Industry Directory | Manufacturer
PCB Repairs of all kinds including-Solder on Tab (Solder Removal, Gold Plating), PTH & Delam repairs, etc.
Industry Directory | Consultant / Service Provider / Manufacturer
Providing production and prototype, SEC offers advanced technologies like LED thermal management, heavy copper, PTFE for RFMW, open and internal cavities and blind and buried vias that are certified to a diverse set of industries.
Precision Dispensing System for Heated Dispense Applications The GPD Global MAX II is a compact; high-accuracy system designed for today’s advanced heated dispensing applications. The frame is molded from “liquid rock” which gives the system a stabl
If you have only Gerber data files to work with then ProntoGERBER-CONNECTION can help you! ProntoGERBER-CONNECTION imports raw Gerber data and allows the user to add intelligent information to the shapes on the display and create process assembly
Electronics Forum | Wed May 19 11:50:32 EDT 1999 | Chris Nuttall
We care currently running into problems during our plug via process: At the moment we plug prior to soldermask (LPISM) using epoxy resin - plugging takes place from the component side - however we are seeing solderballs after solder level.This is cau
Electronics Forum | Wed May 19 13:13:20 EDT 1999 | Dave F
| We care currently running into problems during our plug via process: | At the moment we plug prior to soldermask (LPISM) using epoxy resin - plugging takes place from the component side - however we are seeing solderballs after solder level.This is
Used SMT Equipment | X-Ray Inspection
• Nordson DAGE VR950 new technology, open, transmissive X-ray tube: -All voltages can reach <0.95 micron feature resolution – The highest voltage is 160KV, target power: 3W -Long service life of filament components -Automatic st
Used SMT Equipment | AOI / Automated Optical Inspection
Hello and thank you for your interest in our MVP Machine Vision Products AOI Machines For Sale. We have a total of (4) MVP Automated Optical Inspection Machines and (2) Inspection Repair Stations.. They were taken off line due to company closer. All
Industry News | 2011-01-12 17:48:44.0
GPD Global will highlight its Positive Cavity Displacement (PCD) Dispensing in Booth #6111 at the upcoming Automation and Technology West Expo (ATX), scheduled to take place February 8-10, 2011 at the Anaheim Convention Center in Anaheim, CA.
Industry News | 2011-02-04 01:47:14.0
GPD Global will highlight its Positive Cavity Displacement (PCD) Dispensing at the upcoming SMTA Dallas Expo & Tech Forum, scheduled to take place Tuesday, March 1, 2011 at the Richardson Civic Center in Richardson, TX.
Parts & Supplies | Pick and Place/Feeders
JUKI Mounter Chain Introduction (1) JUKI Mounter towline shape like a tank chain, composed of a number of unit links, links between the rotation freely. (2) the same series of towline within the high, high, the same pitch, towline width, bending ra
Parts & Supplies | Pick and Place/Feeders
03090055S01 Pulse counter CUB7CCS0 8-digit 03090079-01 cover fan protective grid 03090149-01 PCB Power adjust HCS II cpl. 03090669-01 replacement pin, multiframe splice 2,5mm 03090670-01 replacement pin, multiframe splice 2,0mm 03090712-01 Stop-
Technical Library | 2020-12-07 15:26:06.0
Temperature cycling testing is a method of accelerated life testing done to PCCs that are exposed to normal operation temperature variations over its lifetime. During the testing, intermittent "open" failures can first occur at the hot and cold extremes of the test, exposing weaknesses in the design and assembly. A poor/weak solder joint fatigues, a via trace or barrel cracks, loose connections or a component fails all causing an intermittent open. When not at extreme temperatures, the PCC assembly relaxes, the "open" closes creating electrical connectivity. If you are monitoring the PCC under test in-situ you will know that an intermittent failure has occurred, and the test could be stopped for inspection. If in-situ monitoring was not implemented, you would not know if there were intermittent failures or not. The PCC gets powered up and works fine at room temperature.
