Mfg. or Printed Cicuit Board Connectors. Product lines include: Edgecard, DIN 41612, 2mm Hard Metic, D-Subminiature, Centronic and Headers.
Industry Directory | Consultant / Service Provider / Manufacturer / Other
Welcome to the website of Conex Screws and Fasteners: India's largest manufacturers of Brass Screws and Brass fasteners. We are one of the key players in the field of all kinds of Brass, Copper and Stainless Steel Screws.
VME bus applications computer, telecommunications, industrial controllers, test equipment
A transformer-mounting bracket specifically designed to fit a standard 35mm DIN rail The DIN-497 is a patent-pending bracket that incorporates 7 threaded #10-32 mounting holes for use with power transformers utilizing either a channel frame or "L"
Electronics Forum | Fri Apr 29 17:42:50 EDT 2022 | jdengler
It's either a 6 pin DIN of 6 pin Mini DIN. The diameters are different so check that.
Electronics Forum | Tue May 28 14:01:09 EDT 2002 | zanolli
Hello Sally, The force required for press fit connectors will vary depending on the connector type. The force will also very significantly from one supplier to another for the same connector. To give you an example; for a .100" DIN 41612 connector
Used SMT Equipment | In-Circuit Testers
Agilent 11896A Agilent/HP 11896A Polarization State Controller The Agilent 11896A Motorized Polarization Controller covers a wide wavelength range (1250 - 1640 nm) for measuring optical components, and its optical fiber loop design provides all
Used SMT Equipment | In-Circuit Testers
Agilent 8158B-001-011 OPTICAL ATTENUATOR The HP/Agilent 8158B is a programmable optical attenuator for singlemode and multimode optical fibers with a numerical aperature up to 0.3. Because of the advanced optical system, the attenuation can be
Industry News | 2003-06-17 08:50:16.0
The CECC-approved DIN EN60603-2 (DIN41612) Series is ideal for electronics equipment requiring reliable yet inexpensive circuit board interconnection.
Industry News | 2003-07-02 08:46:01.0
A full range of PCB mount SSRs are available on the compact DIN Rail assembly.
Parts & Supplies | Pick and Place/Feeders
Drill bushing analog DIN 172-A 18x16
Technical Library | 2017-07-13 16:16:27.0
Controlled humidity and temperature controlled surface insulation resistance (SIR) measurements of flux covered test vehicles, subject to a direct current (D.C.) bias voltage are recognized by a number of global standards organizations as the preferred method to determine if no clean solder paste and wave soldering flux residues are suitable for reliable electronic assemblies. The IPC, Japanese Industry Standard (JIS), Deutsches Institut fur Normung (DIN) and International Electrical Commission (IEC) all have industry reviewed standards using similar variations of this measurement. (...) This study will compare the results from testing two solder pastes using the IPC-J-STD-004B, IPC TM-650 2.6.3.7 surface insulation resistance test, and IPC TM-650 2.3.25 in an attempt to investigate the correlation of ROSE methods as predictors of electronic assembly electrical reliability.
Technical Library | 2019-12-13 00:39:29.0
Salt spray corrosion chamber can test the ability of material and its protective layer to resist salt mist corrosion, or compare the process quality of similar protective layers, at the same time; this equipment is suitable for parts, electronic components, protective layer of metal material and other industrial products. Salt spray test is divided into neutral and acid test. What is the difference between neutral and acid in salt spray test? First, the temperature applied in the test method is different: Neutral test: a. Laboratory:35°C ±1°C, b. Saturated air drums:47°C ±1°C Acid test: a. Laboratory:50°C ±1°C, b. Saturated air drums:63°C ±1°C Second, the production material is different,neutral test chamber adoptes the traditional PVC plates, acid test chamber asopts PP sheet,which is more high temperature resistance and suits strong acid test. Third. Different test methods satisfied Neutral salt spray chamber according to GB/T 2423.17-2008, GB/T 2423.18-2000, salt spray test method and GB/T 10125-1997, GB/T 10587-2006, GB10593.2-1990, GB/T 1765-1979, GB/T 1771-2007, GB/T 12967.388, GB/T 1705.8-2008, etc. In addition to the test methods specified in the national standard, acid salt spray chamber also needs to expand the standard setting such as IEC,MIL,DIN,ASTM,IS,CNS. Last, Comparison of neutral test solutions China: NaCI distilled water solution NaCI mass concentration (50 ±5) g ≤ l pH value 6.5 ≤ 7.2 United States: distilled water solution NaCI mass concentration 5% ±1% pH value 6.5 ≤ 7.2 Germany: NaCI distilled water solution NaCI mass concentration (50 ±5) g ≤ l pH value 6.5 ≤ 7.2 Japan: NaCI distilled water solution NaCI mass concentration 5% ±1% pH pH value 6.5 ~ 7.2 France: NaCI distilled water solution NaCI mass concentration 5% pH 6.5 ≤ 7.2 https://climatechambers.com/articles&latestnews/difference-between-neutral-and-acid-salt-spray-corrosion-test.html
03062054-02 Barcodelable S27 Sector 1 (left) 03062055-02 Barcodelable S27 Sector 1 (right) 03062164-01 Handscanner Dragon D131 complete 03062165-01 CABLE Handscanner D131 03062222-01 O-Ring DIN 3771 - 40 X 1,5 - N - EPDM 70 030629
03061470-02 Barcodelable S27 Sector 2 (left) 03061550S01 LITEON DVD writer and rewriter 03062039-02 Barcodelable S27 Sector 2 (right) 03062054-02 Barcodelable S27 Sector 1 (left) 03062055-02 Barcodelable S27 Sector 1 (right) 03062
Career Center | Danville, California | Sales/Marketing
Robert Riemer 129 Wilshire Ct. Danville, CA. 94526 (925) 820-6545 Home (925) 820-6546 Fax (925) 548-9633 Cell briemer@pacbell.net OBJECTIVE Seeking a challenging sales position with a dynamic company pursuing rapid, consistent growth in the electro
Career Center | Danville, California USA | Sales/Marketing
Seeking a challenging sales position with a dynamic company pursuing rapid, consistent growth in technology design, equipment or related industry. Summary: Seasoned professional with a broad-based sales background including regional management, dire
.jpg)