Industry Directory | Equipment Dealer / Broker / Auctions / Manufacturer
Focusing on the SMT field for more than 18 years, kinds of smt spare parts,like feeder ,nozzles,motors,fitlers and smt machine,juki ,panasonic ,yamaha,siemens,samsung(hanhua) ; peripheral equipment ,conveyor,AOI,spi,reflow oven
Industry Directory | Manufacturer's Representative
MFG. REPRESENTATIVES IN SOUTHEAST USA NC/SC/GA/TN/MS/AL
New Equipment | Curing Equipment
A Pressure Cure Oven (PCO), or Autoclave, is used to minimize voiding and increase adhesion strength for bonding processes typically used in die attach and underfill applications. PCO pressurizes air into a rigid vessel and heats & cools with
Flux Free Formic Reflow Reflow in Formic Acid Vapor Heller has designed and built an production ready horizontal reflow oven for formic acid vapor. This new oven has been designed to meet Semi S2/S8 safety standards (including toxic gases). Form
Electronics Forum | Thu Feb 22 12:26:33 EST 2001 | traviss
I used a Blue M batch oven quite a bit to cure in works great. All you have to do is get the board up to cure temperature, 150C normally and your all set. It will probably be in there longer than the time required but at that low temperature it shoul
Electronics Forum | Wed Feb 21 16:03:14 EST 2001 | blnorman
You're right, manufacturers time/temps will vary. A single manufacturer will have a host of materials with different cure schedules. We currently use 2 epoxies that cure in 2 - 3 minutes at 150�C. One will also cure in 5 minutes at 125�C. Talk t
Used SMT Equipment | AOI / Automated Optical Inspection
YAMAHA AOI YSi-V MACHINE KLT-000 1. Model: Yamaha ysi-v 2. Target substrate: l610 x w560 (maximum) ~ l50 x w50 (minimum) & supports l750mm super long substrate (optional) 3. Resolution: visible light (red/green/blue) & infrared (infra-
Used SMT Equipment | Soldering - Reflow
Newly-designed low-height lid is adopted on Heller 1936 MK7, simplifying the operation and maintenance, reducing the temperature of the surface, and saving energy. The vertical curing oven developed by Heller is available to replace the traditional
Industry News | 2021-04-14 10:42:33.0
The 2021 Service Excellence Award for Soldering Equipment was given to Heller Industries. Circuits Assembly recognizes companies that receive the highest customer service ratings, as judged by their own customers.
Industry News | 2015-11-12 22:03:28.0
Heller Industries is thrilled to announce that we've partnered with the #1 Northern California Sales Representative Group - Lean-Stream!
Parts & Supplies | Pick and Place/Feeders
The definition of SMT SMT is the surface assembly technology,surface mount technology(surface mount technology)(Surface Mounted Technology abbreviation),is currently the most popular electronic assembly industry,a technology and technology. What a
Technical Library | 2015-07-27 16:58:29.0
When it comes to the application of conformal coating, curing the coating plays a key role in the circuit assembly and selective conformal coating process. Curing conformal coating occurs after the coating spray/dispense process is complete. The coating is considered “cured” when the conformal coating on the circuit assembly is sufficiently tack-free to be handled. Curing can sometimes be accomplished at room temperature but takes a considerable amount of time to dry. Accelerated conformal coating curing decreases this drying period, the cure process reaches either the tack-free or a fully dried state but not quite having fully cured properties. Accelerated curing techniques include one or a combination of heat, moisture, UV light, and chemical reaction curing. This article focuses primarily on thermal or heat curing.
Technical Library | 2015-08-18 14:02:37.0
What is UV Curing? “Ultraviolet (UV) light is an electromagnetic radiation with a wavelength from 400 nm to 100 nm, shorter than that of visible light but longer than X-rays.” (Source: Wikipedia). Ultraviolet or UV curing is used to create a photochemical reaction using high intensity Ultraviolet (UV) energy or “light” to quickly dry inks, adhesives or conformal coatings. Most materials cure with a UV wavelength around 350 ~ 400nm although some materials require UVC energy near 255nm. There are many advantages to using UV curing over other traditional methods of curing. Not only will it increase production speed, it assists in creating a better bond, and improves scratch and solvent resistance. When compared to other methods of curing, UV curing generates a more reliable cured product at a much higher rate of production in a considerably shorter period of time.
General curing, die attach curing, underfill curing, film & tape bonding, wafer laminating.
This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Tue Jun 04 00:00:00 EDT 2019 - Tue Jun 04 00:00:00 EDT 2019 | Philadelphia, Pennsylvania USA
Quality Adhesive Technologies from LOCTITE - Free Workshop
Events Calendar | Mon Apr 12 00:00:00 EDT 2021 - Mon Apr 12 00:00:00 EDT 2021 | ,
Europe Chapter Webinar: Tombstoning Components during Reflow Soldering - Causes & Cures
Career Center | , Texas USA | Engineering,Maintenance,Production,Technical Support
Rehm USA LLC sells and services thermal processing equipment for the electronics manufacturing industry. As part of Rehm Anlagenbau GmbH, Rehm USA extends the Rehm product line to the North America market and provides the highest quality service. Jo
Career Center | Cavite, Philippines | Engineering,Technical Support
I had 15 years Handling SMT Equipment.
Career Center | Singapore, Singapore | Engineering,Production
I am a result/goal-oriented engineer with 20 years of experience in Surface Mount Technology (SMT) environment, of which 7 years were heavily involved in field service and field application for Automated Optical Inspection (AOI) machines. I partici
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2019/08/pressurecureoven.pdf
Pressure Cure Oven (PCO) Pressure Cure Oven (PCO) System Overview Pressure Cure Oven (PCO) or Autoclave is used to minimize voiding and increase adhesion strength for bonding processes typically used in die attach and underfill applications
Lewis & Clark | http://www.lewis-clark.com/product-tag/cure/
cure Archives - Lewis and Clark Skip to content My Cart: 0 View Cart Checkout No products in the cart. Subtotal: View Cart Checkout Lewis and Clark We Discover Equipment Opportunities NH: 603-594-4229 FL: 813-888-7436 sales@lewis
