Industry Directory | Consultant / Service Provider
We work on the physical design, reliability and failure analysis of electronic components, solder joints and PCB assemblies. We provide expertise in the assessment of both standard SnPb and Pb-free solder joint reliability.
Industry Directory | Manufacturer
Reains Underfilm is a patented Technology which pre-formed thermoplastic, It corner or edge bonds BGA/LGA/CSP packages to the PCB to improve solder joint reliability. It tape & reel packed and fully automatic pick & place on PCB.
New Equipment | Rework & Repair Equipment
BEST HeatShield Gel™ is a thermal shield water-based gel designed to be used in the PCB rework/repair or board assembly areas in order to provide thermal protection of electronic components. It is truly a revolutionary means to protect components. It
New Equipment | Rework & Repair Equipment
Protecting Heat Sensitive Components. Are you in need of a flexible method for shielding nearby components during the PCB rework process? Do you find yourself looking for an effective heat shielding product which can be easily modified to protect a
Electronics Forum | Thu Dec 09 15:19:21 EST 2004 | nrocco
Can anyone point me in the direction to find some IPC standards for lead free solder joint reliablity tests, such as shear tests, pull tests, vibe tests, enviroment tests, etc. I need to know what the specs. are on all aspects of reliability and how
Electronics Forum | Thu Dec 09 17:45:27 EST 2004 | davef
You're correct. There is no criteria for no-lead, but there none for SnPb, either. Solder joint strength in pull/shear will vary with lead geometry, solder volume, lead metal/metallization, the way the test is done.
Used SMT Equipment | Pick and Place/Feeders
With the SIPLACE SX we have made our most successful placement solution even better: Capacity on Demand: Scale the performance of your SMT lines up or down as needed – quickly and easily The SIPLACE SpeedStar for high-speed and placement of component
Used SMT Equipment | Pick and Place/Feeders
With the SIPLACE SX we have made our most successful placement solution even better: Capacity on Demand: Scale the performance of your SMT lines up or down as needed – quickly and easily The SIPLACE SpeedStar for high-speed and placement of component
Industry News | 2003-06-23 08:49:39.0
Three Organizations from the US, Europe and Japan to
Industry News | 2003-05-23 08:24:49.0
Solid cables of up to 35mm2 cross-section now can be connected to PCBs easily, reliably and cost-effectively with the new Power Combicon range of connectors.
Parts & Supplies | Assembly Accessories
Detailed Product Description Part Name: Splice Tape Model: 8mm Feature: ESD Color: Black Brand: Panasonic Origin: China Panasonic 8mm SMT/SMD double splicing tape ESD Black Splice Tape Detail Information: 1, Part Name: Splice Tape 2, Mode
Parts & Supplies | Assembly Accessories
2018 comofaje industral SMT Fuji double splice tape silver splice tape 1.New SMT Fuji Double Splice Tape 2.Economical splicing solution 3.Increases efficiency,save component 4.For all SMD splice tape width China SMT Splice Tape with the followin
Technical Library | 2023-01-17 17:19:44.0
A test program was developed to evaluate the effectiveness of vacuum reflow processing on solder joint voiding and subsequent thermal cycling performance. Area array package test vehicles were assembled using conventional reflow processing and a solder paste that generated substantial void content in the solder joints. Half of the population of test vehicles then were re-processed (reflowed) using vacuum reflow. Transmission x-ray inspection showed a significant reduction in solder voiding after vacuum processing. The solder attachment reliability of the conventional and vacuum reflowed test vehicles was characterized and compared using two different accelerated thermal cycling profiles. The thermal cycling results are discussed in terms of the general impact of voiding on solder thermal fatigue reliability, results from the open literature, and the evolving industry standards for solder voiding. Recommendations are made for further work based on other void reduction methods and additional reliability studies.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
· What is the difference between SMT vacuum reflow soldering machine and ordinary reflow soldering machine? · What problems can be solved by smt vacuum reflow soldering machine? · What is the basic principle of vacuum reflow machine? · Ho
Hear what attendees had to say about the Electronics in Harsh Environments Conference. Start planning your participation for the 2020 event: 21-23 April 2020 | Amsterdam, Netherlands https://www.smta.org/harsh
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Mon Dec 02 00:00:00 EST 2019 - Mon Dec 02 00:00:00 EST 2019 | ,
Webinar: QFN/LGA Design, Assembly Process Issues & Reliability Failures
Events Calendar | Tue Apr 06 00:00:00 EDT 2021 - Tue Apr 06 00:00:00 EDT 2021 | ,
Capital Chapter Webinar: Next Gen Lead Free Solders for High Reliability & SMT Yield improvement
Career Center | Van Nuys, California USA | Production
We are an ISO 9000, AS 9100, ISO 13485 and NASA certified; Quick Turn, High Reliability, Contract Manufacturer of PCB assemblies, located in the San Fernando Valley. We serve the aerospace, military, space, medical and telecommunications and other L
Career Center | Williamsport, Pennsylvania USA | Engineering,Management
PRIMUS Technologies Corporation is an electronic manufacturing services (EMS) provider that produces highly reliable products for global government and commercial markets. Our company is an integrated lean enterprise that fully embodies the Six Sigma
Career Center | BANGALORE, Karnataka India | Quality Control
New Model Evaluation • Testing & Evaluation of New TV models as per the relavant standards & release the defect free product for Mass Production • Measurement of audio parameters like Max out put, distotion, S/N ratio, hum, buzz etc • To conduct aud
Career Center | Chicago, Illinois USA | Engineering,Maintenance,Production,Research and Development,Technical Support
The ability to quickly adapt myself with demonstrated leadership and reliability.
SMTnet Express July 25, 2013, Subscribers: 34972, Members: Companies: 13435, Users: 34972 Using Automated 3D X-Ray Inspection to Detect BTC Defects by Barbara Koczera; Test Research USA , An Qi Zhao; Flextronics Detecting marginal joints and other
SMTnet Express, February 6, 2020, Subscribers: 33,800, Companies: 10,971, Users: 25,576 Accurately Capturing System-Level Failure of Solder Joints Credits: DfR Solutions Consortium Projects - Thermal Cycling Reliability Consortium projects allow
Heller 公司 | http://hellerindustries.com.cn/Vacuum-Void-Reduction-Reflow.pdf
The Effect of Vacuum Reflow Processing On Solder Joint Voiding And Thermal Fatigue Reliability To be published in the Proceedings of SMTA International, September 17 - 21, 2016, Rosemont, IL
Heller Industries Inc. | https://hellerindustries.com/bit_publications/the-effect-of-vacuum-reflow-processing-on-solder-joint-voiding-and-thermal-fatigue-reliability/
The Effect of Vacuum Reflow Processing On Solder Joint Voiding And Thermal Fatigue Reliability. - Heller Industries Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New