Jetting Simplified Jetting pumps are excellent for dispensing small volumes of fluid at high rates of speed. The NCM5000 simplifies jetting to its basic elements - this means easy set up, cleaning, and maintenance for you. The drive system is design
New Equipment | Cable & Wire Harness Equipment
Overview The STS 1100 tinning station is designed for fluxing and lead-free tin coating of stripped wire ends with cross sections up to 2.5 mm² (14 AWG) and tinning lengths up to 5 mm (0.2''). Optionally, wire ends with cross sections up 4 mm² (12 A
Electronics Forum | Tue Dec 21 12:55:41 EST 2021 | oclsc
Hi SMTnet. I am planning to inspect the nozzles for our Fuji Aimex II on more regular basis. We have the H12HS and DX mountingheads. Are the any of you have there have some experiences in how often this should be done? I do know that it depends on t
Electronics Forum | Tue Aug 03 14:28:23 EDT 2010 | keiths487
the "hooks" appear to be in good shape and are holding the nozzles up...machine will run even utilizing those head/nozzle combinations...we will check the valve, and verify proper operation, during non-production time....
Used SMT Equipment | Soldering - Selective
Used DDM Novastar Selective Solder Machine in excellent working condition. Convert your hand soldering to automated selective soldering with this machine and achieve greater throughput, accuracy, and reliability! System Benefits & Features: &
Used SMT Equipment | Repair/Rework
Manncorp RW1210 SMT / BGA Rework Station Vintage: 2014 1.3 Million Pixel, High-Definition, Split-Vision Optics with 230x Joystick-Controlled Zoom High-Resolution 15" Full Color LCD Display for Simultaneous, Superimposed Viewing of Component Leads
Industry News | 2018-10-18 10:13:08.0
The Application of the Pin-in-Paste Reflow Process
Parts & Supplies | SMT Equipment
Yamaha nozzle shaft of YG200 (Currenly, our factory have a new batch of SMT spare parts with very good advantage price, if need more info about the products , pls don’t hesitate to contact with us at any time.) Website : www.ksunsmt.com Email: j
Parts & Supplies | SMT Equipment
nozzle shaft of YV100II if need more info about the products , pls don’t hesitate to contact with us at any time.More info pls visit our website:www.ksunsmt.com. Email: alice@ksunsmt.com Skype: alice@ksunsmt.com Whats app: +86 1317047180
Technical Library | 2009-10-29 11:45:52.0
The globalization of markets results in stronger competition with clearly noticeably cost pressure. For companies producing electronic equipment it is therefore of existential importance to reduce production costs whilst maintaining a consistently high quality level of the manufactured products. Manual repair soldering that is expensive, time-consuming and cost intensive is already unacceptable due to the required quality and the reproducibility of the whole manufacturing process.
Technical Library | 2021-06-15 18:40:53.0
The jet printing of a dense mixed non-Newtonian suspension is based on the rapid displacement of fluid through a nozzle, the forming of a droplet and eventually the break-off of the filament. The ability to model this process would facilitate the development of future jetting devices. The purpose of this study is to propose a novel simulation framework and to show that it captures the main effects such as droplet shape, volume and speed. In the framework, the time dependent flow and the fluid-structure interaction between the suspension, the moving piston and the deflection of the jetting head is simulated. The system is modelled as a two phase system with the surrounding air being one phase and the dense suspension the other. Hence, the non-Newtonian suspension is modelled as a mixed single phase with properties determined from material testing. The simulations were performed with two coupled in-house solvers developed at Fraunhofer-Chalmers Centre; IBOFlow, a multiphase flow solver and LaStFEM, a large strain FEM solver. Jetting behaviour was shown to be affected not only by piston motion and fluid rheology, but also by the energy loss in the jetting head. The simulation results were compared to experimental data obtained from an industrial jetting head.
Fraunhofer-Chalmers Research Centre for Industustrial Mathematics
Jetting Simplified Jetting pumps are excellent for dispensing small volumes of fluid at high rates of speed. The NCM5000 simplifies jetting to its basic elements - this means easy set up, cleaning, and maintenance for you. The drive system is design
Electrovert's DwellFlex 4.0 is the first solder nozzle designed specifically with Industry 4.0 automation in mind. The patent pending design enables the length of the wave to be adjusted on-the-fly as variable board types are run through the wave.
Career Center | Thanjavur, India | Production,Quality Control,Technical Support
work in one year and above Quality engineer in sanmina,current work in SMT Technical engineer in coimbatore
