【Type】 XRA 【Power(W)】 5W、10W、20W、30W、50W 【maximum output voltage(kV)】 ,5,,6,7,10,20,25,30, Typical application: The ROHS tester Thickness gauge Capacitor charging, Nuclear instrumentation, Nondestructive detection, Portable X ray machine,
New Equipment | Test Equipment
The hand-held PHASCOPE® PMP10 is ideally suited for quality control in the electroplating and printed circuit board (PCB) industries. Because the instrument employs the phase-sensitive eddy current method (ISO 21 968), it allows the measurement of me
Electronics Forum | Wed Sep 03 16:59:13 EDT 2008 | glennster
At a former employer we required HASL thicknes to be a minimum of 0.75 micron (30 microinches), as measured at the thinnest point on any given pad. This would generally assure a minimum 1 year solderability shelf life. Usually when we saw a soldera
Electronics Forum | Tue Feb 01 12:00:01 EST 2000 | K. Ckak
Hi Folks, I am looking for some info. and possibly a source on measuring inprocess copper plating thickness for Flex PCB manufacturing facilities. I have tried XRF, E-Current method but the supplier told us that it wont work with Flex material - th
Used SMT Equipment | Screen Printers
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput dema
Used SMT Equipment | Screen Printers
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput dema
Industry News | 2018-10-18 08:59:34.0
PRINCIPLE OF SURFACE MOUNT PROCESS(SMT PROCESS)
Industry News | 2018-12-08 03:29:29.0
SMT Dictionary – Surface Mount Technology Acronym and Abbreviation
Parts & Supplies | Pick and Place/Feeders
KXFB02QQB01 BRACKET 0 KXFB0210A00 PIN 0 KXFB04W5A00 BRACKET 0 KXFX03EHA00 PRESSURE-SW ISE30-01-25-M-X114 N510066819AA JOINT KQ2N04-M5A KXF0DR2AA00 JOINT GWS6-8 N210022436AB COVER 0 N210035700AA HOLDER 0 KXFB04UJA00 GUIDE 0 KXFB0AQ7A00 STOPPE
Parts & Supplies | Pick and Place/Feeders
N510017368AA BOLT Hexagon socket head cap screw M4X45-10.9 A2J (Trivalent) N510004786AA POST ETKRFT-25-250-1 N610018132AA COVER 0 MTNP000804AA JOINT KQ2W08-U01A N510020431AB CASE Mount Position Teach Jig Case N510018857AA BOLT Hexagon head bolt
Technical Library | 2021-07-20 20:02:29.0
During the manufacturing of printed circuit boards (PCBs) for a Flight Project, it was found that a European manufacturer was building its boards to a European standard that had no requirement for copper wrap on the vias. The amount of copper wrap that was measured on coupons from the panel containing the boards of interest was less than the amount specified in IPC-6012 Rev B, Class 3. To help determine the reliability and usability of the boards, three sets of tests and a simulation were run. The test results, along with results of simulation and destructive physical analysis, are presented in this paper. The first experiment involved subjecting coupons from the panels supplied by the European manufacturer to thermal cycling. After 17 000 cycles, the test was stopped with no failures. A second set of accelerated tests involved comparing the thermal fatigue life of test samples made from FR4 and polyimide with varying amounts of copper wrap. Again, the testing did not reveal any failures. The third test involved using interconnect stress test coupons with through-hole vias and blind vias that were subjected to elevated temperatures to accelerate fatigue failures. While there were failures, as expected, the failures were at barrel cracks. In addition to the experiments, this paper also discusses the results of finite-element analysis using simulation software that was used to model plated-through holes under thermal stress using a steady-state analysis, also showing the main failure mode was barrel cracking. The tests show that although copper wrap was sought as a better alternative to butt joints between barrel plating and copper foil layers, manufacturability remains challenging and attempts to meet the requirements often result in features that reduce the reliability of the boards. Experimental and simulation work discussed in this paper indicate that the standard requirements for copper wrap are not contributing to the overall board reliability, although it should be added that a design with a butt joint is going to be a higher risk than a reduced copper wrap design. The study further shows that procurement requirements for wrap plating thickness from Class 3 to Class 2 would pose little risk to reliability (minimum 5 μm/0.197 mil for all via types).Experimental results corroborated by modeling indicate that the stress maxima are internal to the barrels rather than at the wrap location. In fact, the existence of Cu wrap was determined to have no appreciable effect on reliability.
Technical Library | 2018-05-17 11:14:52.0
Intermetallic compound (IMC) growth is being studied in earnest in this past decade because of its significant effect the solder joint reliability. It appears that from numerous investigations conducted, excessive growth of IMC could lead to solder joint failure. Leading to this, many attempts has been made to determine the actual IMC thickness. However, precise and true representation of the growth in the actual 3D phenomenon from 2D cross-section investigations has remained unclear. This paper will focus on the measuring the IMC thickness using 3D surface profilometer (Alicona Focus G4). Lead free solder, Sn3.0Ag0.5Cu (SAC305) was soldered onto copper printed circuit board (Cu PCB). The samples were then subjected to thermal cycle (TC) storage process with temperature range from 0 °C to 100 °C for 200 cycles and up to 1000 cycles were completed.
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput dema
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput dema
SMTnet Express, May 17, 2018, Subscribers: 31,044, Companies: 10,939, Users: 24,723 Statistical Aspect on the Measuring of Intermetallic Compound Thickness of Lead Free Solders Azman Jalar, Maria Abu Bakar, Roslina Ismail, Abdul Razak Daud
Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. The purpose
Surface Mount Technology Association (SMTA) | https://www.smta.org/icsr/speaker_forms/Paper-Format-Requirements.doc
absence of a current IPC industry specification for remaining Cu plating thickness after rework, an OEM specification of 0.5 mils of remaining Cu plating was used14. Figure 6. Cu Thickness Measurement Locations EXPERIMENTAL RESULTS The statistical results
winsouce.jpg)
