Industry Directory | Consultant / Service Provider
Elmet LLC is an accredited lab, primarily providing cross sectioning of circuit boards, visual and x-ray inspections of PCBAs and other metallographic and metallurgical services including SEM examination and EDS analysis.
Industry Directory | Manufacturer
Almit is one of the leading providers of solder wires, solder pastes and of course lead-free solders, which are also successfully applied in the aerospace industry, in the automotive field but also in consumer electronics.
New Equipment | Solder Materials
Soldering materials: Soldering wires Soldering pastes Stencils Soldering shots Soldering balls Fluxes Rosin liquid and gel fluxes Fluxes residues do not cause corrosion http://www.selen.hr/pokaz_kategorie.php?cid=9
New Equipment | Solder Materials
Kapp Lunar Flux™ is a slurry designed specifically for soldering casted Aluminum, Diecast, Zamak, White Metal and Pot Metal using Alumite™ solder. Residue is electrically conductive and slightly corrosive. Any flux residue should be removed with warm
Electronics Forum | Tue Dec 14 07:32:57 EST 2004 | davef
On contaminated assemblies: While you isolated part of your dendritic growth to contaminated boards, could it be that you have a similar problem with other components, rather than your flux? Is this flux new? Have you had similar problems with thi
Electronics Forum | Thu Feb 21 06:22:16 EST 2008 | gregoryyork
what is the solde finish on the bare board is it hasl? Are you using OA flux during assembly. A little more information would be good
Used SMT Equipment | Soldering - Wave
We are looking for overseas distributor / agent for our range of lead free wave soldering machines .The machine includes the following main features: Spray Fiuxer: 1) Oriental motor drives the flux spraying system. Spraying speed is adjusted accordi
Used SMT Equipment | Soldering - Reflow
A8N Main electric part uses international brand components. Temperature control design achieves international advanced level with stable and even temperature. It is suitable for soldering CSP, BGA component. Energy-saving inner oven design and heat
Industry News | 2016-06-22 15:33:28.0
Based on its recent analysis of the surface mount technology (SMT) reflow soldering equipment market, Frost & Sullivan recognizes Heller Industries, Inc. with the 2016 Global Frost & Sullivan Award for Growth Excellence Leadership. Heller Industries has made remarkable improvements to its product and technology portfolios over the last 10 years to emerge a top participant in the SMT reflow soldering equipment market.
Industry News | 2017-09-16 02:29:39.0
Heller Industries has been awarded the 2017 Global Frost & Sullivan Company of the Year Award for its surface mount technology (SMT) soldering equipment that enables Industry 4.0. - the automation and data exchange in manufacturing technologies.
Parts & Supplies | Soldering - Wave
Overseas Agent and Distributor Wanted ! Features : Spray Fiuxer: 1) Oriental motor drives the flux spraying system. Spraying speed is adjusted according to PCB board width and moving speed to ensure even spraying all time. 2) Durable “Meiji
Technical Library | 2018-05-09 22:15:29.0
Creep corrosion on printed circuit boards (PCBs) is the corrosion of copper metallization and the spreading of the copper corrosion products across the PCB surfaces to the extent that they may electrically short circuit neighboring features on the PCB. The iNEMI technical subcommittee on creep corrosion has developed a flowers-of-sulfur (FOS) based test that is sufficiently well developed for consideration as an industry standard qualification test for creep corrosion. This paper will address the important question of how relative humidity affects creep corrosion. A creep corrosion tendency that is inversely proportional to relative humidity may allow data center administrators to eliminate creep corrosion simply by controlling the relative humidity in the data center,thus, avoiding the high cost of gas-phase filtration of gaseous contamination. The creep corrosion relative humidity dependence will be studied using a modified version of the iNEMI FOS test chamber. The design modification allows the achievement of relative humidity as low as 15% in the presence of the chlorine-releasing bleach aqueous solution. The paper will report on the dependence of creep corrosion on humidity in the 15 to 80% relative humidity range by testing ENIG (gold on electroless nickel), ImAg (immersion silver) and OSP (organic surface preservative) finished PCBs, soldered with organic acid flux.
Technical Library | 2015-07-16 17:24:23.0
Qualification of electronic hardware from a corrosion resistance standpoint has traditionally relied on stressing the hardware in a variety of environments. Before the development of tests based on mixed flowing gas (MFG), hardware was typically exposed to temperature-humidity cycling. In the pre-1980s era, component feature sizes were relatively large. Corrosion, while it did occur, did not in general degrade reliability. There were rare instances of the data center environments releasing corrosive gases and corroding hardware. One that got a lot of publicity was the corrosion by sulfur-bearing gases given off by data center carpeting. More often, corrosion was due to corrosive flux residues left on as-manufactured printed circuit boards (PCBs) that led to ion migration induced electrical shorting. Ion migration induced failures also occurred inside the PCBs due to poor laminate quality and moisture trapped in the laminate layers.
DescriptionThe Electrovert® Electra™ is an advanced, meticulously engineered wave soldering system designed for high-mass and high-volume manufacturers. Although intended for maximum throughput requirements, the Electra also offers maximum process fl
Career Center | Houston, Texas USA | Engineering,Management,Quality Control,Technical Support
Seasoned Process & Quality Engineer. Degreed Chemical Engineer. 20+ years in Electronics Semiconductor manufacturing. Proficient in Quality Statistical tools, Design of Experiments, FMEAs, APQP, PPAP, ISO 9000, ISO/TS 16949 etc.
Career Center | Poplar Grove, Illinois USA | Management,Production,Quality Control,Technical Support
20+ years in electronic manufacturing, sales support,customer support.
SMTnet Express August 1, 2013, Subscribers: 26182, Members: Companies: 13440, Users: 34997 A Review of Corrosion and Environmental Effects on Electronics by Rajan Ambat; Technical University of Denmark Electronic industry uses a number of metallic
SMTnet Express, July 16, 2015, Subscribers: 23,036, Members: Companies: 14,463, Users: 38,550 Testing Printed Circuit Boards for Creep Corrosion in Flowers of Sulfur Chamber iNEMI (International Electronics Manufacturing Initiative) Qualification
