New Equipment | Education/Training
This program is for experienced solderers seeking an in depth knowledge of the J-STD-001 Document. The course reviews this document and helps students learn how to interpret the criteria. Open and closed book exams are required after each module. Han
New Equipment | Education/Training
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic env
Electronics Forum | Thu Sep 05 23:18:03 EDT 2013 | feiyangniao
There is a new toy I received today: a NeoDen TM-240A automatic desktop pick and place machine! I’ve kept my eyes on this baby for a quite a while, and finally decided to make a purchase last week. The shipping was very fast: DHL from China, a total
Electronics Forum | Fri Aug 23 18:51:00 EDT 2002 | edahi
weve done a few evaluations for the no-flow underfill and for the reliability I think it has already passed MRT L3 @ 220C reflow. What is it specifically you're interested about the flow u/fill??
Used SMT Equipment | Pick and Place/Feeders
▶Shares overlapping capabilities of the NPM-W2, with one of the two beams removed.▶High output of up to 38.5k CPH, as well as odd-form capability with stackable stick feed support, 100N placement force and Pin-in-Paste lighting.▶Efficient 3.5-minute
LvtBK!yt7I,SQ~~_35.jpg)
Used SMT Equipment | General Purpose Equipment
Samsung Auto Pick and Place Machine 7500 pph,Lead Screw Refurbished w/ 15 8mm Feeders 2 Heads, InLine A fast (7,500 cph) machine with a long history of reliability that’s ideal for assemblers on a small budget who require high throughput. Fast and
Industry News | 2018-10-18 10:54:51.0
Circuit Board Repair and Rework
Industry News | 2017-12-21 06:34:55.0
IPC – Association Connecting Electronics Industries® applauds Congress for passing the Tax Cuts and Jobs Act, which received its final stamp of approval from the House today, following Senate approval yesterday. The bill now heads to President Trump for his signature, which is expected within days.
Technical Library | 2023-08-14 09:06:53.0
In the operation of SMT mounter, the process and integrity of the nozzle of the mounter will have a significant impact on the performance of the machine. As one of the important components of the SMT machine, it is necessary for us to carry out daily maintenance and upkeep of the SMT nozzle. To ensure that the suction nozzle of the SMT machine is intact before operation, how should we do a good job of maintaining the suction nozzle of the SMT machine during normal use? KINGSUN technical team analysis operation has the following main points: 1.Wipe the surface of the SMT nozzle with a dust-free cloth. 2.The small aperture nozzle can be passed through with a thin steel wire and then blown with an air gun. 3.The surface of the nozzle should not be soaked with corrosive solution such as alcohol, as this may cause the surface to fall off. 4.HOLDER should use a cotton swab to wipe the cavity and not damage the filter screen. 5.Regular addition of special grease to HOLDER claws. 6.According to production, it is best to regularly maintain and do other maintenance regularly. (* Suitable for Yamaha SMT machine nozzles , JUKI SMT machine nozzles, Samsung SMT machine nozzles, Panasonic SMT machine nozzles, Fuji SMT machine nozzles, Siemens SMT machine nozzles etc.) Regarding the SMT machine nozzle daily maintenance operation instructions, KINGSUN share with you here , hoping to be helpful to you. More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com , thanks.
Technical Library | 2021-12-16 01:52:32.0
Package on Packages (PoP) find use in applications that require high performance with increased memory density. One of the greatest benefits of PoP technology is the elimination of the expensive and challenging task of routing high-speed memory lines from under the processor chip out to memory chip in separate packages. Instead, the memory sits on top of the processor and the connections are automatically made during assembly. For this reason PoP technology has gained wide acceptance in cell phones and other mobile applications. PoP technology can be assembled using one-pass and two-pass assembly processes. In the one-pass technique the processor is first mounted to the board, the memory is mounted to the processor and the finished board is then run through the reflow oven in a single pass. The two-pass technique has an intermediate step in which the memory is first mounted onto the processor.
www.unisoft-cim.com/cells.html - CELLS WORKFLOW is affordable, simple to setup & use yet powerful product & job tracking software for fast New Product Introduction (NPI). The CELLS WORKFLOW software provides total traceability in manufacturing floor
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS)
The Certified IPC/WHMA-A-620 Specialist (CIS) training focuses on cable and wire harness fabrication and installation.
Training Courses | | | PCB Inspection Courses
The PCB inspection courses focus on improving PCB yield and reliability through validation and detection of defects on electronics assemblies.
Events Calendar | Tue Aug 27 00:00:00 EDT 2019 - Thu Aug 29 00:00:00 EDT 2019 | Santa Clara, California USA
Embedded Systems Conference and Expo Silicon Valley
Events Calendar | Wed May 15 00:00:00 EDT 2019 - Thu May 16 00:00:00 EDT 2019 | Boston, Massachusetts USA
Embedded Systems Conference and Expo Boston
Career Center | Manhattan, Kansas USA | Production
Ultra Electronics, ICE is a leader in small aircraft aerospace systems and components. ICE secured its first contract in the aircraft industry in 1975 by designing and manufacturing a state-of-the-art deicer timer for Cessna Aircraft Company. ICE c
