Industry Directory | Manufacturer
Manufacturer of automated production systems;PCB magazine loader,PCB separator,PCB cutting machine,PCB unloaders, PCB conveyors,PCB depaneling machines,PCB turn conveyors,PCB conformal coaters,PCB solder paste printer,PCB buffer
Industry Directory | Manufacturer
Manufacturer of Laser Cut & Chemical Etched Stencils.
Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified Jetting Pump and Ti
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulations, LED En
Electronics Forum | Thu May 29 17:19:51 EDT 2008 | dyoungquist
On 0402s we use 20x25 mil pads with a 15 mil gap between the pads on the pcb with ENIG finish, 5 mil stencil with a 1:1 aperture (20x25 mil) and SAC305 lead free solder paste. We very rarely see any tombstoning on 0402s using this setup.
Electronics Forum | Mon Aug 09 04:15:33 EDT 1999 | Jacqueline Coia
I am having cleaning problems when processing PCB's which have TAIYO solder mask on them. After processing, hand soldering and cleaning, a sticky residue is remains, resulting in a cosmetically poor finish with tide marks etc. Other soldermasks do no
Used SMT Equipment | SMT Equipment
Product Name :Panasoinc NPM module Product number: two modules NPM Detailed product introduction 2D inspection head function of NPM tape coating machine: 1, NPM check head resolution: 9 m 2, NPM check head vision: 21.1 * 17.6mm 3, check proc
Used SMT Equipment | SMT Equipment
Product Name :Panasoinc NPM module Product number: two modules NPM Detailed product introduction 2D inspection head function of NPM tape coating machine: 1, NPM check head resolution: 9 m 2, NPM check head vision: 21.1 * 17.6mm 3, check proc
Industry News | 2016-07-16 13:32:29.0
Advanced dispense technology is available for integration into your dispensing system. Continuously Volumetric, drip-and-drool free dispense technology can now be retrofitted into your dispense robot. GPD Global's Volumetric PCD pumps ensure the success of applications like underfill, LED encapsulation, solder mask, silicones, conductive ink, conformal coatings, and more. Improve your throughput and yields by retrofitting a Volumetric PCD Pump into your dispense system to simplify the dispense process.
Industry News | 2016-12-09 23:33:42.0
GPD Global offers advanced dispense pump technologies to upgrade your existing platform and take advantage of existing capital equipment. Retrofit your system with innovative dispensing technology for excellent dispense control and repeatability.
 21.jpg)
Parts & Supplies | Assembly Accessories
CAMERA PROTECTING MASK N610008157AA AI splicing masking tape (2000pcs/roll) AIS-2000 CAMERA PROTECTING MASK N610008157AA Disposable Mask KF 17.5*9.5 CM KN95 Face Mask MASK & PCB CLEANING SYSTEM MOREL 280 C&
Parts & Supplies | Assembly Accessories
Professional manufacturing Yamaha Yamaha Mounter suction nozzle, Feida. Yamaha Mounter original accessories (suction nozzle, inductor, cylinder, belt, filter cotton, etc.); Yamaha mounter, system board card, servo, motor maintenance; supply SMT consu
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2023-08-16 18:09:06.0
One of our customers involved with Electronics and Aerostructures requested a test to dispense Techspray Wondermask 2204 solder mask. The dispensing locations include large and small screw holes, single through-hole vias, and connector locations consisting of multiple through-hole vias. The process needed to run quickly and reliably.
http://www.gpd-global.com No drip no drool across a wide range of fluid viscosities (low-to-mid and low-to-high). No manual adjustment to compensate for pump variability. Truly Volumetric PCD Pumps for total control of dispensing fluids. Ability to
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulations, LED En
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Mon Apr 12 00:00:00 EDT 2021 - Mon Apr 12 00:00:00 EDT 2021 | ,
Europe Chapter Webinar: Tombstoning Components during Reflow Soldering - Causes & Cures
Events Calendar | Mon Sep 14 00:00:00 EDT 2020 - Mon Sep 14 00:00:00 EDT 2020 | ,
Printed Circuit Board (PCB) Inspection & Quality Control
Career Center | Mesa, Arizona USA | Production
Great opportunity with growing Tempe Company! Temp to hire Class II and III assemblers needed. First shift hours: Monday-Friday 6:45am to 3:15pm (half hour lunch) Second shift hours: Monday-Friday 3:30pm to 12:00am (half hour lunch) Class II s
Career Center | Space Coast, Florida USA | Engineering,Research and Development
Board Level Assembly BGA Expert! We are in need of an Electronic Packaging or Advanced Manufacturing Engineer to work with the Advanced Manufacturing Technology Group of a major Florida based Communications company. Support IR&D and Program activit
Career Center | Lalkua, India | Engineering,Maintenance,Production,Quality Control,Research and Development,Technical Support
Machine maintenance Service and support knowledge with customer satisfactory. Deal with customers at all level via phone,remote and mail.Sound knowledge of PCB fabrication machine.
Career Center | , | Engineering,Production
Project Management, SMT Process Engineering
Selective Solder Paste Deposition Reliability Test Results If you don't see images please visit online version at: #Application.SmtNet.baseURL#/express News • Forums • SMT Equipment • Company Directory • Calendar • Career Center
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/asymtek/fluid-types/solder-mask
Solder Mask | Nordson ASYMTEK ASYMTEK Products Corporate | Global Directory | Languages Division Only All of Nordson Fluid Dispensing Systems Jets
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/controlling-solder-mask-paste-mask_topic658_post2261.html
Controlling Solder Mask & Paste Mask - PCB Libraries Forum Forum Home > PCB Footprint Expert > Questions & Answers New Posts FAQ Search Events Register Login Controlling Solder Mask
