General Electric DS3800NPSE1E1G POWER SUPPLY
Company Information:
Name: |
General Electric DS3800NPSE1E1G POWER SUPPLY |
Category: |
|
Offered by: |
|
General Electric DS3800NPSE1E1G POWER SUPPLY Description:
ales Manager: Sandy Lin
Email: unity@mvme.cn
Skype:onlywnn_1
Mobile(Whatsapp): (+86)-18020776786
Yuehang:
Shipping Term : TNT,DHL,FEDEX,ETC
Payment Term : T/T
Warranty: 12 month
yuehang supply: New+original+factory sealed+high quality
Service: quotation will be sent in 9 hours
Skype + whatsapp + mobile = 24 hours /day Oneline.
Package: Original packing with cartons.
Delivery time: Shipped in 3 days after payment
AUTOMOTIVE COMPONENTS
Capricious consumer trends require manufacturing lines that are particularly flexible and able to create a variety of parts, or assemble several product lines without much alteration. As a result of this need for flexibility, manufacturing automotive components and assembling them is often the area in which robot-based automation can be seen at its best.
Intelligent manufacturing in the body shop aims to improve efficiency in casting parts. Forging a vehicle’s exterior parts like the fascia, bumpers and fuel tank, and producing interior parts like instrument panels, seats and air bags requiring very broad know-how and solutions based on robotics. Manufacturing the powertrain, chassis and the body of the vehicle also demands a great deal of precision.
Moore Automation Limited understands these requirements and works with car manufacturers to obtain the spare parts they need, as soon as possible. We specialise in identifying parts for machining, assembly, test, materials handling, safety and robot-based automation. We also offer a comprehensive and straightforward supply and repair service which can significantly reduce costs for your company.
General Electric DS3800NPSE1E1G POWER SUPPLY
General Electric DS3800NPSE1E1G POWER SUPPLY
General Electric DS3800NPSE1E1G POWER SUPPLY
The Start/Stop Logic is the logic involved in starting and stopping the unit. The
Auto/Manual Logic is the logic involved in selecting and operating the
integrated manual gate control. However, Blade Manual Control selection can
only be performed via the keypad. The Operating Logic is the logic involved in
normal operation of the unit. This includes Governor Reference selection,
raising and lowering of the setpoints, etc. The configuration for each of the
control sources is done in the Program Mode. Selection of the Priority Select
Lines necessitates that you configure your contact input signal(s) for Contact
Input Priority and/or Modbus Port Priority. Omitting this configuration will
result in your using strictly the keypad input to control the unit.
The load sharing analog input, used for synchronization, is disabled when
Contact Input Priority is selected (“Use Contact Input” DI is True).
Signal Input
Signal inputs are limited to special contact inputs which serve unique purposes
within the control, along with all of the analog inputs. These signals are always
available to the control and always cause some event within the control.
Contact Input. Table 5-2 gives a list of all of the contact inputs which fall
under the category of signal inputs. The signals are listed as they appear on the
front screen of the 505H during Program Mode.
Blade Lock Enable Lock the blades at their current location. See Blade
Control.
Blade Tilt Enable Position the blades at a preprogrammed position.
See Blade Control.
Contact Input Priority Select contact inputs for 505H via the Control
Interface.
Creep Input #1 Input #1 for the Creep Detection logic.
Creep Input #2 Input #2 for the Creep Detection logic.
Generator Breaker Contact indicating the generator breaker is closed.
See Status Engine.
Modbus(R) Port Priority Select Modbus port for 505H control via the Control
Interface.
Position Control Select Select Position Control for Governor Operation in
the on-line statuses.
Start Permissive External start permissive (from gate lock, etc.). See
Status Engine.
