Hanwha DECAN F2 Pick and Place Machine High Speed:120,000 CPH Ultra Slim Design with a Total Length of 1.25m Applies High Rotary Modular Head Side-view Vision System Product description: Hanwha DECAN F2 Pick and Place Machine High Speed SMT Modular
JUKI RS-1R Pick and Place Machine Applicable Components: 0201~5050Board size:50×50-650×370mmFeeder inputs:max.112placement capacity:47,000 CPHProduct description: JUKI RS-1R Pick and Place Machine, Applicable Components: 0201~5050,Board size:50×50-6
Electronics Forum | Tue May 26 10:52:02 EDT 2020 | spoiltforchoice
No idea, could be a weird translation error, but its certainly something I have seen . For an FLX they just ask for this "5-6 bar, clean, dry, oil free, filtered 2 µm, connection diameter 8 mm", 40litre/min Personally I would go with a mo
Electronics Forum | Wed Apr 07 11:21:26 EDT 2004 | stefwitt
Hi Dilbert, it is a step up transformer from 3 phase 208 to 3 phase 380. Each machine does not draw more than 3 Amps per phase. However, circuit breakers are rated at 15 Amps. The transformer has three power outlets, each one has a Perilex (European)
Used SMT Equipment | Pick and Place/Feeders
Samsung Samsung CP45FV-Neo advantages: 1, simple operation, flexible line change: Samsung's CP and SM series Mounter is recognized by the industry's most simple operation of the model, which uses WinXP system, compatible with Gerb files,
Used SMT Equipment | Pick and Place/Feeders
JUKI KE-2080 Pick and Place Machine Since entering the electronics industry equipment field in 1987, JUKI has pioneered a new field with its original modular mounters that match the production innovation required by the electronics industry. The comp
Industry News | 2003-03-12 09:10:10.0
As part of the opening celebration, Teradyne will be exhibiting this week at SEMICON China and in April at Nepcon Shanghai.
Industry News | 2003-06-10 08:56:19.0
Seeing the increasing number of electronic products having image capturing functions in the market, the Company has decided to seek to further augment its manufacturing capabilities to produce image sensors to satisfy order demand for these components.
Parts & Supplies | SMT Equipment
Camera bulb holder and connection Name: CA-521; P1405; MPM camera bulb holder and connection Part No.: CA-521; P1405 Description: CA-521; P1405; CA-521 MPM camera and connect the bulb holder, original new Applicable models: UP; AP Printing
Parts & Supplies | SMT Equipment
Camera bulb holder and connection Name: CA-521; P1405; MPM camera bulb holder and connection Part No.: CA-521; P1405 Description: CA-521; P1405; CA-521 MPM camera and connect the bulb holder, original new Applicable models: UP; AP Printing
Technical Library | 2019-05-23 21:56:56.0
Automatic on-line shoe sole spraying system: automatic shoe sole spraying system, simple and convenient operation, using 3D vision positioning system. Automatic recognition and automatic generation of spraying trajectory. Robot non-contact spraying gun is used to complete the process of shoe sole spraying with maturity, stability, high speed and high precision along the predetermined trajectory. The automatic generation of spraying trajectory is the realization of shoe sole spraying technology. Shoe sole spraying characteristics: 1.Positioning System: 3D Visual Positioning 2.Components: Intelligent Robot, Laser Scanner, Industrial Computer, Gum Spraying System, Conveyor Belt, Electrical Control System, etc. 3.Spraying time: slightly different according to shoe size and spraying time Fully automatic sole spraying advantages: 1. Simple application: suitable for soles of different specifications, models and sizes 2. Faster speed: 6-8 seconds to complete sole scanning and spraying, superior to similar products at home and abroad. 3. Quality stability: gum spraying trajectory is scheduled, gum dosage is fixed, gum spraying quality is greatly improved. 4. High cost performance: the same performance, the price is only 1/3 of the same type of equipment of European brand. 5. Reduce wear and tear: glue is fully utilized and not wasted, reducing human contact with glue. Intelligent operation advantage manual only need general operation can be automated workshop, mechanical arm automatic spraying glue, accurate spraying, reduce glue waste. Environmental protection effect of long-term close contact with glue seriously affects human health and mechanical work, glue does not directly contact, do not harm the human body. Fully automatic spraying, shoe sole adhesion process for automatic spraying machine, will not cause great challenges! With the deepening of personalized shoemaking, higher requirements have been put forward for the spraying technology in shoemaking process. The method of creating spraying trajectory must be adapted to shoes of different sizes and styles. The automatic generation of spraying trajectory is one of the key technologies to realize the automation of shoe sole spraying process. The method of off-line programming and real-time generation of spraying trajectory for robots based on the three-dimensional CAD model of sole and the data of sole. A new method of generating spray trajectory by scanning the sole of shoe upper with linear structured light sensor is presented. The feasibility of the method is verified by industrial robots. Aiming at the need of generating shoe sole spray rubber trajectory based on line structured light, the format standard of IGES file of three-dimensional model of shoe sole was tested. The shoe sole contour line and the shoe sole surface were extracted, and then the offset curve of the shoe sole contour line on the shoe sole surface was calculated to obtain the spray rubber trajectory. Three-dimensional profilometer is to use structured light to obtain sole information, effectively improve the automatic shoemaking spraying process, which will help to improve the efficiency of shoemaking, improve the quality of footwear products, and promote the development of personalized shoemaking.
