Industry Directory | Manufacturer
Design and Manufacture Desiccant Dry Cabinets for low humidity storage and baking of moisture sensitive components, PCBs, electronic materials, lab samples, digital media and medical devices.
Industry Directory | Consultant / Service Provider / Manufacturer / Other
APS specializes in fast turnaround because we understand that our customers cannot sustain downtime on assembly lines. We provide Programming,Tape and Reel,DryPacking and Baking of IC's
The MSL baking process at OX3 Corporation, (�MSL� stands for Moisture Sensitivity Level), is in accordance with IPC and JEDEC Standard "J-STD-033A," the joint industry standard for semiconductor handling, packing, shipping and the use of moisture/ref
New Equipment | Board Handling - Storage
The Dr.Storage T40W are plug and play, fully auto dry cabinets which can bake at a stable 40℃ and maintain a consistent The T40W Baking Cabinets Series has a double wall design to ensure it maintains a stable According to J-STD-033B, using a T40W
Electronics Forum | Fri Aug 16 11:13:17 EDT 2002 | kenbliss
I have a question for everyone about component baking. In my view this is rework. The component was manufactured and shipped correctly and should not need baking in order to use it. Some how in storing the component in a stockroom atmosphere (I as
Electronics Forum | Sun Mar 20 14:47:29 EDT 2011 | floydf
We are going to be placing BGAs for the first time, and I have some questions. Is it recommended top bake all of the boards and all of the BGAs before production? I have had good luck baking boards that didn't wave solder well. It usually turns out
Used SMT Equipment | SMT Equipment
Baking SMT on a cheap kitchen toaster oven is not difficult. You just need some patience and exploration good will. In this page you will read the manual procedure to bake SMD boards into a regular kitchen toaster oven appliance. Follows information
Used SMT Equipment | Soldering - Reflow
Despatch TDF2-52-1E Bake Oven Brand: DespatchModel: TFD2-52-1ESerial number: 194309Max Operating Temperature: 343C (650F)F.A. DUCT 7.00" DIAEXH. DUCT: 2.50" x 13.5"F.A. Damper Blade Cut to: 1.38" DIA Holes 2XEXH. Damper Blade Cut to: 11.25LGMinimum p
Industry News | 2018-10-18 10:23:07.0
Typical RoHS Issues in PCB Assembly
Industry News | 2018-12-08 03:29:29.0
SMT Dictionary – Surface Mount Technology Acronym and Abbreviation
Technical Library | 2018-09-21 10:12:53.0
Moisture accumulates during storage and industry practice recommends specific levels of baking to avoid delamination. This paper will discuss the use of capacitance measurements to follow the absorption and desorption behaviour of moisture. The PCB design used in this work, focused on the issue of baking out moisture trapped between copper planes. The PCB was designed with different densities of plated through holes and drilled holes in external copper planes, with capacitance sensors located on the inner layers. For trapped volumes between copper planes, the distance between holes proved to be critical in affecting the desorption rate. For fully saturated PCBs, the desorption time at elevated temperatures was observed to be in the order of hundreds of hours. Finite difference diffusion modelling was carried out for moisture desorption behaviour for plated through holes and drilled holes in copper planes. A meshed copper plane was also modelled evaluating its effectiveness for assisting moisture removal and decreasing bake times. Results also showed, that in certain circumstances, regions of the PCB under copper planes initially increase in moisture during baking.
Technical Library | 2022-09-12 14:07:47.0
Unique component handling issues can arise when an assembly factory uses highly-moisture sensitive surface mount devices (SMDs). This work describes how the distribution of moisture within the molded plastic body of a SMD is an important variable for survivability. JEDEC/IPC [1] moisture level rated packages classified as Levels 4-5a are shown to require additional handling constraints beyond the typical out-of-bag exposure time tracking. Nitrogen or desiccated cabinet containment is shown as a safe and effective means for long-term storage provided the effects of prior out-of-bag exposure conditions are taken into account. Moisture diffusion analyses coupled with experimental verification studies show that time in storage is as important a variable as floor-life exposure for highly-moisture sensitive devices. Improvements in floor-life survivability can be obtained by a handling procedure that includes cyclic storage in low humidity containment. SMDs that have exceeded their floor-life limits are analyzed for proper baking schedules. Optimized baking schedules can be adopted depending on a knowledge of the exposure conditions and the moisture sensitivity level of the device.
http://www.pcb-separator.com/html/PRODUCTS/PCB%20separator/2015/0610/157.html http://www.pcb-separator.com/ PCB Separator supplier/PCB Separator factory/pcb cutting machine manufacturer/pcb depaneling tool/V-cut pcb separator/LED strip cutter
http://www.pcb-separator.com/html/PRODUCTS/PCB%20separator/2015/0607/137.html ?????????/V-cut depaneling/PCB Depanelers/??pcb????/PCB cutting machine/pcb depaneling machine/depanelizing pcb
Career Center | Theni, Tamilnadu India | Engineering
NPI Engineer: • Playing a role as NPI leader of the Telecom, Aerospace & Server Products to introduce and run to qualify the engineering build from customer. • Conducting Weekly NPI meeting with the CFT team to review the progress of the NPI schedu
Surface Mount Technology Association (SMTA) | https://www.smta.org/education/presentations/presentations.cfm
dynamic, influential and impactful. You'll learn the skills of influencing your team, leading people in turbulent times, and the keys to having lasting influence. About the Presenter: Stephanie Goetz is an award-winning journalist, executive speaker
winsouce.jpg)
.gif)
