Industry Directory | Manufacturer
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
Industry Directory | Manufacturer
The Elpos Ltd. is an company that designs and manufactures industrial electronic control devices for electric heating systems. Our company is located in Croatia/EU
New Equipment | Coating Equipment
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $48,000. SimpleCoat basic model without tilt and rotate
New Equipment | Board Handling - Conveyors
technical parameter： Model 1200 Track length 1200mm Supply power Ac220v/ single phase 50/60hz PCB size Wide 50-400 mm We
Electronics Forum | Mon Aug 31 19:15:36 EDT 2020 | dilogic
We have GSM2 with FlexJet heads (an older one). There are 7 sensor amplifiers (with LED indicators) for touchdown detection and one for z-safe detection which is of a different type (with numeric LED indicator). I can't find anywhere what the right n
Electronics Forum | Thu Nov 08 02:09:05 EST 2018 | vinitverma
If the nozzle gets changed properly but the machine still gives the sensor, then the FNC nozzle detection sensor needs to be adjusted. It is a set of 2 sensors on a plate on the either side of the FNC. If the nozzle is not changed successfully and ge
Used SMT Equipment | Pick and Place/Feeders
1. Mounting speed: 30000CPH (IPC standard) 2. Number of feeders: 140 3. Number of mounting heads: 12 4. Mounting size: 330mm x 250mm 5. Size range: 0402MM ~ 50mm x 100mm square device 6. Component height: 15mm 7. Mounting accuracy: ±30&m
Used SMT Equipment | Pick and Place/Feeders
1. Mounting speed: 30000CPH (IPC standard) 2. Number of feeders: 140 3. Number of mounting heads: 12 4. Mounting size: 330mm x 250mm 5. Size range: 0402MM ~ 50mm x 100mm square device 6. Component height: 15mm 7. Mounting accuracy: ±30&m
Industry News | 2013-11-05 23:02:54.0
Nordson ASYMTEK will introduce the Spectrum™ II at Productronica this year, marking the 6-year anniversary of the introduction of the Spectrum series of high-speed, high-accuracy dispensing platforms. The Spectrum II S2-900 Series leverages the same small footprint of 600mm x 1321mm as the original Spectrum to provide maximum productivity with minimum manufacturing floor space, but improves the precision, accuracy, and speed of the system to rival much larger platforms.
Industry News | 2016-01-11 11:16:03.0
ISVI Corp. announces the signing of a distribution agreement with Advanced Imaging Components (AIC), Inc. to address the Japanese Automated Imaging market with sales and support of its cameras.
Parts & Supplies | Assembly Accessories
FUJI S65846 NXT working head suction nozzle detection sensor
KE750 Wait sensor cable asm E94647250A0 E94637210A0 IN SENSOR CABLE ASM. E94637250A0 IN SENSOR CABLE ASM. E9463729AA0 STOP SENSOR (R) ASM. E94647050A0 XMOTOR RELAY CABLE ASM E94647210A0 WAIT SENSOR CABLE ASM. E94647250A0 WAIT SENSOR CABLE ASM.
Technical Library | 2024-02-02 07:48:31.0
Maximizing Efficiency: The High-Speed SMT Line With Laser Depanelizer In today's rapidly evolving electronics manufacturing landscape, optimizing efficiency, cost-effectiveness, and precision remains paramount. Businesses engaged in producing industrial control boards, computer motherboards, mobile phone motherboards, and mining machine boards face ongoing challenges in streamlining production processes. The integration of expensive equipment strains budgets, making the creation of an efficient, cost-effective high-speed SMT line a daunting task. However, a solution exists that seamlessly combines these elements into a singular, high-performance, and cost-effective SMT line. Let's delve into the specifics. A Comprehensive High-Speed SMT Line Our innovative solution amalgamates two pivotal components: a cutting-edge SMT (Surface Mount Technology) production line and a laser cutting line equipped with a depanelizer. The SMT Production Line The high-speed SMT line comprises several essential components, each fulfilling a unique role in the manufacturing process: 1. PCB Loader: This initial stage involves loading boards onto the production line with utmost care. Our Board Loader prioritizes safety, incorporating various safety light curtains and sensors to promptly halt operations and issue alerts in case of any anomalies. 2. Laser Marking Machine: Every PCB receives a unique two-dimensional code or barcode, facilitating comprehensive traceability. Despite the high-temperature laser process potentially leading to dust accumulation on PCB surfaces, our dedicated PCB Surface Cleaner swiftly addresses this issue. 3. SMT Solder Paste Printer: This stage involves applying solder paste to the boards, a fundamental step in the manufacturing process. 4. SPI (Solder Paste Inspection): Meticulous inspections are conducted at this stage. Boards passing inspection proceed through the NG (No Good) Buffer Conveyor to the module mounters. Conversely, "No Good" results prompt storage of PCBs in the NG Buffer Conveyor, capable of accommodating up to 25 PCBs. Operators can retrieve these NG boards for rework after utilizing our specialized PCB Mis Cleaner to remove solder paste. 