Besides our standard line of UV-electronics such as UV-lamps, UV-monitors, UV-sensors, radiometers, photometers, spectrometer we develop and produce individual solutions to customer's requirements. We offer extensive services including calibration.
Industry Directory | Manufacturer
The Dale name has meant excellence in passive components for many decades. Vishay Dale products include a broad line of non-linear resistors, inductors, magnetics, connectors, crystal oscillators, and panel displays.
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with a servo motor equ
Main product: SMT Assembly Reflow Oven, SMT Hot Air Reflow Oven, Lead Free Reflow Oven, SMT Reflow Oven, SMT Mounting Machine, Elctronic Equipment, PCB Machine, reflow oven, SMT Assembly, SMT/SMD Equipment, PCB Printer, screen printing SMT assembly
Electronics Forum | Tue Sep 23 18:55:59 EDT 2008 | smt_guy
"Ionization of the air causes an increase in conductivity..." I have an Ionograph and everytime I open the test lid cover the Baseline Stabilization Resistivity Value s by 60M Ohm-cm. My question is: Is there something to worry about our facilities
Electronics Forum | Wed Feb 02 12:11:31 EST 2000 | Dave F
Casimir: Resistivity of Solvent Extract (ROSE) testers measure ionic contamination by washing boards with a DI water/IPA solution. (No-clean people: Stop and go on to something else.) The testers are process control instruments used to monitor a
Used SMT Equipment | In-Circuit Testers
Agilent 8753D-002-010-1D5 Network Analyzer, 30KHz to 6 GHz The HP 8753D network analyzer provides affordable excellence in RF network measurement for the lab and production testing. It has an integrated S-parameter test set for longer-lasting ca
Used SMT Equipment | In-Circuit Testers
Agilent-Keysight 8753D-002-010-1D5 Network Analyzer, 30KHz to 6 GHz The HP 8753D network analyzer provides affordable excellence in RF network measurement for the lab and production testing. It has an integrated S-parameter test set for longer-l
Industry News | 2016-02-27 22:11:00.0
GPD Global has advanced its auger pump technology with the introduction of the newly developed Precision Auger Pump. This pump was designed to offer a wide range of functionality in your process development by being compatible with a wide range of auger/cartridge assemblies.
Industry News | 2003-02-20 08:04:10.0
The Mini-Fix card-to-cable connector is designed to withstand hundreds of mating cycles with high contact security and mechanical stability.
Parts & Supplies | SMT Equipment
Samsung SM321 Grease AFE Grease - CA 70g SMT Spare Parts THK Grease 9FU145 Features: 1, Low Dust Optimum grease for clean environment. 2, Economy Maintenace and Long Time perfomance 3, Application Under high Temperature Condition 4, Excellent
Parts & Supplies | SMT Equipment
Samsung THK Grease 9FU145 SM321 Grease AFE Grease CA 70g Parameters: 1.Low Dust Optimum grease for clean environment. 2.Economy Maintenace and Long Time perfomance 3.Application Under high Temperature Condition 4.Excellent Chemical stability 5
Technical Library | 2017-03-09 17:37:05.0
This article focuses on the fabrication and characterization of stretchable interconnects for wearable electronics applications. Interconnects were screen-printed with a stretchable silver-polymer composite ink on 50-μm thick thermoplastic polyurethane. The initial sheet resistances of the manufactured interconnects were an average of 36.2 mΩ/◽, and half the manufactured samples withstood single strains of up to 74%. The strain proportionality of resistance is discussed, and a regression model is introduced. Cycling strain increased resistance. However, the resistances here were almost fully reversible, and this recovery was time-dependent. Normalized resistances to 10%, 15%, and 20% cyclic strains stabilized at 1.3, 1.4, and 1.7. We also tested the validity of our model for radio-frequency applications through characterization of a stretchable radio-frequency identification tag.
Technical Library | 2016-03-17 19:09:46.0
The rapid growth of electronic devices across the globe is driving manufacturers to enhance high-speed mass production techniques in the PCB assembly arena. As manufacturers drive to reduce costs while maximizing production by expanding facilities, updating automation equipment, or implementing lean six sigma techniques, the potential to build scrap product or rework printed circuit boards increases dramatically.Manufacturers have two general paths to reduce the costs of high-speed printed circuit board assembly production. The first path is to reduce cost by focusing on high quality printing and mounting. The other, increasingly popular option is to utilize low-cost materials. In either case, the baseline must provide a consistent high-speed solder paste printing method, which considers the fill, snap-off, and cleaning processes.Building on our expertise and testing, this paper will highlight the two trains of thought with specific focus on how low-cost materials affect print performance. It will also explore technologies, which can help provide stable, high-speed screen printing.
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with a servo motor equ
· What is the difference between SMT vacuum reflow soldering machine and ordinary reflow soldering machine? · What problems can be solved by smt vacuum reflow soldering machine? · What is the basic principle of vacuum reflow machine? · Ho
Training Courses | | | ESD Control Training Courses
Browse training and certification programs for electrostatic discharge (ESD) control in electronics assembly.
Career Center | Houston, Texas USA | Engineering,Management,Quality Control,Technical Support
Seasoned Process & Quality Engineer. Degreed Chemical Engineer. 20+ years in Electronics Semiconductor manufacturing. Proficient in Quality Statistical tools, Design of Experiments, FMEAs, APQP, PPAP, ISO 9000, ISO/TS 16949 etc.
Career Center | NEW DELHI, India | Technical Support
I am having almost 20 years of experience in the field of electronics repairs domestic & industrial, able to work on any circuit and PCB without any schematic or diagram. I have all the records and certifications with me and fully c
SMTnet Express, March 17, 2016, Subscribers: 24,116, Companies: 14,735, Users: 39,857 Enabling High-Speed Printing Using Low-Cost Materials: Process Stability is Paramount Michael L. Cieslinski, Brent A. Fischthal; Panasonic Factory Solutions