Industry Directory | Manufacturer
The international full service manufacturer of systems, detergents, equipment and process design for the cleaning in electronics production.
The best stability under all operating conditions is achieved by electrical rotary equipment (motors and generators) and static electrical equipment (transformers and sensors) if all the air trapped inside the wire windings is replaced with insulatio
In many cases the casting process is carried out under a vacuum to prevent air pockets. Trapped air bubbles reduce heat dissipation, since air is a good heat insulator, or they give rise to disruptive electrical charges in high-voltage applications,
Electronics Forum | Thu Jul 10 09:41:37 EDT 2014 | bobpan
Can anyone recommend a top notch filter to remove oil from the compressed air lines. The filter will be placed before the machine. We have traps that catch .01 micron oil in the airline but it is still getting through to the machine. Thanks, Bob
Electronics Forum | Thu Jul 10 11:24:27 EDT 2014 | spoiltforchoice
Use an oil free compressor ;). My UK based answer would be: We treat our air at point of use with a desiccant air dryer by Walker Filtration (this unit looks remarkably similar to units by Mark, Beko and others (especially the controller) this dryer
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Industry News | 2012-02-15 19:18:44.0
GPD Global announces that its PCD4H Dispense Pump yields excellent results with phosphor and non-phosphor-filled LED encapsulation as viewed on the color chart by tightly grouped results.
Industry News | 2018-10-18 08:32:52.0
How to Prevent Solder Ball and Bridging Defects during the SMT Reflow Process
ATRON® SP 200 is a water-alkaline surfactant cleaner, specifically developed to remove baked-on fluxes from solder pallets and condensation traps. ATRON® SP 200 can be used for the removal of unsoldered solder pastes from SMT stencils. The cleaner ca
Rugged Material Feeding Unit for Highly Abrasive Dispensing Media With High Viscosity. Loading of Material From 20-Litre Drums With the Patented Scheugenpflug Barrel Follower Plate. The barrel (hobbock, pail) is positioned on the ergonomic hobbock d
| http://etasmt.com:9060/te_news_bulletin/2021-08-31/23577.chtml
are accelerated by stronger buoyancy forces making them more likely to escape The pressure inside trap gas per the Young- Laplace Equation Pressure trapped inside a gas bubble changes according to Young-Laplace Equation Pbubble = Pambient + 2g / r (where “g
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/bga-pad-size_topic2607_post10645.html
. This was and is expensive. The via-in-pad must be plugged, plated over and planarized flat. Any dimple will trap air and cause Ball Voiding