5. Module Mounters: These machines excel in attaching small and delicate components, necessitating precision and expertise in the module mounting process. 6. Standard Pick And Place Machines: The selection of these machines is contingent upon your specific BOM (Bill of Materials) list. 7. Pre-Reflow AOI (Automated Optical Inspection): Boards undergo examination for component quality at this stage. Detected issues prompt the Sorting Conveyor to segregate boards for rework. 8. Reflow Oven: Boards undergo reflow soldering, with our Lyra series reflow ovens recommended for their outstanding features, including nitrogen capability, flux recycling, and water cooling function, ensuring impeccable soldering results. 9. Post-Reflow AOI: This stage focuses on examining soldering quality. Detected defects prompt the Sorting Conveyor to segregate boards for further inspection or rework. Any identified defects are efficiently addressed with the BGA rework station, maintaining the highest quality standards. 10. Laser Depanelizer: Boards advance to the laser depanelizer, where precision laser cutting, often employing green light for optimal results, ensures smoke-free, highly accurate separation of boards. 11. PCB Placement Machine: Cut boards are subsequently managed by the PCB Placement Machine, arranging them as required. With this, all high-speed SMT line processes are concluded. Efficiency And Output This production line demonstrates exceptional productivity when manufacturing motherboards with approximately 3000 electronic components, boasting the potential to assemble up to 180 boards within a single hour. Such efficiency not only enhances output but also ensures cost-effectiveness and precision in your manufacturing processes. At I.C.T, we specialize in crafting customized SMT production line solutions tailored to your product and specific requirements. Our equipment complies with European safety standards and holds CE certificates. For inquiries or to explore our exemplary post-sales support, do not hesitate to contact us. The I.C.T team is here to elevate your electronics manufacturing to new heights of efficiency and cost-effectiveness.
Technical Library | 2017-04-20 19:16:17.0
IST AG thin film mass flow sensors offer solutions for a wide variety of flow applications. The thin film and membrane technologies incorporate highly accurate temperature sensors and heaters as core elements of the sensors. IST AGs flow sensors are applicable in gas (liquids upon request), have an operating temperature range of -30 °C to +450 °C, and can measure low rate and direction from 0.0001 m/s (microflowSens) to 100 m/s (respectively from 1 mL/min to 10 L/min). In addition to measuring flow rates, our sensors can detect the presence of a liquid, biofilm or bubbles as well as indicate liquid level. Development channels guarantee the best possible adaptation of our sensors, whether in terms of dynamic range, response time, directional detection or ambient conditions.
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $48,000. SimpleCoat basic model without tilt and rotate
1. Mounting speed: 30000CPH (IPC standard) 2. Number of feeders: 140 3. Number of mounting heads: 12 4. Mounting size: 330mm x 250mm 5. Size range: 0402MM ~ 50mm x 100mm square device 6. Component height: 15mm 7. Mounting accuracy: ±30&m
Career Center | Brooklyn, New York USA | Engineering
Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Ci
Career Center | San Pedro Sula, Cortes Honduras | Engineering,Maintenance,Management,Technical Support
Preventive maintenance on SMT machines. Corrective maintenance on SMT Machines Schedule of preventive maintenance programs. Minimum Inventory control for spare parts Automation process on SMT Lines Work Instructions for maintenance procedur
SMTnet Express, March 10, 2022, Subscribers: 25,827, Companies: 11,537, Users: 27,094 Study on Medical Sensors The advances in electronics allowed the development of smart miniature devices called medical sensors, that can collect
SMTnet Express, April 21, 2022, Subscribers: 25,664, Companies: 11,565, Users: 27,188 Deep Learning Based Defect Detection for Solder Joints on Industrial X-Ray Circuit Board Images Quality control is of vital importance during
GPD Global | https://www.gpd-global.com/dispense-pump-sensor-fluid-level.php
Contacts Technical Support About Company Profile News Events Awards Employment » System Models » DS Series » Dispense Pump Sensor Syringe Fluid Level Dispense Pump - Syringe Fluid Level Available for all MAX Series and DS Series dispense platforms is pump syringe fluid level detection, and GPD's
KingFei SMT Tech | http://www.smtspare-parts.com/sale-13400579-juki-laser-align-sensor-mnla-head-fx1-machine-e9611729000.html
increases dirt detection. To counter this, we recommend cleaning sensor windows by spraying ethanol antistatic agents containing cationic surfactants. Warning
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
winsouce.jpg)