Industry Directory | Manufacturer
Manufacture of feeders and other electronic component handling and transport systems
Industry Directory | Consultant / Service Provider / Manufacturer
WinTronics is a full service, ISO 9001:2000 certified, electronics and electro-mechanical contract manufacturer supporting customers in the commercial, industrial, automotive, Home Land Security, and military markets.
FKN Systek K5000 - Manual board feed PCB multiple panel singulation Singulate panels with up to 10 scorelines. Singulate panels with components up to 2.5" 3 models available: - Output tray - Straight output conveyor - Right angle output
Semi-Automatic SMT Stencil Printers - P300, P350, P400. Using precision guide rail and the import motor to drive the blade seat conversion, printing, and high accuracy. Printing scraper can rotate 45 degrees fixed up, easy printing stencil a
Electronics Forum | Wed Sep 28 20:54:04 EDT 2005 | Ken
I would run scale calibration first (for the suspect camera). That may be your only problem. However, if your having a rotation issue and all major angles are off (differently) then it is most likely R-axis accuracy. However, I would run AMF and
Electronics Forum | Wed Oct 26 16:47:17 EDT 2005 | jdengler
I have never heard of heating the board for separation. You may want to try some of the following. -Using a roller cutting type depaneler helps reduce the stress. -Using a combination of routing in areas with components near the edge and v-score th
Used SMT Equipment | Pick and Place/Feeders
Refurbished YAMAHA YV100XG SMT Pick and Place Machine Machine Type YV100XG Substrate size M type L460 * W335 (MAX) -L50 * W50 (MIN) L type L460 * W440 (MAX) -L50 * W50 (MIN) Mounting accuracy Absolute accuracy (μ + 3σ): ± 0
Used SMT Equipment | AOI / Automated Optical Inspection
OMRON AOI VT-S720-A MACHINE Hardware Configuration Image signal input unit Main unit Power supply Air Camera Illumination Image resolution Feed method Line height PCB carrier width adjustment Ambient operating temperature Ambient opera
Industry News | 2003-02-20 08:04:10.0
The Mini-Fix card-to-cable connector is designed to withstand hundreds of mating cycles with high contact security and mechanical stability.
Industry News | 2008-03-25 23:53:54.0
Comment from Brian D�Amico, President
Parts & Supplies | Component Packaging
8NH Theta Belt N510034190AA Rubber Panasonic NPM Angle Belt Panasonic Spare Parts 1, Part Name: 8NH Theta Belt 2, part Number: N510034190AA 3, material: Rubber 4, Color: Black
Parts & Supplies | Component Packaging
000-A JUKI E1332725010 COVER RUR PRINTED JUKI LOGO KE JUKI E1332725020 COVER RUR PRINTED JUKI LOGO KE JUKI E1333706A00 COVER TAPE HOLD BRACKET JUKI E1333721000 COVER RUL JUKI E133372100A COVER RUL (ST) JUKI E133372100B COVER RUL (ZN) JUKI E133
Technical Library | 2023-07-22 02:26:05.0
Patch offset; Uneven patches throughout the substrate (each substrate is offset in a different way); Only part of the substrate is offset; Only certain components are offset; The patch Angle is offset; Component absorption error; Laser identification (component identification) error; Nozzle loading and unloading error; Mark (BOC mark, IC mark) identification error; Image recognition error (KE-2060 only); Analysis of the main reasons for throwing material. More information about KINGSUN please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com
Technical Library | 2019-11-15 02:20:26.0
Material Aging Test-UV Weathering Test Chamber 1.What is UV aging? UV aging chambers use fluorescent ultraviolet lamp as light source to simulate UV radiation and condensation in natural sunlight, and to carry out accelerated weather resistance test in order to obtain the result of weather resistance of the material. UV aging detection is widely used in non-metallic materials, organic materials (such as coatings, paints, rubber, plastics and their products) under the change of sunlight, humidity, temperature, condensation and other climatic conditions to test the aging degree and situation of related products and materials. 