New Equipment | Education/Training
This is a "real life" how to solder kit including both throughhole and SMT components. The board has ground planes that you would find in a real PCB assembly. Upon completion the sudents will have a working board. If you are trying to instruct new
Silver Filled, Electrically Conductive Ink for Screen Printing AG-800 is a unique, electrically conductive silver filled ink designed for high-speed screen printing in flex circuit, membrane switch, and other additive circuit applications. AG-800 i
Electronics Forum | Wed Apr 13 05:48:52 EDT 2005 | charly
hi' i need advise on immersion silver PCb shelf life. 1) what is the shelf life for Immersion silver PCB? 2) iF PCB expire, can we bake the immersion PCB? what temp & duration? 3) How long can we keep the pCB again after rebaking? (with vacuum seal)
Electronics Forum | Thu Apr 14 06:00:01 EDT 2005 | bryan
The shelf life of immersion silver is 6 to 12 months in good storage conditions. The finish is usually coated with a protective layer that inhibits oxidation (like with copper OSP). Care must be taken when handling the boards as the protective la
Industry News | 2018-10-18 11:08:03.0
Different Techniques for Plating
Industry News | 2018-10-18 10:16:53.0
Solder Tinned Pads vs Gold Plated Pads - The Importance of Selecting the Proper Surface Finish
This is what the fully assembled How to Solder Kit looks like. Depress the button and one of the LEDs will remain lit at the end (it eventually times out). You can add some kind of template so each LED position has some meaning. The PCB has a real gr
This is what the fully assembled How to Solder Kit looks like. Depress the button and one of the LEDs will remain lit at the end (it eventually times out). You can add some kind of template so each LED position has some meaning. The PCB has a real gr
Events Calendar | Wed Apr 20 00:00:00 EDT 2022 - Wed Apr 20 00:00:00 EDT 2022 | ,
Virtual Course: Selection Criteria of Surface Finish for Next Generation PCB Technologies
: I see so many places say that they build to IPC-A-610, yet I thought you build to J-STD-001, and inspect to IPC-A-610. Is this correct? Read Answer Shelf Life of Soldered Components Question
ORION Industries | http://orionindustries.com/pdfs/200mp.pdf
. Shelf Life of Tape in Roll Form 24 months from the manufacturing date when stored at 70°F (21°C) and 50% relative humidity. VI. Adhesion Retention after Immersion and Exposure (percent retention
