Industry Directory | Manufacturer
DriSteem provides reliable and efficient humidity control, evaporative cooling, and water treatment solutions for commercial and industrial applications.
Industry Directory | Manufacturer
Designer and manufacturer of custom electronic controllers. Focused on motor controls and appliance controls. RoHS and non-RoHS. SMD and Through Hole equipment. Conformal coating and light assembly.
New Equipment | Board Handling - Storage
The ACS1100 intelligent automatic warehouse for SMD coils has been specially designed and made to achieve an optimum performance as regards storage capacity and total size. With a maximum total capacity of 1100 reels, the ACS1100 is the optimum sol
New Equipment | Board Handling - Conveyors
Detailed Product Description Capacity: 726L Outside size: W600*D700*H1885mm Inside size: W596*D670*H1827mm RH range: 1%-40%RH Display: Microcomputer LCD display Shelves: 5 Power consumption: av 48W Voltage: 110-220V Charact
Electronics Forum | Fri Feb 04 15:58:55 EST 2011 | pjc
Yes, one to consider is Draabe in Germany: http://www.draabe.com/draabe/en/home.html
Electronics Forum | Wed Feb 02 06:58:07 EST 2011 | mikeyjryan
Hello, The company I work for are located in the North of Spain and the humidity levels in the factory range from 10 to 60 %RH. We have concerns about the low humidity effects on our ESD controls and want to invest in a system to keep the humidity a
Used SMT Equipment | Screen Printers
2.0 Cmk @ ± 12.5 μm (± 6 sigma) System alignment capability > 2.0 Cmk @ ± 25 μm (± 6 sigma) Optimum core cycle time 8 seconds Substrate size 50 mm (X) x 40.5 mm (Y) to 620 mm (X) x 508.5 mm (Y) Operating System Windows 7 Embe
Used SMT Equipment | AOI / Automated Optical Inspection
BF-Frontier is used in the inspection of large-size printed circuit boards. In this device, the unique control sequence of software and hardware, accelerated scanning mode and stable optical illumination system can allow BF-Frontier to easily complet
Industry News | 2003-07-02 08:54:26.0
A novel unreinforced, thermally conductive, pressure sensitive adhesive tape delivers very high bond strength to low-energy surfaces.
Industry News | 2022-09-21 08:23:51.0
XDry Corp. will exhibit at the SMTA Long Island Expo & Tech Forum with its representative PIT Equipment Services. The event is scheduled to take place Wednesday, Oct. 19, 2022 at the Marriott Melville in New York.
Technical Library | 2019-05-17 01:50:39.0
Dry cabinet is especially designed with fully automatic humidity control to prevent moisture related defects. This cabinet is the optimal storage expert for SMT/BGA/PCB/IC electronic components.Our newly developed design greatly increases dehumidifying system which runs faster and more reliable compare to those traditional dry cabinets. it decreases the defective rate at production line.
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
The ASYMTEK Qadence™ closed-loop flow control system maintains a stable flow rate by volume for high quality conformal coating results – automatically compensating for viscosity changes related to temperature, humidity and batch-to-batch variation.
PV inverters require reliability against ingress humidity and dust in harsh environments, like deserts. Conformal coating is critical to protect inverter PCBA. Shown with the SC-400. http://www.nordsonasymtek.com
Events Calendar | Thu Jul 20 00:00:00 EDT 2023 - Thu Jul 20 00:00:00 EDT 2023 | Suwanee, Georgia USA
Atlanta Chapter Technical Meeting: The Science of Humidity Control in Manufacturing
Events Calendar | Tue Aug 18 00:00:00 EDT 2020 - Tue Aug 18 00:00:00 EDT 2020 | ,
How to Minimize Humidity Interaction with PCBAs for Robustness
Career Center | Orange County, California USA | Quality Control
Job Description: Summary: Reporting to the COO/CTO the VP of Quality role will involve creating and/or augmenting the Quality system and programs to be a pro-active vs. a reactive structure. This will involve creating an overall quality vision, se
Career Center | San Pedro Sula, Cortes Honduras | Engineering,Maintenance,Management,Technical Support
Preventive maintenance on SMT machines. Corrective maintenance on SMT Machines Schedule of preventive maintenance programs. Minimum Inventory control for spare parts Automation process on SMT Lines Work Instructions for maintenance procedur
Career Center | Sta. Rosa, Philippines | Maintenance,Production,Technical Support
Complete knowledge in smt,aoi and reflow. 11 years working experienced in production and 5 years experienced in the field service job.