2.Why we should do UV aging test? When the product is placed in the ambient environment, there will be different problems taken place, such as appearance changes, including cracking, speckle, powdering or color change, and even performance degradation,which may be due to the loss of components in the resin resulting in chemical bonds changes inside the molecular structure, this is mainly caused by sunlight, industrial exclusion of waste gas, bacteria and so on. The aging performance of the product directly affects the lifespan of the product, so aging test become significant,non-metallic materials, organic materials (such as paints, paints, rubber, plastics and their products) are subject to changes in sunlight, humidity, temperature, condensation and other climatic conditions to test the degree and condition of aging of related products and materials. The natural aging test is to put the plastic specimen under the sun exposure, and it is directly under the natural climate environment,to test the material performance under various factors such as light, heat energy, atmospheric humidity, oxygen and ozone, industrial pollution and the like, the most harsh climate condition should be selected,or near the actual application area of the material, the test site shall be open and flat, no obstacle to affect the test results,the specimen holder shall be facing the equator and at an angle of 45 ° from the ground. When the main performance index of the specimen has been reduced, the test s/b terminated when it achieve the minimum allowable use value . in most case,the test is terminated when the product primary performance index falls to 50% of the initial value. The natural aging process is a very slow process, and there is a great difference in different geographical conditions, which brings difficulties to evaluate the aging resistance of the product. It is an attempt to make an evaluation of the aging performance of the plastic in a shorter time,that is accelerated aging test. The accelerated aging test can be used to simulate the human light source of the fluorescent lamp, including the carbon arc lamp, the xenon arc lamp and the fluorescent ultraviolet lamp, and the artificial light sources can generate more light than the natural sunlight on the ground. When these artificial light sources are used, it is also common to use the combination of the condenser to simulate the rain drop, the dew and the like to conduct the aging test on the product.
The ZEVAm+ selective soldering machine brings patented soldering technology that excels at meeting the challenges of miniaturization. Tilting allows the ZEVAm+ to solder at any angle to guarantee proper soldering results for the ever decreasing pitch
ITW EAE, the Electronic Assembly Equipment division of ITW is introducing an innovative new twin-nozzle developed by the Vitronics Soltec team for the ZEVA Selective Soldering System. The 3D-Twin-Nozzle™ has two nozzle diameters combined in one
Career Center | Sta. Rosa, Philippines | Maintenance,Production,Technical Support
Complete knowledge in smt,aoi and reflow. 11 years working experienced in production and 5 years experienced in the field service job.
Career Center | Sta. Rosa, Manila Philippines | Technical Support
I am in the field of smt equipment for 15 years already and at present i am working as a Service Engineer for High Speed mounter machines . Our Company is solly Sales & Service providers of all pcb assembly and semiconductor equipment. I do inter
SMTnet Express, December 24, 2014, Subscribers: 23,651, Members: Companies: 14,149, Users: 37,444 Profiled Squeegee Blade: Rewrites the Rules for Angle of Attack Ricky Bennett, Rich Lieske - Lu-Con Technologies , Corey Beech - River
SMT Express, Volume 3, Issue No. 5 - from SMTnet.com Volume 3, Issue No. 5 Thursday, May 17, 2001 Featured Article Return to Front Page A Closer Look at Area Array Components by Gil Zweig , Glenbrook Technologies, Inc . Combining
Imagineering, Inc. | https://www.pcbnet.com/blog/pcb-board-design/
. Because of that, you shouldn’t immediately start designing the PCB directly. Instead, it would help if you drew up a schematic . Your schematic should include all the components you know you’ll require
Heller 公司 | http://hellerindustries.com.cn/00600-248.pdf
? Reflowing double-sided boards in a full convection oven is generally proscribed since it can cause components to be blown off the bottom
.gif)
.gif)
.png)
winsouce.jpg)