Electronics Forum | Tue Jul 25 13:40:04 EDT 2017 | davegoad
I have some CERSOT-23 transistor packages with castellated terminals. The 4th lead (drain castellation) is electrically connected to the top of the device by the castellation. The castellation goes up the ceramic body and contacts the metal package
Electronics Forum | Tue Jul 25 14:30:04 EDT 2017 | emeto
Looks like you have a great wetting of your paste :). Once body has been in contact with molten solder, the package could suffer damages on the body(outside and inside) and on the circuitry inside. It is considered a defect. I have seen that before a
Used SMT Equipment | Soldering - Reflow
The latest breakthroughs associated with the Mark 5 reflow system now provide you with an even lower cost-of-ownership. Heller's new heating and cooling advances deliver up to 40% reduction in nitrogen and electrical consumption. This makes the MK 5
Industry News | 2016-06-22 15:33:28.0
Based on its recent analysis of the surface mount technology (SMT) reflow soldering equipment market, Frost & Sullivan recognizes Heller Industries, Inc. with the 2016 Global Frost & Sullivan Award for Growth Excellence Leadership. Heller Industries has made remarkable improvements to its product and technology portfolios over the last 10 years to emerge a top participant in the SMT reflow soldering equipment market.
Industry News | 2023-04-11 09:52:04.0
MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems at SMTconnect, scheduled to take place May 9-11, 2023 in Nuremberg, Germany. The company will showcase a total of five (5) Inspection Systems specifically designed to address the full spectrum of inspection requirements associated with the electronics manufacturing industry in Hall 4A, Stand 128.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2012-10-18 21:58:51.0
First published in the 2012 IPC APEX EXPO technical conference proceedings. In this paper, we report on a comprehensive study regarding the morphology evolution and voiding of SnAgCu solder joints on the central pad of two different packages – QFN and an Agilent package called TOPS – on PCBs with a Ni/Au surface finish.
The PCB Footprint Expert is a powerful CAD library development tool powered by our own proprietary CAD LEAP Technology (Libraries Enhanced with Automated Preferences). It is packed with very powerful advanced library management features that cuts foo
Sono-Tek's Selective Fluxing Systems provide excellent fine-line control and through-hole penetration for maximizing top-side fill. Compatible with all fluxes, our non-clogging ultrasonic nozzle technology is known worldwide as the industry standard
Events Calendar | Tue Jun 13 00:00:00 EDT 2017 - Tue Jun 13 00:00:00 EDT 2017 | Rolling Meadows, Illinois USA
Webinar Class III -The Deadly Sins of SMT Assembly
Back to Top Questions or comments? Contact us © 1995-99 SMTnet
Back to Top Questions or comments? Contact us © 1995-99 SMTnet
Whizz Systems | https://www.whizzsystems.com/industries/
. The overall performance of any system depends on the characteristics of the analog signal ASIC design and substantially on the peripherals to this ASIC
. Built on a foundation of over 30 years of experience in buying and selling used hi-tech assembly & test equipment. While we’ve evolved considerably over the years, our core mission has remained the same
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
