New Equipment | Rework & Repair Equipment
2016 hot collection WDS-700 automatic iphone glued chip rework station with HD camera WDS-700 bga rework station video: https://youtu.be/pmHfF48dRrY Independent 2 heating zones temperature control system Up-heater power: 1200W Down-heater power: 1
New Equipment | Test Equipment - Bond Testers
Fully integrated solution for automated wafer testing (up to 300 mm). The Condor Sigma W12 is specifically designed for precision shear testing and Cold Bump Pull (CBP) on wafer or at wafer level. The system has the largest X/Y and fastest stages av
Electronics Forum | Thu Mar 20 11:30:58 EDT 2014 | dave222
Hello Again. I little more information about the issue: when trying to zero machine head the spindles move up and down about 6 times before giving the error code. also I notice that all the LEDs on the circuit board are off. L11 - L18. and the nume
Electronics Forum | Tue Sep 29 09:39:02 EDT 2015 | rgduval
Hey, David, For service, check out 4TechUSA over in Detroit. It's not Chicago, but, you're closer to Detroit up there than I am down here in Houston :) For your issue....do you have access to the UIC Knowledge Base? The first issue I found in the
Used SMT Equipment | SMT Equipment
ADBHF8060 QP351E-OF SAM6580 SERVO MOTOR SGMAH-A5A1A4C (AC,50W,Multi Phase) MTU9E(TY) SAM6590 SERVO MOTOR SGMAH-04A1A4C (AC,400W,Multi Phase) MTU9E(TZ) SAM6600 SERVO MOTOR SGMM-A1C3FJ14 (AC,10W,Multi Phase) QP341E/NP1(Q) POWER SUPPLY P/N:T4195E D
Industry News | 2009-04-23 21:31:21.0
W�rth Elektronik's cantilever sensors revolutionise applications such as ERP and identification systems
Industry News | 2021-12-24 20:18:41.0
The throttle Position Sensor (TPS), located on the butterfly spindle, is operated by the throttle, and its installation varies according to the structure. For a traditional mechanical cable throttle, the throttle position sensor is usually installed on the side of the throttle body in the form of an independent component. And its rotation openness is driven by the throttle shaft, as shown in figure 2. For the commonly used electronic throttle, the throttle position sensor is integrated into the electronic throttle control component, as shown in figure 3.
Parts & Supplies | General Purpose Equipment
Single Ejector 9965 000 09042 Assembleon Valve Ejector Set 37W+44W+13W KGB-M7163-A0X Detail information: 1.Part Number: 9965 000 09042 2.Part Name: Single Ejector 3.Model: 37W+44W+13W 4.Machine Mode: Assembleon Topal XII Model PHILIPS PA
Parts & Supplies | Assembly Accessories
Detailed Product Description Brand: Phillip Part Name: Packing Part Number: 5322 532 12547 Color: Black Material: Rubber Condition: New 5322 532 12547 Packing SMT Spare Parts For Phillips Machine Detail Information: 1, Part Name: Packing
1.The top heater can move freely along the X, Y axis in the IR preheating area It is good for many BGA chips distribution at different positions in the PCB board which need repair X-shaped infrared laser can do rapid location After location the elect
The Condor Sigma W12 is specifically designed for precision shear testing and Cold Bump Pull (CBP) on wafer or at wafer level. The system has the largest X/Y and fastest stages available in the industry, to reach all positions on the wafer with the t
KingFei SMT Tech | http://www.smtspare-parts.com/sale-13400579-juki-laser-align-sensor-mnla-head-fx1-machine-e9611729000.html
Laser Align Sensor (MNLA Head) Check to see if there is any dirt on the sensor window. If the sensor window is dirty or unclear, clean it with clean cloth or gauze lightly moistened with alcohol. Notes
| https://www.feedersupplier.com/sale-21034225-fcm-head-encoder-smt-machine-parts-assembleon-read-head-9498-396-00848.html
FCM Head Encoder Smt Machine Parts Assembleon Read Head 9498 396 00848 Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
.gif)
