Industry Directory | Manufacturer
The UK's largest producer of ultra pure solder alloys for the electronics assembly and HASL industry across Europe.
Industry Directory | Manufacturer
AIM is a leading global manufacturer of solder assembly materials for the electronics industry.
New Equipment | Solder Materials
SAC305 is a lead-free alloy that contains 96.5 % tin, 3% silver, and 0.5% copper. This alloy falls under the JEIDA recommendation for lead-free soldering. When used in wave soldering, AIM’s SAC305 bar solder offers far superior fluidity as compared t
New Equipment | Solder Materials
FCT Solder has positioned itself as a leader in lead-free solder products. As a licensee of Nihon Superior’s patented technology, we manufacture and sell the leading lead-free alloy, SN100C. FCT Solder is the original licensee of Nihon Superior’s tec
Electronics Forum | Tue Jun 27 08:38:03 EDT 2006 | cuculi54986@yahoo.com
I tried some SN100C from AIM... On only one array. It flowed well on the chips but did not like the finish on the SOT23's on the board. I did not have enough arrays to mess around, so we switched it over to SAC305 and had no issues. I'm guessing w
Electronics Forum | Thu Jan 19 23:29:29 EST 2006 | theSaint
I've seen many comments in many threads about the positive attributes of SN100C (apparently mostly by salesmen). However, I have a concern for the higher temps that will be encountered when using SN100C (or Sn/Cu) vs. SAC305 (vs. 63/37), specifica
Industry News | 2018-04-09 19:51:33.0
SMTA Europe announces Session 2 Technical Program on Reliability of Soldered Alloys at the “Electronics in Harsh Environments Conference” to be held in Amsterdam, Netherlands, on April 25th, 2018.
Industry News | 2010-09-14 17:20:46.0
Nihon Superior Co. Ltd., a supplier of advanced soldering materials to the global market, has released a video demonstrating the results of an evaluation comparing the wettability and spreadability of SN100C and SAC305 solder alloys on stranded wire.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2008-03-31 21:35:36.0
While the situation varies from country to country, nearly one year after the EU RoHS Directive came into force implementation of lead-free solder is progressing steadily. For lead-free soldering to be considered successful it is not sufficient just to have dealt with the challenges of mass production. It is also necessary to establish that the soldered joints produced are at least as reliable as those made with Sn-37Pb alloy. In this context "reliability" means the length of time in service that the initial functionality of the joint can be maintained. In this paper we will discuss some of the issues involved in solder joint reliability through a comparison of the properties of two alloys that are widely used for lead-free wave soldering, SAC305 (Sn-3.0Ag-0.5Cu) and the Sn, Cu, Ni, Ge alloy SN100C.
SN100C P810 D4????????? ???????????? ??????????????????????????????????? ?????????????? ???http://www.nihonsuperior.co.jp/
Career Center | Rochester, New York USA | Engineering
I have done my undergraduate studies in Mechanical Engineering. I am pursuing my Master's Program in Electronics Packaging. I am currently working as a Research Assistant for RIT-CEMA (Center for Electronics Manufacturing and Assembly). My research
High Reliability Lead-free Solder SN100C(Sn-0.7Cu-0.05Ni+Ge) High Reliability Lead-free Solder SN100C(Sn-0.7Cu-0.05Ni+Ge) While the situation varies from country to country, nearly one year after the EU RoHS Directive came into force
| https://pcbasupplies.com/bar-solder/
Z to A By Review Price: Ascending Price: Descending Quick view Details PCBASupplies | sku: Sn63 Solder Bar Sn63 Solder Bar MSRP: Now: $329.85 Add to Cart Compare Quick view Details PCBASupplies | sku: NT100Ge Solder Bar SN100C Lead-Free Bar Solder
GPD Global | https://www.gpd-global.com/co_website/fluid-dispense-solderpaste-lead.php
. Leaded Solder Paste Dispensing Compare Solder Paste Dispensing for Leaded vs Lead-free Applications Solder Paste is used to make electrical connection between a PCB and component