Industry Directory | Distributor / Manufacturer / Manufacturer's Representative
European supplier of Lead Free solder products like the paste compositions SnZnAl (low melting point), SAC, SnBi, flux, BGA Balls, solder wire, N2 Reflow Systems.
Industry Directory | Manufacturer
Suppliers of solder pastes, wave soldering liquid fluxes and SMT adhesives and cored solder wires for all soldering requirements.
- Higher power optimizes temperature control. Suitable for high melting point requirement of lead- free solder�� - Soldering iron with built-in suction that effectively absorbs poisonous fumes produce during the process of soldering. It also purifies
New Equipment | Solder Materials
5N Plus produces indium in pure metal, chemical and low melting point alloy forms for use in electronics, solar cells and optics. Indium is essential in forming transparent electrodes from indium tin oxide (ITO) in liquid crystal displays (LCD) and t
Electronics Forum | Tue Sep 12 08:39:38 EDT 2017 | jefri_simorangkir
we are turning on the printer, suddenly the printer is off after checking there is solderball on pad capacitor component 0603 our question is what can a solderball stuck on one pad can when melting and causing shortsolder (being connected with other
Electronics Forum | Fri Nov 05 15:44:50 EST 1999 | Tim Jensen
Brian, 96.5Sn/3.5Ag is eutectic at 221 C 95Sn/5Ag has a melting range of 221 - 240 C Hope that helps you out...
Industry News | 2003-06-24 08:14:51.0
R/flex� 3850 laminate is produced in a range of copper and LCP thicknesses, just as the single-clad laminate, and is available in standard panel formats.
Industry News | 2018-04-09 19:48:04.0
SMTA Europe announces Session 1 Technical Program on Predicting Component Life at the “Electronics in Harsh Environments Conference” to be held in Amsterdam, Netherlands, on April 25th, 2018.
Parts & Supplies | Pick and Place/Feeders
SMT basic process components include: silk screen (or dispensing), placement (curing), reflow soldering, cleaning, testing, repair 1, silk screen: its role is to paste or patch solder paste printed on the PCB pad, the components f
Technical Library | 2019-05-24 09:22:59.0
There is a smaller process window and a much narrower margin of error when creating and using lead-free reflow profiles for surface mount parts on printed circuit boards (PCBs). Solder balls, dewetting, tombstones, voids, and head-on-pillow problems will occur much more frequently because lead-free alloys behave differently than eutectic pastes. Problems are compounded due to the extra heat necessary for some lead-free pastes to reach their melting points.
Technical Library | 2022-10-31 17:25:37.0
Mixed formulation solder alloys refer to specific combinations of Sn-37Pb and SAC305 (96.5Sn–3.0Ag–0.5Cu). They present a solution for the interim period before Pb-free electronic assemblies are universally accepted. In this work, the surfaces of mixed formulation solder alloys have been studied by in situ and real-time Auger electron spectroscopy as a function of temperature as the alloys are raised above the melting point. With increasing temperature, there is a growing fraction of low-level, bulk contaminants that segregate to the alloy surfaces. In particular, the amount of surface C is nearly _50–60 at. % C at the melting point. The segregating impurities inhibit solderability by providing a blocking layer to reaction between the alloy and substrate. A similar phenomenon has been observed over a wide range of (SAC and non-SAC) alloys synthesized by a variety of techniques. That solder alloy surfaces at melting have a radically different composition from the bulk uncovers a key variable that helps to explain the wide variability in contact angles reported in previous studies of wetting and adhesion. VC 2011 American Vacuum Society. [DOI: 10.1116/1.3584821]
Link: https://www.ascen.ltd/Products/mask_making_machine/ automation medical face mask machine with inner loop welding is automatic from material feeding to mask collection 1.high automation with PLC, photoelectric detection for the raw material feed
Lyra Reflow Oven is a soft soldering that realizes the mechanical and electrical connection between the solder ends of surface mount components or the pins and the printed board pads by remelting the solder paste pre-distributed on the printed board
Events Calendar | Thu Oct 21 00:00:00 EDT 2021 - Thu Oct 21 00:00:00 EDT 2021 | ,
Great Lakes Chapter Webinar: Low Melting Alloy & Selection of the Right Chemistry for Reliability
Events Calendar | Mon Apr 23 00:00:00 EDT 2018 - Thu Apr 26 00:00:00 EDT 2018 | Shanghai, China
SMTA China East Conference 2018
SMTnet Express, July 1, 2015, Subscribers: 22,969, Members: Companies: 14,445, Users: 38,464 Reliability Screening of Lower Melting Point Pb-Free Alloys Containing Bi Joseph M. Juarez, Michael Robinson, Joel Heebink; Honeywell International
Influence of Nanoparticles, Low Melting Point (LMP) Fillers, and Conducting Polymers on Electrical, Mechanical, and Reliability Performance of Micro-Filled Conducting Adhesives for Z-Axis Interconnections. Influence of Nanoparticles, Low Melting
| https://www.eptac.com/do-you-know-all-of-the-applications-for-soldering/
. Different Types of Soldering Soft Soldering (90 °C – 450 °C) [194 o F – 842 o F] This process uses the lowest filler metal melting point of all of the soldering types
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/dage/test-types-2020/creep-test
. As a rule of thumb, creep is important for temperatures above half the materials absolute melting point. For solder room, temperature (20°C = 293K