GE Intelligent Platforms VMIVME-7750-746000

GE Intelligent Platforms VMIVME-7750-746000 Description:

Contact: Nancy Lin

Email:info@amikon.cn

Skype:onlywnn_1

Telegram:+8618020776786

Mobile(Whatsapp): (+86)-18020776786

QQ :2851195456

​​​

Control Systems (DCS, PLC/SPS, CNC)

- Panel Controllers

- HMI and Display Panels

- Industrial PC’s

- Drives ( Frequency Inverter and Servo)

- Motors

- Power Supplies

Amikon adhering to the enterprise concept of excellence, whether it is industrial automation parts, services or delivery efficiency, we are committed to do better.

We deliver a variety of parts.Email:info@amikon.cn

Machines break and downtime can cost companies millions in lost revenue. Our multi-lingual team scour the globe to find quality obsolete, new and reconditioned parts to get industrial machines back up and running at the best price.

Whether it's service, speed or delivery, we always deliver more.Email:info@amikon.cn

Amikon Limited specialises in supplying automation equipment to specific industry sectors. We work with some of the worlds largest companies & our knowledge and expertise is regularly featured in industry publications across the globe.Email:info@amikon.cn

WE DELIVER MORE SERVICE

Excellent service is woven into the very fabric of our operations. It’s also where we invest the most – merging the very best of talent with bespoke technology to enable us to ensure we always deliver more for our customers.Email:info@amikon.cn

GE Intelligent Platforms VMIVME-7750-746000

GE Intelligent Platforms VMIVME-7750-746000

GE Intelligent Platforms VMIVME-7750-746000

Th

 Functional Characteristics
Microprocessor: The VMIVME-7750* brings the Intel Pentium III
processor to VME, offering processor speeds up to 1.26 GHz. The
Pentium III processor has 32-bit addressing and a 64-bit data
bus. Its superscalar architecture allows three instructions to be
executed per clock cycle. A dynamic branch prediction unit,
separate instruction and data caches, and MMX™ technology
also increase the processor’s performance. The Pentium III
processor also provides 256 Kbyte (1.26 GHz has 512 Kbyte) of
advanced transfer cache (on-die, full speed level 2 cache) using
dual independent bus architecture for high bandwidth and
performance. This L2 cache operates at the same clock
frequency as the processor, thus improving performance.
DRAM Memory: The VMIVME-7750 accepts one 144-pin SDRAM
SODIMM for a maximum memory capacity of 512 Mbyte. The
DRAM is dual ported to the VME
Ethernet Controller: The VMIVME-7750 supports Ethernet LANs
with two Intel Ethernet controllers (one 82559 and the other
internal to Intel’s chipset ICH2). 10BaseT and 100BaseTX options
are supported via two RJ45 connectors. Remote LAN booting is
supported.
Remote Ethernet Booting: The VMIVME-7750 utilizes Lanworks
Technologies, Inc.’s BootWare®. BootWare provides the ability to
remotely boot the VMIVME-7750 using NetWare, TCP/IP, or RPL
network protocols.
BootWare Features:
• NetWare, TCP/IP, RPL network protocol support
