JMC Products is a leading manufacturer of thermal solutions with facilities around the world. Our product line features AC and DC fans, heatsinks, special thermal products, and cooling solutions for all AMD and Intel processors.
Industry Directory | Manufacturer
TennMax Inc is EMI and Thermal Management Specialist. We offer total solutions for any EMI and thermal applicatons.
New Equipment | Board Handling - Conveyors
Model No: KSUN 460F Cooling Conveyor Power supply: 100-230V AC (customized), single phase Power load: MAX 100V/A Transport direction: Left to right/right to left(optional) Transport height: 900±20mm (or customized) PCB thickness: Min 0.6mm PC
A500, A600, A800 - 5, 6 or 8 top/bottom cooling zones. Heating System: Up to eight groups of top and bottom forced hot air convection heating zones. Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air co
Electronics Forum | Fri Feb 03 15:40:39 EST 2006 | chrisgriffin
Hello, I am looking for replacement cooling fans for the BTU oven cooling zone. The oven is a P98 model. BTU is back ordered, and I can't wait. Does anyone have any extras to sell, or know of an alternate source? Any help is greatly appreciated.
Used SMT Equipment | Soldering - Reflow
10 Heat Zones Voltage: 220V Max PCB size: 18" Feed Direction: L-R Additional Options: EHC, Fan Speed control, Cool Pipe
Used SMT Equipment | Soldering - Reflow
10 Heat Zones Voltage: 380V Max PCB size: 18" Feed Direction: L-R Additional Options: EHC, Dual Lane (MFFM), Fan Speed Control, CBS, Reactor, Cool Pipe
Industry News | 2018-02-02 18:44:38.0
The IWLPC Technical Committee is pleased to announce the Best of Conference, Best Presentation & Best Papers in WLP, 3D, Advanced Manufacturing and Test tracks as chosen by the technical committee and attendees based on technical merit, relevance, originality, knowledge of subject, quality of material, and quality of presentation.
Industry News | 2015-09-14 17:15:45.0
ISVI Corp. has announced the official release of its all-new IC-M29S-CL, a monochrome 29 Megapixel CCD camera with a base configuration Camera Link interface achieving 4.45fps.
Parts & Supplies | Assembly Accessories
Panasonic N610029094AB CM402 CM602 Vacuum pump cooling and cooling fan
Parts & Supplies | Assembly Accessories
AXPC fan Assembly 949839603998 0.8M Linking Conveyor, Single Lane, for Cooling, with 6 Fan on Top MMLC-2103.8F 0.8m Linking Conveyor, without Fan MMLC-2103.8 1KURA FAN （for Samsung Reflow SRF70i82 ） U6250MKG1 1M Conveyor With
Technical Library | 1999-05-06 11:42:16.0
The most reliable and well-designed electronic device can malfunction or fail if it overheats. Considering thermal issues early in the design process results in a thermally conscious system layout and minimizes costs through the use of passive cooling and off-the-shelf components. When thermal issues are left until completion of the design, the only remaining solution may be a costly custom heat sink that requires all the space available. Incorporating a heat sink or a fan into a product after it is fully developed can be expensive, and still may not provide sufficient cooling of the device.
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
A500, A600, A800 - 5, 6 or 8 top/bottom cooling zones. Heating System: Up to eight groups of top and bottom forced hot air convection heating zones. Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air co
A demo of the Shuttle Star SV560 A BGA Rework Station.
Heller Industries Inc. | https://hellerindustries.com/parts/8132/
8132 - Cooling Fan, 400CFM, for PN 7630 Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New
KingFei SMT Tech | https://www.smtspare-parts.com/sale-40327585-n610029094ab-panasonic-cm402-cm602-vacuum-pump-cooling-fan-w-connector.html
N610029094AB Panasonic CM402 CM602 Vacuum Pump Cooling Fan W Connector Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
