New Equipment | Wave Soldering
High temperature, lead-free Solder Fountain with blow-thru air nozzle, used for removal and replacement of through-hole components, connectors, etc. mounted on PC boards. Microprocessor based digital controller that regulates solder temperature
New Equipment | Education/Training
Bob Willis has an extensive range of training videos available online. The complete video collection is available to view online for a fixed fee, based on a six month period. After purchase you are provided with links to each of the online videos for
Electronics Forum | Thu Apr 05 12:45:45 EDT 2001 | Claude_Couture
On mixed technology PCBs, we find numerous blow holes on the solder joints of radial parts (electrolytics, LEDs, etc). The solution that works so far is to cut the leads very long in the radial inserter so that the part is kinda loose and the air in
Electronics Forum | Thu Apr 05 13:54:18 EDT 2001 | CAL
Do the parts sit directly on the PCB? Typical 2.0 mm Max is desired for the component to be off the PCB. Are stand-offs an option? The long lead wiggles as it passes through the wave and thus agitating the air out.Does your wave a "dancer" option?
Used SMT Equipment | AOI / Automated Optical Inspection
(2) Orbotech Automated Optical Inspections Machines For Sale Machine were just taken out of Military OEM facility in good working condition Both machines are being sold together at discounted price See attached pictures and information below
Used SMT Equipment | AOI / Automated Optical Inspection
Description: Orbotech VT 9300 Vintage : SEP 2004 *With Calibration Card *Boards Inspected: Post-solder SMT, through-hole and mixed technologies *Number of CCD Cameras: 13 Cameras *Fault Coverage: Component placement accuracy in X, Y and Q,
Industry News | 2018-10-18 09:20:09.0
Product defects caused by the flux in the wave soldering process
Technical Library | 2023-11-14 19:24:08.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations.
Technical Library | 2021-09-29 13:35:21.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations. Selective soldering using dedicated plates with nozzles on the solder area is the preferred way to make these connections. All joints can be soldered in one dip resulting in short cycle times. Additional soldering on a small select nozzle can make the system even more flexible. The soldering can only be successful when there is enough thermal heat in the assembly before the solder touches the board. A forced convection preheat is a must for many applications to bring enough heat into the metal and board materials. The challenge in a dip soldering process is to get a sufficient hole fill without bridging and minimize the number of solder balls. A new cover was designed to improve the nitrogen environment. Reducing oxygen levels benefits the wetting, but increases the risk for solder balling. Previous investigations showed that solder balling can be minimized by selecting proper materials for solder resist and flux.
The following video guides the user through a typical data collection process. These steps may vary depending on the process your company uses. Categories: WaveRIDER, WaveRIDER SPC (v5.2x)
Hot Nitrogen For Wave Soldering SMTnet Express July 5, 2012, Subscribers: 25307, Members: Companies: 8910, Users: 33309 Hot Nitrogen For Wave Soldering First published in the 2012 IPC APEX EXPO technical conference proceedings. by: Laurent
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/making-mounting-holes-in-footprint_topic1411.html
Making Mounting Holes in Footprint - PCB Libraries Forum Forum Home > PCB Footprint Expert > Questions & Answers New Posts FAQ Search Events Register Login Making Mounting Holes in Footprint
| https://www.feedersupplier.com/sale-17119745-hanwha-samsung-cp45-neo-hp14-000206-vq110-5l0-valve-blow.html
Hanwha Samsung Cp45 Neo Hp14-000206 Vq110-5l0 Valve Blow Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