• Unparalleled boot sector virus protection
• Detailed boot configuration screens
• Comprehensive diagnostics
• Optional disabling of local boots
• Dual-boot option lets users select network or local booting
Serial Ports: Two 16550-compatible serial ports are featured on
the VMIVME-7750 front panel. The serial channel has a 16-byte
FIFO to support baud rates up to 115 Kbaud. Requires two
micro-DB9 to standard DB9 adapters, GE P/N 360-010050-001.
Keyboard and Mouse Ports: The VMIVME-7750 has a combined
PS/2 keyboard and mouse connector. A Y-adapter cable is
included.
Flash Memory: The VMIVME-7750 provides up to 1 Gbyte of IDE
CompactFlash memory accessible through the secondary IDE
port. The VMIVME-7750 BIOS includes an option to allow the
board to boot from the Flash memory.
Timers: The VMIVME-7750 provides the user with two 16-bit
timers and two 32-bit timers (in addition to system timers).
These timers are mapped in I/O space, and are completely
software programmable.
Watchdog Timer: The VMIVME-7750 provides a softwareprogrammable
watchdog timer. The watchdog timer is enabled
under software control. Once the watchdog timer is enabled,
software must access the timer within the specified timer period
or a timeout will occur. A user jumper allows the timeout to
cause a reset. Independent of the jumper, software can enable
the watchdog timeout to cause a nonmaskable interrupt (NMI)
or a VMEbus SYSFAIL.
Nonvolatile SRAM: The VMIVME-7750 provides 32 Kbyte of
nonvolatile SRAM. The contents of the SRAM are preserved when
+5V power is interrupted or removed from the unit.
PMC Expansion Site: The VMIVME-7750 supports IEEE P1386
common mezzanine card specification with a 5V PCI mezzanine
card (PMC) expansion site. The PMC site provides for standard
I/O out the VMEbus front panel. An optional I/O connection to
the VMEbus P2 connection can be provided.
Contact GE for more information concerning PMC modules and
compatibility.
Universal Serial Bus (USB): The VMIVME-7750 provides a front
panel dual connection hub host controller for the USB.
Supported USB features include: isochronous data transfers,
asynchronous messaging, self-identification and configuration
of peripherals, and dynamic (hot) attachment.
VMEbus Interface: The VMIVME-7750 VMEbus interface is based
on the Universe IIB high performance PCI-to-VME interface from
Newbridge/Tundra.
System Controller: The VMEbus system controller capabilities
allow the board to operate as a slot 1 controller, or it may be
disabled when another board is acting as the system controller.
The system controller may be programmed to provide the
following modes of arbitration:
Round Robin (RRS)
Single Level (SGL)
Priority (PRI)
The system controller provides a SYSCLK driver, IACK* daisychain
driver, and a VMEbus access timeout timer. The system
controller also provides an arbitration timeout if BBSY* is not
seen within a specified period after a BGOUT* signal is issued.
This period is programmable for 16 or 256 µs. 

