Industry Directory | Distributor / Manufacturer
As a leading supplier of LED and LED driver products we offer a complete selection of Ultra Bright leaded and SMT LEDs and are the exclusive North American supplier for Cotco LEDs and Toshiba LEDs and Constant Current LED Drivers.
97.4 percent), improving luminance by more than 30 percent. Unlike competitive products, Gore DRP reflectors retain their high reflectance with long-term exposure to heat and UV radiation generated by flat panel constructions. Other benefits of Gore
New Equipment | SMD Reel Storage
The ACS400 intelligent dynamic warehouse for SMD/PTH carriers and components has been developed to satisfy the storage needs of the most varied types of elettronic and others components. With the possibility of configuring up to 480 different positi
Electronics Forum | Thu Jan 06 10:56:32 EST 2005 | Rob
If the Leds are not in close proximity then LDR's can be used connected to a node on the ICT/wired into a micro for a simpler board - you can then test for luminous intensity as well as absence. Else you could use a cheap CCD camera with some simple
Electronics Forum | Tue Sep 04 13:33:55 EDT 2007 | floydf
We "bar" solder them too. (It's really pulsed resistance welding). It's slow but reliable. They seem to be designed for this process. By the way, Luxeon just came out with new LEDs that have nearly the same luminous flux, but that can withstand leadf
Used SMT Equipment | In-Circuit Testers
Konica Minolta LS-100 Luminance Meter The LS 100 is a compact lightweight meter for measuring the luminance of light sources or reflective surfaces. The TTL (through-the-lens) viewing system enables accurate targeting of the subject. - See mor
Used SMT Equipment | In-Circuit Testers
Konica Minolta LS-100 Luminance Meter The LS 100 is a compact lightweight meter for measuring the luminance of light sources or reflective surfaces. The TTL (through-the-lens) viewing system enables accurate targeting of the subject. - See mor
Industry News | 2003-04-23 08:21:34.0
Rohm has a new series of ultrasmall high-brightness side-emitting chip LEDs that use built in reflectors and lenses to deliver optimum luminous intensity from minimal PCB footprint and power drain.
Industry News | 2009-10-21 09:40:33.0
The daylight white TLWK1100C LED delivers luminous intensity of 1700mcd from a drive current of 20mA.
Parts & Supplies | Assembly Accessories
SMT MACHINE GENUINE JUKI SPARE PARTS JUKI ATC OFFSET BOSS6 ASSY 40008108 JUKI Pats Specifications: Brand Name JUKI ATC OFFSET BOSS6 ASSY Part number 40008108 Model JUKI SMT MACHINE SPARE PARTS Ensure Test in machine confirmation Guarantee
Parts & Supplies | Pick and Place/Feeders
HITACHI GXH GXH-3 Luminous body: P/N:630 161 8654 NAME:SENSOR PELEC Model:VBA-D240-P
Technical Library | 2014-11-18 23:59:30.0
Performance degradation of packaging material is an important reason for the lifetime reduction of LED. In order to understanding the failure behavior of packaging material, silicone and phosphor were chosen to fabricate LED samples within which an aging test at 125℃ was performed. The result of online luminance measurement showed that LED samples with both silicone and phosphor had the highest luminance decay rate among all test samples because the carbonization of silicone and the consequent outgassing reduced the luminance quickly. The result of the luminance variance with test time was analyzed and an exponential decay model was developed with which the lifetime of LED under high temperature could be estimated.
JUKI Automation Systems at the IPC Apex 2015; showcasing Intelligent Storage Systems.
JUKI Automation Systems at the IPC Apex 2015; showcasing Intelligent Storage Systems.