Selective Wave Soldering Machine
Company Information:
Name: |
Selective Wave Soldering Machine |
Category: |
|
Offered by: |
|
Selective Wave Soldering Machine Description:
Selective Wave Soldering Machine
- max solder temperature 350℃
- solder pot capacity 15 KG
- dimension L1280mm X W1400mm X H1650mm
- Net weight 380KG
- Product description: max solder temperature 350℃ ,solder pot capacity 15 KG,dimension L1280mm X W1400mm X H1650mm,Net weight 380KG
Selective Wave Soldering Machine
Specifications:
selective wave soldering machine with automatic system and easy wave soldering process for led outdoor display
we not only have the standard wave soldering machine, but also have the selective wave solder machine which include online and offline!
Introduce:
1.More and more competition in the electronics market, to the electronic product manufacturing enterprises bring huge quality and cost pressures.Electronic products production process of high density, miniaturization trend driving the rapid development of SMT technology, the traditional wave soldering process have been unable to meet the needs of the few remaining perforation components of welding, and manual mode is difficult to for large heat capacity or fine pitch components to realize high quality, high efficiency welding, the machinery, equipment and labor cost advantage is gradually lost.Mini selective wave soldering technology to the development of electronic product manufacturing engineers provide a new choice, at the same time, choose welding low running cost and high applicability to quickly get the welcome of electronic products manufacturers.
2.Selective wave soldering system is a kind of controlled by the program, the installation will help flux nozzle and tin furnace of multi-axis control platform.PCB online via rail transportation after positioning, will first spray flux accurately on the PCB for welding on site, and then through a small nozzle (usually 2 ~ 4 mm) in diameter and solder pump to create an accurate circular mini solder wave, after multi-axis control platform, from the bottom of the PCB welding.Due to welding components usually surrounded by SMT components, and high density, small spacing, in order to avoid damage to the bottom of the adjacent components and welding plate, selecting welding process must be very precise.
3.Selective wave soldering system of process control, no matter from movement, process speed, or unlimited direction control (X, Y, Z), temperature and heat control, its function is very powerful.Selective wave soldering during welding, welding parameters of each solder joint can be "tailored", enough process adjustment space to each spot welding conditions (such as: flux spraying quantity, welding time, welding height, wave height) transferred to the best, the defect rate reduce.All the control parameters settings can be saved to the program, at any time during production, can bring up the related data from the program.Therefore, if the system is properly maintained, a few years later, the quality of welding is still the same.
Machine breakdown show
Composition of1:Machine software system
A.With completely independent intellectual property rights of choosing welding software, combined with years of choosing welding using technology, based on the development of the WINDOWS software function, humanized operation with good traceability.
B.PCB pictures or GERBER file can be directly used for the path programming, the path to the starting point, the welding speed, idle motion speed, height of Z axis, such as wave height can be set on the computer.Domestic equipment industry the only can import the two formats of programming software.
C. after compiling the path of a piece of plate, can through the array function to path of makeup, at the same time on the choice of welding fixture some location of PCB.
D.the real-time display of welding process.Through the camera to the computer software, can take photo of the welding process, video recording and preservation.
E.the database function.Customers to use software increases with time, and constantly add solder and flux, the kinds of record is generated for each product, the more perfect.Record to welding different kinds products using flux, solder type, welding parameters, product parameters, etc.
F.Key parameters of the software completely monitoring, such as temperature, speed, air pressure, the nitrogen pressure and so on.
G.It can be upgraded to automatic wave height correction function.How many pieces of plate can be set interval correction wave height at a time.
H.It can be upgraded to take MARK point positioning and the frequency of use.
Composition of2:Motion platform system
A.motion platform design whole aluminum casting, lightweight design, and to improve the running speed of the platform rigidity.
B.Panasonic servo driver provided with Panasonic motor sports motivation, silver ball screw and linear guide for direction, positioning precision, low noise, smooth movement.
the mobile platform with dust-proof plate, prevent dirt drip into the ball screw.
Composition of 3:Spray part
A.the nozzle adopt Japanese origin atomization nozzle, atomization effect is good, and not easy blockage, suitable for various types of flux.Can be upgraded to choose German origin of jet nozzle, applies only to solid content less than 5% of flux.
B.flux filling and storage is adopted, and guarantee the spray pressure constant, the influence of flux is not helped by how much.Air pressure through the electronic gauge feedback to the computer monitor, in order to ensure the effect of the spray.
Composition of 4:Preheating part
A.All top and bottom with shoots the far infrared heating, the position is adjustable.
