources in SMT field,even you need used or new SMT equipments or other parts, we can help you get the best quality and competitive cost machines.
What we can do for you:
※ We have our own factory make SMT equipments and devices
※ We have a professional technich engineer team for produce machines
※ We can customize variety of SMT machines for you according your requirements
※ We buy and sell used and new SMT equipments all over the world
※ We provide you SMT full line machines and export to worldwide
※ Becoming the most reliable Chinese partner for you.
FAQ:
1. Are you factory?
Yes, we are factory supplier focus on humidity control for 14 years.
2. Can you email the catalog?
Yes, we can send you by email with whole catalog.
3. How to order online?
Confirm product (quantity, price, payment, shipping etc)---waiting for email ---confirm order---make initial payment---production finish---make balance payment---shipping
* click to learn about trade assurance
4. What about the payment way?
30% deposit, balance paid before delivery -- amount > USD5,000
100% deposit -- amount < USD5,000
5. What's the shipping way and timing?
We suggest to ship by sea to get cheapest rate, voyage date to America around 30~40 days, to Europe 25~30 days, to Asia and Austrilia 7~15 days. Click here to get exact timing.
6. What's the warranty item?
Warranty time normally is 12 months, if you want to extend the warranty time to 24 months, the value will be 10% more of your order.
7. Can I visit your factory?
Yes sure, welcome to visit our factory to get more profit.
8. How to contact with your factory?
Send inquiry in below form or send mail or call to select your way. Click here
9. Can you customize the product?
Yes, we can customize any products according to customer's requirements.
10. Which payment terms are you doing?
PayPal, West Union, T/T, (100% payment in advance.)
11. Which shipment is available?
By sea, by air ,by express or as your requirement.
12. Which country you have been exported?
We have been exported to many countries, all most all around the world, like Malaysia, Vietnam, Thailand, United States, France, Spain, Mexico, Dubai, Japan, Korea, Germany, Porland Etc.
Desktop Economy PCB Coating Machine Offline Manual With Teach Pendant LCD was added in Apr 2022
Desktop Economy PCB Coating Machine Offline Manual With Teach Pendant LCD has been viewed 442 times
20 More Products from CNSMT CO.LTD :