Industry Directory | Research Institute / Laboratory / School
The University of Bath is a public research university located in Bath, Somerset, United Kingdom. It received its royal charter in 1966, along with a number of other institutions following the Robbins Report.
Industry Directory | Manufacturer
SensoTech is the manufacturer of the advanced LiquiSonic® analytical technology that measures continuously in baths the concentration of cleaning agents and the contamination degree for an online bath monitoring.
New Equipment | Soldering Robots
ERSA POWERFLOW Wave Soldeing Machine Solder volume: 820 kg working width: 508 mm Weight: 2,200 bis 3,000 kg Dimension: 4,200 to 4,950x1,510x1,565 mm ERSA POWERFLOW Wave Soldeing Machine ERSA POWERFLOW Wave Soldeing Machine ERSA POWERFLOW Wa
The NexJet® 8 Jetting System with patented ReadiSet™ Jet Cartridge offers increased jet frequency combined with advanced consumable management - it's as easy as ReadiSet and Jet. ReadiSet Jet Cartridge reduces operator training time, cost-of-owner
Electronics Forum | Mon Mar 07 08:03:14 EST 2005 | jonathanpaul
Have any of you ever experienced minor eruptions in your solder bath while it is heating up? Our solder bath splashes solder while it's heating. Once the bath is molten, it no longer does. Can anyone suggest a cause?
Electronics Forum | Thu Jan 26 13:13:14 EST 2017 | dyoungquist
What type of solder are you using, Lead or Lead-Free? What is the melting point of it? What temperature are you setting your solder bath to? Possible solutions: 1) Give your solder bath a little more time to even out the temperature across the en
Used SMT Equipment | Soldering - Wave
400V 50/60 HZ Version ERSAsoft for: 4.050.000.000 2. Operating System Dell / Windows 7 Processor: Pentium(R) Dual Core E5800 @ 3.20GHz 3.19GHz Memory RAM: 4.00 GB (3.46 GB usable) 320bit Operating System Touch Screen – No Pen Touch, input is availabl
Used SMT Equipment | Soldering - Selective
Options: • Less than 100 hours of operation • Top side pre-heat • DC servo drives • Integral PC and machine mounted TFT monitor • Inerted Nitrogen system • Auto motorized wire solder feed & level detect • Solder bath coding – ide
Industry News | 2017-09-07 23:32:44.0
GPD Global will exhibit at the upcoming SMTA International 2017. At booth# 216, on display is an automated Conformal Coating Machine with excellent repeatability for under $40,000. SimpleCoat is a NEW low cost, inline, simple Conformal Coating System with full featured programming making the conformal coating processes quick and easy to set up.
Industry News | 2018-10-08 20:18:03.0
GPD Global will exhibit at the upcoming SMTA International 2018. At booth# 517, see our automated Conformal Coating Machine with excellent repeatability for under $40,000.
.jpg)
Parts & Supplies | SMT Equipment
00370409-01 Micro-Transceiver RJ45/AUI AT-210TS-05 00370500-10 Software Linie LINUX 503/10(503.06)&OS 00370691-01 BELT MEASURING STRIPE 00370710-01 BRASS BRUSHER 00370731-02 LIGHT BARRIER TRANSM. APPL. BAND 00370735-02 LOCKED BOX 00370750-04 SI
Parts & Supplies | SMT Equipment
02102342-01 BALL BERING AND FREE WHEEL KIT FOR 8MM FEEDER TURBO 02102349-01 UNIVERSAL ULTRASOUND CLEANING- BATH FOR PIECES OF THE APPLICATION HEAD AND DOSAGE NOZZLES KLEB 2 INCLUSICE CAGE AND COVER USEFUL ROOM:190x85x60 02102353-01 *SUBSTITUTE=0030
Technical Library | 2019-07-17 17:56:34.0
The increased demand for electronic devices in recent years has led to an extensive research in the field to meet the requirements of the industry. Electrolytic copper has been an important technology in the fabrication of PCBs and semiconductors. Aqueous sulfuric acid baths are explored for filling or building up with copper structures like blind micro vias (BMV), trenches, through holes (TH), and pillar bumps. As circuit miniaturization continues, developing a process that simultaneously fills vias and plates TH with various sizes and aspect ratios, while minimizing the surface copper thickness is critical. Filling BMV and plating TH at the same time, presents great difficulties for the PCB manufactures. The conventional copper plating processes that provide good via fill and leveling of the deposit tend to worsen the throwing power (TP) of the electroplating bath. TP is defined as the ratio of the deposit copper thickness in the center of the through hole to its thickness at the surface. In this paper an optimization of recently developed innovative, one step acid copper plating technology for filling vias with a minimal surface thickness and plating through holes is presented.
Technical Library | 2017-04-20 13:51:14.0
The one constant in electronics manufacturing is change. Moore's Law, which successfully predicted a rate of change at which transistor counts doubled on Integrated Circuits (ICs) at lower cost for decades, is ceding to be an appropriate prediction tool. Increasing technical and economic requirements, deriving from the semiconductor environment, are cascaded down to the printed circuit and in particular to the IC substrate manufacturers. This is both a challenge and an opportunity for IC Substrate manufacturers, when dealing with the demands of the packaging market. (...)This paper introduces two new electroless copper baths developed for IC substrates manufacturing based on Semi Additive Process (SAP) technology (hereafter referred to as E'less Copper IC) and HDI production (hereafter referred to as E'less Copper HDI) and optimized for high throw into BMVs. An introduction to reliable throwing power measurement methods based on scanning electron microscope (SEM) is given, followed by a compilation and discussion of key performance criteria for each application, namely throwing power, copper adhesion on the substrate, dry film adhesion and reliability.
http://www.gpd-global.com Tilt-and-Rotate configuration is available. Full featured programming makes conformal coating processes quick and easy. 3-axis Conformal Coating System for printed circuit boards that provides a reliable robotic platform f
Ultra-flexible, offline, multi-platform selective soldering system Designed to meet the needs of the small batch manufacturer who requires high levels of production flexibility. The Jade Pro offers the ability to regularly change solder alloys witho
Training Courses | ONLINE | ON DEMAND | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Thu Sep 24 00:00:00 EDT 2020 - Fri Sep 25 00:00:00 EDT 2020 | ,
PCB Cleaning Process Bath Life – When in Doubt, Dump it Out?
Career Center | , India | Engineering,Production,Quality Control,Research and Development,Sales/Marketing,Technical Support
I am working as lab chemist and also involved in troubleshooting and process control of various processes in pcb industry
Career Center | ORLANDO, Florida USA | Engineering,Maintenance,Production,Technical Support
Manufacturing tech/eng for a contract manufacture for 10+ years. Been working in the SMT industry for a total of 20yrs. Have done everything from operator to process work. Most familiar with Assembleon, MPM, DEK, BTU,Electrovert, SLIM-KIC, SUPER-MOLE
| https://www.eptac.com/ask/maximum-limits-of-solder-bath-contamination/
Maximum Limits of Solder Bath Contamination - EPTAC - Train. Work Smarter. Succeed Looking for solder training standards, manuals, kits, and more
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/proceedings_abstract.cfm?PROC_ID=5495
. The excellent Cu wire-bonding reliability was obtained in no corrosion at the Ni-P surface. The factors influencing corrosion of the electroless Ni-P surface were found to be additives in Pd plating bath, plating area of pad on the substrate, and liquid flow in the electroless Pd plating bath
