Industry Directory | Distributor / Manufacturer
Electronic Manufactoring Services specialised on transparent conductive Films and on a cold pick & place process.
Industry Directory | Manufacturer
Laserssel Corporation is a leading provider of laser selective soldering technology supporting global semi-conductor, automotive, consumer, communications, military and industrial segments.
ELECTRONIC MANUFACTURING SERVICES (www.sun-tec.ch) ON TEMPERATURE SENSITIVE MATERIALS: SUN-TEC has developed its own cold curing, solvent free contact glues to be able to pick and place SMD systems on heat sensitive substrates. That is why SUN-TEC's
The I-2000 Series of UV printing inks were designed for heat sensitive substrates in a wide spectrum of colors. Resistant to solvents, acids and bases, these UV inks will pass Military Specifications 893 and 775. Lite Fast I-2000 adheres to a wide
Electronics Forum | Wed Oct 14 01:17:40 EDT 2020 | SMTA-64386317
Data sheet allows of 250 DegC peak temperature and we are using below 240 DegC but still seeing high fal out. Manufacturer diagnose as BE charges loss due to heat. Hence, looking for anything extra could be done to minimize this defect. There is no w
Electronics Forum | Tue Apr 11 20:37:06 EDT 2000 | Dave F
Rich: Now that�s a great question!!! You�re corrrect. Primary-side temperature is the driver of the differences in the sensitivity to moisture between SMT and PTH devices that you�re finding. * Primary-side temperature for SMT ~= Secondary-side te
Used SMT Equipment | Tape and Reel
I have an excellent condition QMT 1100, was rarely used then packaged up and put in storage. If you have any questions feel free to shoot me an email at wrestler470@yahoo.com The QMT-1100 gives you the capability to seal with
Used SMT Equipment | In-Circuit Testers
FLIR A320 High Resolution, Plug & Play Infrared Camera for Machine Vision The FLIR A320 Infrared Camera is an affordable and accurate solution for machine vision and automation systems that require non-contact imaging and temperature measurement
Industry News | 2016-06-27 14:59:09.0
GPD Global introduces the NEW TempView Thermal Imaging System that ensures the success of heated dispensing processes like Underfill, Encapsulations, Dam and Fill, and more. The TempView Thermal Imaging System monitors the temperature of the entire substrate for complete heat profile characterization. Regions of the product may be selected for monitoring during the heating process. Now you can accurately monitor temperature of specific devices to be sure they are up to temperature before starting a process.
Industry News | 2003-07-02 08:54:26.0
A novel unreinforced, thermally conductive, pressure sensitive adhesive tape delivers very high bond strength to low-energy surfaces.
Parts & Supplies | Soldering - Reflow
This reflow oven is top quality oven represent the world's best low cost, high performance solder reflow sytem. The sensor is designed in the front of tip and the temperature induction is very exact and sensitive, the speed of heating and recovery of
Parts & Supplies | Repair/Rework
PG-P6860 Main Features: 1、 The top heater can move freely along the X, Y axis in the IR preheating area. It is good for many BGA chips distribution at different positions in the PCB board which need repair. X-shaped infrared laser can do rapid lo
Technical Library | 2021-02-20 00:55:47.0
Customers must be able to rely on accurate humidity indication as an assurance of SMD quality and fitness for processing and use. Without it, they might accept SMDs from suppliers that have already been irreparably damaged by moisture during storage or transit. Or, they might approve for processing SMDs that have been improperly or insufficiently heat-dried. Beyond the processing questions, there are financial questions: Where did the dry pack problems originate and who--supplier, customer, shipper--is financially responsible for the damaged SMDs? In response, Clariant, the originator of the color change humidity indicator card, and a member of the JEDEC's Subcommittee 14.1, "Reliability and Test Methods for Packaged Devices," created a new "non-reversible" halogen and cobalt dichloride free humidity indicator card. This HIC combines two reversible indicators (5% and 10%) with a new non-reversible (60% RH) indicator spot. (Figure 1) The 5% and 10% reversible spots work the way similar indicators do: they change color from blue (dry), to lavender, to pink (wet) to indicate humidity exposure at the indicated levels. If humidity levels drop, they will gradually revert back to blue.
Technical Library | 2019-09-24 15:41:53.0
This paper focuses on three different coating material groups which were formulated to operate under high thermal stress and are applied at printed circuit board manufacturing level. While used for principally different applications, these coatings have in common that they can be key to a successful thermal management concept especially in e-mobility and lighting applications. The coatings consist of: Specialty (green transparent) liquid photoimageable solder masks (LPiSM) compatible with long-term thermal storage/stress in excess of 150°C. Combined with the appropriate high-temperature base material, and along with a suitable copper pre-treatment, these solder resists are capable of fulfilling higher thermal demands. In this context, long-term storage tests as well as temperature cycling tests were conducted. Moreover, the effect of various Cu pre-treatment methods on the adhesion of the solder masks was examined following 150, 175 and 200°C ageing processes. For this purpose, test panels were conditioned for 2000 hours at the respective temperatures and were submitted to a cross-cut test every 500 h. Within this test set-up, it was found that a multi-level chemical pre-treatment gives significantly better adhesion results, in particular at 175°C and 200°C, compared with a pre-treatment by brush or pumice brush. Also, breakdown voltage as well as tracking resistance were investigated. For an application in LED technology, the light reflectivity and white colour stability of the printed circuit board are of major importance, especially when high-power LEDs are used which can generate larger amounts of heat. For this reason, a very high coverage power and an intense white colour with high reflectivity values are essential for white solder masks. These "ultra-white" and largely non-yellowing LPiSM need to be able to withstand specific thermal loads, especially in combination with high-power LED lighting applications. The topic of thermal performance of coatings for electronics will also be discussed in view of printed heatsink paste (HSP) and thermal interface paste (TIP) coatings which are used for a growing number of applications. They are processed at the printed circuit board manufacturing level for thermal-coupling and heat-spreading purposes in various thermal management-sensitive fields, especially in the automotive and LED lighting industries. Besides giving an overview of the principle functionality, it will be discussed what makes these ceramic-filled epoxy- or silicone-based materials special compared to using "thermal greases" and "thermal pads" for heat dissipation purposes.
These are the instructions for the BEST Heatshields(TM) an effective, high tech simple way to shield heat sensitive components during reflow/rework. This ceramic-based non-woven material, when properly deployed, will protect components so that they d
Career Center | New Castle, Pennsylvania USA | Production
Surface Mount Tech - Printed Circuit Board (PCB) Summary: **All applicants must be familiar with: Quad 4C equipment*** Will be responsible for Surface Mount Parts and Screen Printing Other responsibilities may include: Moves controls to activate