SQUARE D 8501 CO15V24 

800T-PTL16G Allen Bradley 800T 

Telemecanique Selector Switch 3 PositionReturn (non maint)with ZBE-101 

Square D 9001 LMA1 W/ PUSH BUTTON

SQUARE D 9001 KR-5RSER F 

Eaton Cutler Hammer42-1395-5 Push Button 120V 60CY

Square D GREEN Pushbutton PilotLight 120v Push to Test Used 9001 KM1

Killark Stahl 8003/4

Allen Bradley Red Pushbutton 800MR-B6 Series A with 800M-XAS

Telemecanique RED Extended Head ZBE-102

EAO Pushbutton 704.910.4 Red 

Square D 9423 M4 

SQUARE D 8501CO6V24Ser C 

Allen Bradley 800T-H2 2 POS 

SQUARE D 9065 AR0-1R

Cutler Hammer E22XG1D 3 Position 

Westinghouse PB3PU 6717C19G21 

Allen Bradley 800T-J42 Series T with 800T-XA 

Allen Bradley 800T-J2 

Square D2 Position Momentary Selector Switch new in Box 9001SK34B

Square D2 Position Momentary Selector Switch new in Box 9001SK25B

9001KM1 SQUARE D PILOT LIGHT Class 9001

SQUARE D PILOT LIGHT 9001TP-19

Schneider Electric 1hole pushbutton XALK178FH7 

SQUARE D3 Position Maintained Selector Switch 9001 SKS-42B 

Red Illuminated Pushbutton Operator Class 9001 D2Y1R 

SQUARE D Push Button OperatorGreen Illuminated 9001 D2Y1G 

Rees 4300-979 949-6607 

EAO 704.950.0 RED "OFF" Push Button withBase 704.910.4

Telemecanique Red Push Pilot Light withZBE-101 and ZBV-G4

Telemecanique 3 Position Selector Switchwith ZBE 101 

Eaton M22-CK10 Red 

General Electrical CR104PXG48 

EAO 704.950.0 GreenPush Button with Base 704.900.3

FUJI RED JUMBO Mushroom Pushbutton Switch AR30B0R 250v 6A

General Electric GE2 Position maintained Selector Switch with CR104P 

Cutler Hammer 10250T-91000T 

OMRON G3NA-D210B 

Westinghouse PB1JAH2A Model A 

FURNAS Siemens pilotlight 52PY4E3 

Allen Bradley 800T-PT16 Ser T Red Pushbutton 120V 50/60Hz Type 4,13 w/ 800T-XA

Allen Bradley 800T-H2 Ser T Selector Switch W/ 800T-XD1 SerD and 800T-XAI 

Square D 9001 KR2U 

Allen Bradley800MR-JX9U s

Allen Bradley 800T-PB16 Series N Green 120V 50/60Hz With 800T-XA 

General Electric 080B11V Selector Switchw/ 080ADV 

Allen Bradley 800T-PB16 Series N Red Cap120V 50/60Hz With 800T-XA 

Allen Bradley 800T-PB16 Series T Green 120V 50/60Hz With 800T-XA 

Allen Bradley 800T-H17 

Square D 2 PositionPushbutton Square White 9001 KXREAAH56

SQUARE D Push Button Ser K 9001 SKR1U 

MMTC PBS-3 3 position Pushbutton station 5A 240V 

Allen Bradley 800T-H2 Series T SelectorSwitch W/ Two 800T-XA 

Schneider Electric Red Pushbutton Maintained Push Twist ToReturn ZBE-102 

Schneider Electric Red Pushbutton Maintained Push Twist ToReturn ZBE-101 

Square D C65122-172-50 Light Module 110-120 VAC 

M22-XLED230-T MOELLER GREEN 

EAO 704.950.0 Green"ON" Push Button with Base 704.900.3

Telemecanique Z BV95Illuminated 

Digitran 9-S-260 A 3Digit 

IDEC 2 PositionMaintained  HW1S-2TF10HW1S2TF10

Westinghouse PB1PM Padlockable 

Square D 9001 2 Position Selector 

Allen BradleyGreen Pushbutton Switch 4,13 800TA 800T

9001BG15 SQUARE D Pushbutton 

9001TR2 SQUARE D RedPushbutton 600v 9001 TR2

SQUARE D Momentary Push ButtonWhite Class 9001KXRA 

Square D Class 9001Type SKR1UH13 

Square D 8501 KPD-12

Telemecanique 2 Position Selector Switchwith ZBE 101 

Westinghouse PB2HAL7

Schneider Electric WHITE standard pushbutton with ZBE-101 

Sylvania Selector Switch 100T-CB10 600V 

Cutler Hammer 10250T1 1 N.O. 1 N.C. 

IEC 947-5-1 250V with Red Lens

Allen Bradley 800H-BK6A 

Allen Bradley 800T-P16 Series B 120V 50/60 Hz 

Cutler Hammer 10250T/91000T 

Westinghouse NP45812B 

Cutler Hammer I0250T/81000T Red 250V

Square D 9001 KA-3 Series G 

Cutler Hammer 10250T/91000T 

Cutler Hammer 10250T/91000T Contact Block with Amber Pilot Light 120V 50/60Hz

Cutler Hammer 10250T/91000T Contact Block with Red Pilot Light 120V 50/60Hz

Square D Selector Switch Class 9001 TypeKA-1 Series G 120-600V

Square D 9001 KA2 Series K Contact Blockwith 2 Position On/Off 

Allen Bradley800MR-QT24S Red 24VDC 

Square D 2 PositionPushbutton Square White 9001 KR2 KXREAAH7

Sprecher Schuh start stop DP74B23D3X20 D5P-LU2B233DL3X20

Cutler Hammer AMBERPilot Light 120v 6.3v lamp with 10250T 

Cutler Hammer RED Pilot Light 120v 6.3vlamp with 10250T 

Telemecanique RED Pushbutton ZBE-102

Telemecanique BlackPushbutton ZBE-101

Telemecanique Red Pushbutton with ZBE-102