Vacuum Sealing Machine For SMD Parts | SZTech-SMT

Vacuum Sealing Machine For SMD Parts | SZTech-SMT Description:

Vacuum Sealing Machine For SMD parts from SZTech SMT to store SMD parts in the ESD package with no air conditions.

Main specifications Of Vacuum Sealing Machine:

How to operate the vacuum sealing machine?

1. Turn on the power, and turn on the corresponding function according to the packaging requirements. If it is for suction sealing, turn on the suction function. If it is only sealing, then the machine can be used by default mode.

2. According to the packaging requirements, configure the pumping, inflation, sealing, cooling, and other parameters in sequence (the configuration of each parameter should be effectively configured according to the packaging requirements, we need to pay attention to the sealing time should not be too long, take a single-sided 8-wire vacuum bag as an example, the sealing time can be set to 00.8)

3. Pre-equip the packaging in the packaging bag (if there are sharp corners, please prepare for maintenance work to avoid puncturing the bag due to negative pressure in the bag after vacuuming).

Then place the packaging bag on the sealing strip, and ensure that there is a distance of about 1-2 cm between the air nozzle in the packaging bag and the control valve and the packaging (avoid being too close or too far away to affect the vacuuming effect), and Flatten the mouth of the bag with both hands to avoid the problem of poor sealing and air leakage caused by wrinkles at the mouth of the bag.

4. Step on the foot switch, and the machine can operate according to the pre-configured parameters.

5. After the work is completed, the bead is lifted, and we can take out the packaged materials, and then proceed to the next working cycle.