1.5 million components per hour Maximum Board Size: 20” x 21” (500mm x 525mm) Clearance: 2” (50mm) top and bottom Minimum Component Size: 0201; 01005 with high magnification option
Contact: Jacky.li@samtronik.net Categories Manual PCB Separator Album View larger image Brand SAMTRONIK Model SM-900 Shear Width 8-230MM Shear Speed 0-300mm/s adjustable
Electronics Forum | Wed May 15 10:09:56 EDT 2019 | dhanish
Can we bent a PCB using mechanical force ?Will the PCB come back to original condition or it will be bent forever after the mechanical force is removed from the pcb?
Electronics Forum | Mon Sep 23 02:10:18 EDT 2019 | sssamw
It would kill the component on the opposite side, be careful to bent a PCB especially with component installed. Be sure the bent warpage is no higher than the component permitted or not high to cause de-lamination.
Used SMT Equipment | AOI / Automated Optical Inspection
YesTech YTV-F1 Automated PCB Inspection System >Multi-function all purpose In-Line system • (2) Top-down Cameras; Incl. (1) High Magnification • (4) side viewing cameras • LED top light, bi-color multiangle LED lighting •
Used SMT Equipment | AOI / Automated Optical Inspection
YesTech YTV-F1 Automated PCB Inspection System >Multi-function all purpose In-Line system • (2) Top-down Cameras; Incl. (1) High Magnification • (4) side viewing cameras • LED top light, bi-color multiangle LED lighting •
Industry News | 2008-02-28 21:48:17.0
OXFORD, CT � February 2008 � MIRTEC a leading global supplier of AOI systems to the electronics manufacturing industry, announces that it will introduce its MV series of AOI systems in booth 1857 at the upcoming APEX exhibition & conference scheduled to take place April 1-3, 2008 in Las Vegas.
Industry News | 2009-03-16 18:07:28.0
OXFORD, CT � March 2009 � MIRTEC, �The Global Leader in Inspection Technology,� announces that it will introduce the latest advancements to its MV Series of AOI systems as well as unveil the company's first In-Line SPI System, the MIRTEC MS-11, in booth 147 at the upcoming APEX exhibition & conference scheduled to take place March 31- April 2, 2009 in Las Vegas.
Technical Library | 2009-12-09 19:47:15.0
For the mobile market some PCB assemblies have been converted to flex circuit assemblies, in part because flex circuit assembly can be twisted or bent per the application needs. Flex circuits offer the same advantages as conventional printed circuit boards: quality, reliability, and high density.
Technical Library | 2023-06-02 14:13:02.0
This work examines the use of dual-material fused filament fabrication for 3D printing electronic componentsand circuits with conductive thermoplastic filaments. The resistivity of traces printed fromconductive thermoplastic filaments made with carbon-black, graphene, and copper as conductive fillerswas found to be 12, 0.78, and 0.014 ohm cm, respectively, enabling the creation of resistors with valuesspanning 3 orders of magnitude. The carbon black and graphene filaments were brittle and fracturedeasily, but the copper-based filament could be bent at least 500 times with little change in its resistance.Impedance measurements made on the thermoplastic filaments demonstrate that the copper-based filamenthad an impedance similar to a copper PCB trace at frequencies greater than 1 MHz. Dual material3D printing was used to fabricate a variety of inductors and capacitors with properties that could bepredictably tuned by modifying either the geometry of the components, or the materials used to fabricatethe components. These resistors, capacitors, and inductors were combined to create a fully 3Dprinted high-pass filter with properties comparable to its conventional counterparts. The relatively lowimpedance of the copper-based filament enabled its use for 3D printing of a receiver coil for wirelesspower transfer. We also demonstrate the ability to embed and connect surface mounted components in3D printed objects with a low-cost ($1000 in parts), open source dual-material 3D printer. This work thusdemonstrates the potential for FFF 3D printing to create complex, three-dimensional circuits composedof either embedded or fully-printed electronic components.
This is a brief demonstration showing the 2014 YESTech FX operating. This machine is available at the Capital Equipment Exchange. www.ce-exchange.com
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
