Industry Directory | Manufacturer
A manufacturer of desoldering braid (wick) with an emphasis on continuing advancement in soldering/desoldering technology, visual and x-ray inspection systems, fume extraction, and solder paste inspection systems.
Applied Ceramics is a fabricator of custom-made ceramics, quartz, silicon and sapphire spare parts designed for the semiconductor industry.
New Equipment | Solder Materials
OAJ Cored Wire features a halide-activated system that has been neutralized with an amine. The aminehydrohalide provides a high activation level that produces excellent tarnish or oxide removal, and maximum capillary action, leading to faster wetting
New Equipment | Rework & Repair Equipment
Desoldering braid (wick) is copper braid used in the rework and repair of printed circuit boards, computers, cell phones, or other electronics. Electronic components are often mounted on a circuit board and careful desoldering of components results i
Electronics Forum | Mon May 09 18:14:54 EDT 2016 | davef
I asked Randi Gates, Electrolube Marketing to join us to help with the conversation. Taking a step back from the Electrolube question, I could envision a 10 minute soak in DI water stripping the gold from a an ENIG board, you know, depending on the
Electronics Forum | Mon Oct 23 14:05:08 EDT 2000 | Aokilab
Hi Soza: As Dave F mentioned, there are lot of factors involving the formation of residue, after cleaning. Factors, (such as: solvent's cleaning power, presence of metal oxides, type of soldering flux, etc...). One thing pretty sure, IPC is usually
Used SMT Equipment | Soldering - Wave
this type can be added with nitrogen protection system 1 Flux spraying system 1.1 Spray fluxer can sense the board size automatically, and the spraying area can be adjusted according to the width of PCB. 1.2 Spray fluxer can sense the conveyor
Used SMT Equipment | Drying Equipment
BRAND : SUPER DRY -02 SERIES MODEL : SD-3032-02 DESCRIPTIONS : "02 series are equipped with 1 patented dry unit to constantly main
Industry News | 2018-10-18 09:25:57.0
about wave soldering machine tin pot
Industry News | 2008-10-26 00:28:46.0
ROSEMONT, IL � Industry-leading associations IPC and SMTA jointly announce that Dave Adams (Session Chair) of Rockwell Collins, Lee Flasche of Delphi Electronics Group, Dr. Ning-Chen Lee of Indium Corporation, Steve Hugh of Philips Medical, and Dr. Ken Dishart formerly of DuPont will present in Session 4 on Lead-Free Cleaning. The symposium, jointly sponsored by IPC and SMTA, will be held at Crowne Plaza Chicago O'Hare in Rosemont, IL on October 28-29, 2008
Technical Library | 2007-07-19 15:15:11.0
ROSA is a surface restoration technique that removes hard to reduce species like metal oxides or sulfides. At the time of its development, the focus was on solderability and compliance to environmental regulations. Industry trends and regulatory changes as a result of the Montreal Protocol were the driver for much of the concern over environmental compliance. The result was an increase in the development of no-clean and water soluble fluxes and the removal of halogenated cleaning chemistries.
Technical Library | 2019-07-02 23:02:05.0
The introduction of lead-free solders resulted in a selection of different chemistries for solder pastes. The higher melting points of lead-free alloys required thermal heat resistant rosin systems and activators that are active at elevated temperatures. As a result, more frequent maintenance of the filtration systems is required and machine downtime is increased.Last year a different method of cleaning reflow ovens was introduced. Instead of cooling down the process gasses to condensate the residues, a catalyst was used to maintain the clean oven. Catalytic thermal oxidation of residues in the nitrogen atmosphere resulted in cleaner heating zones. The residues were transformed into carbon dioxide. This remaining small amount of char was collected in the catalyst. In air ovens the catalyst was not seen as a beneficial option because the air extracted out of the oven was immediately exhausted into the environment. When a catalyst is used in an air environment there is not only the carbon dioxide residues, but also water. When a catalyst is used in an air reflow oven the question is where the water is going to. Will it condensate in the process part of the oven or is the gas temperature high enough to keep it out of the process area? A major benefit of using a catalyst to clean the air before it is exhausted into the environment is that the air pollution is reduced dramatically. This will make environmental engineers happy and result in less pollution of our nature. Apart from this, the exhaust tubes remain clean which reduces the maintenance of air ovens.This paper will give more detailed information of catalyst systems during development and performance in production lines.
The Centurion™ is a forced-convection SMT reflow system with tight, closed-loop process control, built for today’s high-throughput PCB assembly environments. With the best heat transfer in the industry, the Centurion is able to run any profile at the
HR-SD100 is an endeavor in reverting and recycling the oxides which occur during working of a Wave Soldering Machine in order to reduce production cost, create a greener environment and assist the quality process. Use special stirring system to melt
Career Center | Houston, Texas USA | Engineering,Management,Quality Control,Technical Support
Seasoned Process & Quality Engineer. Degreed Chemical Engineer. 20+ years in Electronics Semiconductor manufacturing. Proficient in Quality Statistical tools, Design of Experiments, FMEAs, APQP, PPAP, ISO 9000, ISO/TS 16949 etc.
Career Center | NORTHRIDGE, California USA | Engineering
EDUCATION BS Electronics and Communication Engineering Gujarat University MS Electrical Engineering California State University, Northridge ACADAMIC PROJECT Fabrication and Characterization of Silicon Carbide (SiC) MESFE
SMTnet Express July 18, 2013, Subscribers: 26169, Members: Companies: 13430, Users: 34947 Effect of Surface Oxide on the Melting Behavior of Lead-Free Solder Nanowires and Nanorods by Fan Gao, Karunaharan Rajathurai, Qingzhou Cui, Guangwen Zhou
| https://www.eptac.com/soldertips/solder-pot-maintenance-and-dross-removal/
. As a quick note, solder dross does not build up too quickly in a static pot, so there is enough time to tin after cleaning off the oxides (dross
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/march/plasma-applications/wafer-level-packaging
. In either case, cleaning the product to remove contamination such a fluorine, oxides or metals significantly enhances the yield, reliability and performance of the integrated circuit