B.the heating rate can adjust the computer.
Composition of 5:Selective tin stove part
A.tin stove temperature, nitrogen gas temperature, wave height, wave correction, etc. Can be set in a computer
B.tin furnace tank for titanium alloy is made, no leakage.External type heating plate, uniform heat transfer.
C.tin stove adopts quick connector wire, tin stove replacement without rewiring.
D.nitrogen on-line heating devices, and ensure good wettability and reduce oxide tin stove.
F.tin stove with tin stove liquid level alarm.
G.the nitrogen pressure in through the electronic gauge feedback to the computer monitor, in order to ensure the effect of nitrogen protection.
machine parameters
Machine name |
Flason-450 |
General Function: |
|
dimension |
L1280mm X W1400mm X H1650mm |
general power |
5kw |
consumption power |
1--3kw |
power supply |
1 PH 220V 50HZ |
net weight |
380KG |
reuiqred air source |
3-5 Bars |
required air flow |
8-12L/min |
required N2 pressure |
3-4 Bars |
required N2 flow |
≥2m³/Hour |
required N2 purity |
≥99.998% |
required exhausting |
500--800CMB/H |
carrier or PCB |
|
carrier |
Customized |
max carrier size |
L450 X W300MM |
max solder area |
L400 X W300MM |
PCB thickness |
0.2mm-----6mm |
pcb edge |
3mm above |
controlling & conveyor |
|
Controlling System |
Industrial PC |
PCB Loading board method |
Manual |
PCB Unloading board method |
Manual |
Operating height |
900+/-30mm |
PCB conveyor up clearance |
50MM |
PCB conveyor bottom clearance |
30MM |
Motion table |
|
motion axis |
X, Y, Z |
motion control |
Servo control |
position accuracy |
+ / - 0.1 mm |
chassis |
Steel Constructure |
Flux management |
|
flux nozzle |
jet valve |
flux tank capacity |
1L |
flux tank |
压力罐 |
Preheat |
|
preheating method |
Bottom Infrared preheating |
heater’s power |
3kw |
temperature range |
25--240c degree |
solder pot |
|
standard pot number |
1 |
solder pot capacity |
15 kgs /oven |
solder temperature range |
PID |
melting time |
20--30 Minutes |
max solder temperature |
350℃ |
solder heater |
1.2kw |
solder nozzle |
|
nozzle dim |
Customized |
Nozzle material |
Steel alloy |
standard equipped nozzle |
5pcs/oven(inner 4mm x 3pcs,5mm,6mm ) |
N2 management |
|
N2 heater |
Standard |
N2 temp range |
0 - 350 C |
N2 consumption |
1---2m³/hour/nozzle |
Keywords:
Wave Soldering Machine Dual Lane Wave Soldering Machine China Wave Machine Wave Soldering Machine Manufactturer
Flason Electronic Co, Ltd provide a full SMT Assembly Line solutions, including SMT reflow oven, Wave Soldering Machine, Pick and Place Machine, solder paste printer, PCB loader, PCB unloader, SMT AOI Machine, SMT assembly line equipment, smt spare parts etc, any kind SMT machines you may need, please contact us by: wechat whatsapp:+86 13691605420,Skype: flasonsmt, Email: sales@flason.com
FAQ
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. Gold supplier on Alibaba !
B. Trade assurance to US$54,000 !
C. Best price & Best shipping & Best service !
When SMT matters to your business, partner with FLASON. Where innovation takes form. Mr Tommy, sales@flason.com
Wechat whatsapp:+8613691605420, skype:flasonsmt
SMT Reflow Oven
Pick and Place Machine
SMT Stencil Printer
Panasonic Feeder
JUKI Feeder
Samsung Nozzle
SMT Reflow Oven
Wave Sodlering Machine
Pick and Place Machine
SMT Stencil Printer
SMT Reflow Oven
Wave Soldering Machine
SMT Reflow Oven
JUKI Nozzle
JUKI Feeder
SMT Reflow Oven
SMT Feeder
SMT Nozzle
Samsung Feeder
SMT Assembly line
Reflow Oven
JUKI Feeder
Wave Soldering Machine
Pick and Place Machine
SMT Assembly Line
SMT Reflow Oven Manufacturer
Samsung Feeder
JUKI Feeder
SMT Reflow Oven
Wave Soldering Machine
Selective Wave Soldering Machine was added in Jul 2020
Selective Wave Soldering Machine has been viewed 99 times
20 More Products from Flasonsmt Co.,ltd :