Table 5-2. Signal Contact Inputs
Analog Input. Table 5-3 gives a list of all of the analog inputs available within
the 505H. The signals are listed as they appear on the front screen of the 505H
during Program Mode. All analog inputs are considered valid within the default
range of 2-22 mA. The min and max values on the analog inputs are tunable
from Debug. The signal failure will occur any time the input value is detected to
be above or below the min or max value. A delay time on the signal latch can be
tuned from Debug. The analog input signals also have signal filtering that can
be adjusted from Debug (refer to Debug in Chapter 10). Offset and gain
adjustments are available for all analog inputs. See Appendix B for more
6ES7312-5BD00-0AB0 CPU312C CPU 312C Compact Siemens
6ES7312-5BD01-0AB0 CPU312C CPU 312C Compact with MPI Siemens
6ES7312-5BE03-0AB0 CPU312C Simatic S7-300 CPU 312C Compact Siemens
6ES7312-5BF04-0AB0 CPU 312C CPU312C Processor Module Siemens
6ES7313-1AD00-0AB0 CPU 313 CPU 313 Processor Module Siemens
6ES7313-1AD01-0AB0 CPU 313 CPU 313 Processor Module Siemens
6ES7313-1AD02-0AB0 CPU 313 CPU 313 Processor Module Siemens
6ES7313-1AD03-0AB0 CPU 313 CPU 313 Processor Module Siemens
6ES7313-5BE00-0AB0 CPU 313C CPU 313C Module Siemens
6ES7313-5BE01-0AB0 CPU 313C CPU 313C Compact CPU Siemens
6ES7313-5BE03-0AB0 CPU 313C CPU 313C Compact CPU Siemens
6ES7313-5BF03-0AB0 CPU 313C Compact CPU313C Siemens
6ES7313-5BG04-0AB0 CPU 313C Compact CPU with MPI Siemens
6ES7313-6BE00-0AB0 CPU313C-2 PTP CPU313C-2 PTP Compact CPU Module with MPI Siemens
6ES7313-6BE01-0AB0 CPU313C-2 PTP CPU313C-2 PTP Compact CPU Module with MPI Siemens
6ES7313-6BF03-0AB0 CPU313C-2 PTP CPU313C-2 PTP Compact CPU Module with MPI Siemens
6ES7313-6BG04-0AB0 CPU 313C-2 PtP CPU313C-2 PtP Processor Module Siemens
6ES7313-6CE00-0AB0 CPU313C-2DP CPU 313C-2DP Siemens
6ES7313-6CE01-0AB0 CPU313C-2DP CPU 313C-2 DP Compact CPU Siemens
6ES7313-6CF01-0AB0 CPU 313C-2 DP CPU 313C-2 DP Compact CPU with MPI Siemens
6ES7313-6CF03-0AB0 CPU 313C-2 DP CPU 313C-2 DP Compact CPU with MPI Siemens
6ES7313-6CG04-0AB0 CPU 313C-2 DP CPU 313C-2 DP Processor Module Siemens
6ES7314-1AE01-0AB0 CPU 314 Simatic S7-300 CPU 314 Siemens
6ES7314-1AE02-0AB0 CPU 314 Simatic S7-300 CPU 314 Siemens
6ES7314-1AE03-0AB0 CPU 314 Simatic S7-300 CPU 314 Siemens
6ES7314-1AE04-0AB0 CPU 314 Simatic S7-300 CPU 314 Siemens
6ES7314-1AF10-0AB0 CPU 314 Simatic S7-300 CPU 314 Siemens
6ES7314-1AF11-0AB0 CPU314 CPU314 Processor Module Siemens
6ES7314-1AG13-0AB0 CPU314 CPU314 Processor Module Siemens
6ES7314-1AG14-0AB0 CPU314 CPU314 Processor Module Siemens
6ES7314-5AE00-0AB0 CPU314 IFM CPU314 IFM Module Siemens
6ES7314-5AE01-0AB0 CPU314 IFM CPU314 IFM Module Siemens
6ES7314-5AE02-0AB0 CPU314 IFM S7-300 CPU314 IFM Siemens
6ES7314-5AE03-0AB0 CPU314 IFM S7-300 CPU314 IFM Siemens
6ES7314-5AE10-0AB0 CPU314 IFM CPU314 IFM Module Siemens
6ES7314-6BF00-0AB0 CPU314C-2PTP CPU314C-2PTP Siemens
6ES7314-6BF01-0AB0 CPU 314C-2 PTP CPU 314C-2 PTP Compact CPU With MPI Siemens
6ES7314-6BF02-0AB0 CPU314C-2PTP CPU314C-2PTP Siemens
6ES7314-6BG03-0AB0 CPU 314C-2 PTP CPU 314C-2 PTP Compact CPU With MPI Siemens
6ES7314-6BH04-0AB0 CPU314C-2PTP CPU314C-2PTP Processor Module Siemens
6ES7314-6CF00-0AB0 CPU314C-2DP CPU314C-2DP Siemens
6ES7314-6CF01-0AB0 CPU314C-2DP CPU314C-2DP Processor Module Siemens
6ES7314-6CF02-0AB0 CPU314C-2DP CPU314C-2DP Processor Module Siemens
6ES7314-6CG03-0AB0 CPU314C-2DP CPU 314C-2DP Compact CPU with MPI Siemens
6ES7314-6CH04-0AB0 CPU 314C-2 DP CPU314C-2 DP Processor Siemens
6ES7314-6EH04-0AB0 CPU 314C-2PN/DP CPU 314C-2PN/DP Compact CPU Siemens
6ES7315-1AF00-0AB0 CPU315 Simatic S7-300 CPU 315 Siemens
6ES7315-1AF01-0AB0 CPU315-1 Simatic S7-300 CPU 315 Siemens
6ES7315-1AF02-0AB0 CPU315-1 S7-300 CPU315-1 24VDC Siemens
6ES7315-1AF03-0AB0 CPU315-1 Simatic S7-300 CPU 315 Siemens
General Electric DS3800NPSE1E1G POWER SUPPLY was added in Mar 2018
General Electric DS3800NPSE1E1G POWER SUPPLY has been viewed 179 times
20 More Products from XIAMEN YUEHANG COMPUTER ENGINEERING CO.LTD. :