Industry Directory | Manufacturer / Manufacturer's Representative
Manufacture of small appliances
Industry Directory | Manufacturer's Representative
Hang Lung Electronic Technology Co., Ltd. is a professional and large sacled printed circuits board manufacturing enterprise in Shenzhen, which engaged in 1-24 layer PCB, multilayer PCB, Blind&Buried
Dual Lane SMT Reflow Oven Nitrogen soldering process dual rail conveyor Weight Appx.:3060Kg Dimension 6300*1680*1530mm Product description: 10 Zones Dual Rail Nitrogen SMT Reflow Oven KTR-1000D-N Manufacturer, Nitrogen soldering process, dual
New Equipment | Solder Materials
Fine Line Stencil is a technology leading manufacture, committed to delivering the highest quality laser stencils and related products in the industry. Fine Line Stencils highly-polished PrintMaster and Slic-Blade nickel squeegee blades offer impro
Electronics Forum | Thu Jan 02 04:56:38 EST 2014 | bobpan
Here is a couple of things to look at: 1. Make sure the boards are plugged into the correct position. Also just leave out the transport card to see if its hanging up the machine. The transport board should be the board all the way to the right. 2. M
Electronics Forum | Fri Jan 03 15:16:54 EST 2014 | ppminc
If all of the lights are on, on the operator interface panel usually that means the EPCU is defective or not fully seated correctly. If you swapped out the EPCU board from another machine you need to make sure its the same type of machine. If it has
Industry News | 2013-01-04 15:59:09.0
04 Jan 2013 Heller Industries Shanghai will be celebrating its 10th year of operation on Jan 31, 2013.
Industry News | 2010-11-19 14:33:06.0
Steve Wozniak, co-founder of Apple Computer, will be trekking out to IPC APEX EXPO to keynote and hang out with “his kind of people.” IPC invites you to join "the Woz" and your colleagues in electronics manufacturing at IPC APEX EXPO 2011
Parts & Supplies | Pick and Place/Feeders
One hanging angle right
Technical Library | 2016-11-03 17:53:56.0
We present a novel method for fabricating a high-density carbon nanotube microelectrode array (MEA) chip. Vertically aligned carbon nanotubes (VACNTs) were synthesized by microwave plasma-enhanced chemical vapor deposition and thermal chemical vapor deposition. The device was characterized using electrochemical experiments such as cyclic voltammetry, impedance spectroscopy and potential transient measurements. Through-silicon vias (TSVs) were fabricated and partially filled with polycrystalline silicon to allow electrical connection from the high-density electrodes to a stimulator microchip.In response to the demand for higher resolution implants, we have developed a unique process to obtain a high-density electrode array by making the microelectrodes smaller in size and designing new ways of routing the electrodes to current sources.
Technical Library | 2020-10-08 01:01:01.0
Flexible hybrid electronics (FHE) is emerging as a promising solution to combine the benefits of printed electronics and silicon technology. FHE has many high-impact potential areas, such as wearable applications, health monitoring, and soft robotics, due to its physical advantages, which include light weight, low cost and the ability conform to different shapes. However, physical deformations in the field can lead to significant testing and validation challenges. For example, designers must ensure that FHE devices continue to meet their specs even when the components experience stress due to bending. Hence, physical deformation, which is hard to emulate, has to be part of the test procedures for FHE devices. This paper is the first to analyze stress experience at different parts of FHE devices under different bending conditions. We develop a novel methodology to maximize the test coverage with minimum number of text vectors with the help of a mixed integer linear programming formulation. We validate the proposed approach using an FHE prototype and COMSOL Multiphysics simulations
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
MACTECH Instructional Video
Career Center | lagos, Nigeria | Maintenance
CHEVRON OIL AND GAS LIMITED NO 8 MACARTH STREET VICTORIA ISLAND LAGOS/NIGERIA CHEVRON OIL AND GAS LIMITED intends to Invite experienced and reputable persons having prime experience and capable of providing services of a plumber(as individuals or
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Pressure-Reservoir-User-Guide-22200605.pdf
. 5. Remove the lid and hook the end of the handle (Figure 2, Item B) in the support bracket (Item A) so it hangs as shown (Item C). NOTE: Be sure to fully support the weight of the reservoir lid when removing the lid from the reservoir
