Industry Directory | Manufacturer
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
Industry Directory | Consultant / Service Provider / Manufacturer / Standards Setting / Certification / Training Provider
BEST is a certified master IPC Training and Solder Certification center. We provide comprehensive courses for both Instructors and Operators including IPC-A-610, IPC J-STD-001, IPC-A-600, IPC/WHMA-A-620, and IPC 7711/7721 standard
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with a servo motor equ
Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified Jetting Pump and Ti
Electronics Forum | Fri Jul 25 12:54:53 EDT 2008 | schorschimi
I am interested in pwb manual assembly time standards, including hardware mounting, component preparation, hand soldering and additional tasks. Thanks for your help
Electronics Forum | Sat Jul 26 07:22:02 EDT 2008 | bobwillis
Some of my old times from GEC are online at http://www.bobwillis.co.uk/downloads/time.rtf See you at SMTA Int. Bob Willis ASKbobwillis.com
Used SMT Equipment | Pick and Place/Feeders
Vintage: 2005 Version 2.9.15c Hydra Total assembly time: 17 days, 18 hours, 16 minutes, 40 seconds
Used SMT Equipment | AOI / Automated Optical Inspection
Capture on the fly technology 3D Fusion Lighting (RGB+White LED's) 5 megapixel color imaging 2 top-down and 4 side angle cameras Quick set-up High speed, high defect coverage Low false failure rate Programmable conveyor for boards up to 20 x 2
Industry News | 2021-04-14 10:42:33.0
The 2021 Service Excellence Award for Soldering Equipment was given to Heller Industries. Circuits Assembly recognizes companies that receive the highest customer service ratings, as judged by their own customers.
Industry News | 2012-05-11 20:35:45.0
Heller Industries has been awarded a 2012 SMT VISION Award in the category of Soldering Reflow for its 1936 Mark 5 Reflow Oven. The award was presented on April 25, 2012 at the Nepcon China Exhibition.
...jpg)
Parts & Supplies | SMT Equipment
Universal Spindle assembly (49498805) Pls kindly contact with us at any time, if you are insterest more info about products. Website : www.ksunsmt.com Email: jenny@ksunsmt.com Skype:jenny@ksunsmt.com MP: 0086-15629932323 What's app: 156299323
Parts & Supplies | Pick and Place/Feeders
Yamaha CL 8X4MM FEEDER SMT assembly if need more info about the products , pls don’t hesitate to contact with us at any time.More info pls visit our website:www.ksunsmt.com. Email: alice@ksunsmt.com Skype: alice@ksunsmt.com Whats app: +8
Technical Library | 2019-07-10 23:36:14.0
Pockets of gas, or voids, trapped in the solder interface between discrete power management devices and circuit assemblies are, unfortunately, excellent insulators, or barriers to thermal conductivity. This resistance to heat flow reduces the electrical efficiency of these devices, reducing battery life and expected functional life time of electronic assemblies. There is also a corresponding increase in current density (as the area for current conduction is reduced) that generates additional heat, further leading to performance degradation.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with a servo motor equ
Training Courses | | | PCB Design Courses
The PCB design courses teach students the process, techniques and tools needed to design layout of printed circuit boards.
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Wed May 04 00:00:00 EDT 2022 - Wed May 04 00:00:00 EDT 2022 | ,
Virtual Course: Cost Modeling Your Assembly Line or Factory to Reduce Costs & Improve Profitability
Events Calendar | Mon May 10 00:00:00 EDT 2021 - Mon May 10 00:00:00 EDT 2021 | ,
Europe Chapter Webinar: Manual Cleaning of Printed Board Assemblies – Step by Step Guide
Career Center | Clinton, Connecticut USA | Production
Assembler position available for contract manufacturer of printed circuit board assemblies. Includes soldering and mechanical assembly. Full time position with good benefits. Higher pay for those applicants that have or can display soldering skills.
Career Center | Clinton, Connecticut USA | Production
Assembler position available for contract manufacturer of printed circuit board assemblies. Includes soldering and mechanical assembly. Full time position with good benefits. Higher pay for those applicants that have or can display soldering skills.
Career Center | Gainesville, Georgia USA | Production,Quality Control
SKILLS/ATTRIBUTES: Strong mechanical background in building computers and systems. Experienced in soldering, assembly, and quality control techniques. ISO 9001:2000 production department. Experienced with computer, cable, mechanical and electroni
Career Center | Gainesville, Georgia USA | Production,Quality Control
�Strong mechanical background in building computers and systems. �Experienced in soldering, assembly, and quality control techniques. �Familiar with ISO 9001:2000 certification standards. �Experienced with computer, cable, mechanical and electronic a
| https://www.feedersupplier.com/sale-13240919-ksmart-solutions-real-time-optimization-smt-spi-machine.html
KSMART Solutions Real Time Optimization SMT SPI Machine Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/lincense-buying-and-licensetime_topic1290_post5068.html
Lincense: Buying and License-Time - PCB Libraries Forum Forum Home > PCB Footprint Expert > Questions & Answers New Posts FAQ Search Events Register Login Lincense: Buying and License-Time
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
18220 Butterfield Blvd
Morgan Hill, CA USA
Phone: 5102268155