Technical Library | 2020-10-08 00:55:22.0
This article presents the development of a stretchable sensor network with high signal-to-noise ratio and measurement accuracy for real-time distributed sensing and remote monitoring. The described sensor network was designed as an island-and-serpentine type network comprising a grid of sensor "islands" connected by interconnecting "serpentines." A novel high-yield manufacturing process was developed to fabricate networks on recyclable 4-inch wafers at a low cost. The resulting stretched sensor network has 17 distributed and functionalized sensing nodes with low tolerance and high resolution. The sensor network includes Piezoelectric (PZT), Strain Gauge(SG), and Resistive Temperature Detector (RTD) sensors. The design and development of a flexible frame with signal conditioning, data acquisition, and wireless data transmission electronics for the stretchable sensor network are also presented. The primary purpose of the frame subsystem is to convert sensor signals into meaningful data, which are displayed in real-time for an end-user to view and analyze. The challenges and demonstrated successes in developing this new system are demonstrated, including (a) developing separate signal conditioning circuitry and components for all three sensor types (b) enabling simultaneous sampling for PZT sensors for impact detection and (c)configuration of firmware/software for correct system operation. The network was expanded with an in-house developed automated stretch machine to expand it to cover the desired area. The released and stretched network was laminated into an aerospace composite wing with edge-mount electronics for signal conditioning, processing, power, and wireless communication.
http://www.gpd-global.com GPD Global expands the performance of its automated dispense systems to run fundamental Pick & Place operations. The same automated fluid dispensing machine is capable of dispensing fluids and also Pick & Place simple compo
www.unisoft-cim.com/cells.html - CELLS WORKFLOW is affordable, simple to setup & use yet powerful product & job tracking software for fast New Product Introduction (NPI). The CELLS WORKFLOW software provides total traceability in manufacturing floor
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS)
The Certified IPC/WHMA-A-620 Specialist (CIS) training focuses on cable and wire harness fabrication and installation.
Events Calendar | Thu Jun 08 00:00:00 EDT 2023 - Thu Jun 08 00:00:00 EDT 2023 | ,
SMTA Workforce Development Webinar: PCB Design Courses and Careers in PCB Design
Events Calendar | Tue May 16 00:00:00 EDT 2023 - Tue May 16 00:00:00 EDT 2023 | Milwaukee, Wisconsin USA
"Improving Reliability of Continuity and HiPot Testing" | Training Workshop | A Professional Development Course by CAMI Research
Career Center | BANGALORE, India | Engineering,Maintenance,Production
Hi, I have 8 years experience in electronics manufacturing company. I have good knowledge in SMT process and equipment maintenance.i successfully completed more than 200 NPI's. I have good knowledge in SMT machine programming and maintenance
SMTnet Express, May 15, 2014, Subscribers: 22742, Members: Companies: 13878, Users: 36194 Performance of Light Emitting Diode on Surface Machined Heat Sink S. Shanmugan, D. Mutharasu, O. Zeng Yin, Universiti Sains Malaysia In the point
Surface Mount Technology Association (SMTA) | https://www.smta.org/education/presentations/presentations.cfm
GoToWebinar customer service at (800) 263-6317 (US and Canada, toll free), or +1 (805) 690-5753 (direct dial) or email gotowebinar@citrixonline.com . Test your connection to make sure you can access the webinar. Beyond the time frame of on-line
| https://www.feedersupplier.com/sale-13574926-180c182093-sp28-belt-1475mm-panasonic-pick-and-place-machine-part.html
? A: We are a professional wholesaler in SMT Machine, Pick and Place Machine, Reflow Oven, Screen Printer, SMT Production Line and other SMT Products. OEM