Technical Library | 2019-10-10 00:26:28.0
Voids are a plague to our electronics and must be eliminated! Over the last few years we have studied voiding in solder joints and published three technical papers on methods to "Fill the Void." This paper is part four of this series. The focus of this work is to mitigate voids for via in pad circuit board designs. Via holes in Quad Flat No-Lead (QFN) thermal pads create voiding issues. Gasses can come out of via holes and rise into the solder joint creating voids. Solder can also flow down into the via holes creating gaps in the solder joint. One method of preventing this is via plugging. Via holes can be plugged, capped, or left open. These via plugging options were compared and contrasted to each other with respect to voiding. Another method of minimizing voiding is through solder paste stencil design. Solder paste can be printed around the via holes with gas escape routes. This prevents gasses from via holes from being trapped in the solder joint. Several stencil designs were tested and voiding performance compared and contrasted. In many cases voiding will be reduced only if a combination of mitigation strategies are used. Recommendations for combinations of via hole plugging and stencil design are given. The aim of this paper is to help the reader to "Fill the Void."
Precision Dispensing System for Heated Dispense Applications The GPD Global MAX II is a compact; high-accuracy system designed for today’s advanced heated dispensing applications. The frame is molded from “liquid rock” which gives the system a stabl
www.unisoft-cim.com/pcbplace.htm - The ProntoPLACE module from Unisoft is used by electronics manufacturers to generate the necessary programs for automatic PCB assembly machines in minutes. ProntoPLACE programs most popular surface mount (SMT) place
Training Courses | | | IPC-6012 Specialist (CIS)
The Certified IPC-6012 Specialist (CIS) training covers design, fabrication and inspection of rigid printed boards.
Training Courses | | | IPC-6012 Trainer (CIT)
The Certified IPC-6012 Trainer (CIT) courses recognize individuals as qualified trainers in the area of design, fabrication and inspection of rigid printed boards and prepare them to deliver Certified IPC-6012 Specialist (CIS) training.
Events Calendar | Thu Aug 22 00:00:00 EDT 2024 - Thu Aug 22 00:00:00 EDT 2024 | Prior Lake, Minnesota USA
Upper Midwest Chapter: 33rd Annual Golf Tournament
Events Calendar | Wed Jun 12 00:00:00 EDT 2024 - Wed Jun 12 00:00:00 EDT 2024 | ,
SMTA Webinar: Translating the Technology, a "Cross-Over" Event - Ultra HDI
Career Center | San Jose, California USA | Management
DCSI is one of the most trusted and respected global executive search and solutions companies inthe electronics manufacturing industries. We have more than 35 active openings that range from Managers, Directors, Sr. Directors, Vice Presidents, to EV
Career Center | Valley View, Ohio USA | Production
Machine operator to operate an automated through hole and Surface Mount Technology (SMT) industrial soldering machines. Operator should have 1 year hands on experience operating the Universal (Sanyo) GSM Platform Machine. Must be proficient en
Career Center | ELLENWOOD, Georgia USA | Production,Quality Control,Research and Development,Technical Support
SMT MACHINE OPERATION, FORKLIFT CERTIFY, SUPERVISION OF MANUFACTURING AND PRODUCTION, QUALITY CONTROL TECH., AUDIO ENGINEER SKILLS,,SET-UP OF MUSICIAL THEMES AND PLAYS.
Career Center | , | 2013-01-31 04:29:34.0
• Programming of AOI, SPI and Routing m/c’s. • SMT(Surface Mount Technology) • Basic Electronics • Semi Conductors • Operating System: Windows- 98/XP/Vista/7 • MS Office: 2003/2007/2010
SMT Express, Volume 2, Issue No. 3 - from SMTnet.com Volume 2, Issue No. 3 Thursday, March 16, 2000 Featured Article Return to Front Page Stencil Design for Mixed Technology Through-hole / SMT Placement and Reflow by William E. Coleman, Photo
SMTnet Express, May 12, 2022, Subscribers: 25,588, Companies: 11,569, Users: 27,213 Electronics Manufacturing Technical Articles Filling of Microvias and Through Holes by Electrolytic Copper Plating –Current Status and Future
Qinyi Electronics Co.,Ltd | https://www.qy-smt.com/shop/300mm-squeegee-blade-with-hole-141510?page=297&order=name+desc
DEK SQUEEGEE BLADE (with hole) 300mm | QYSMT × Home about Us FAQ SMT spare parts SMT surplus equipment SMT peripheral equipments News Contact US 0 0 Sign in contact us Products SQUEEGEE BLADE (with hole
| https://www.eptac.com/soldertip/soldertips-avoiding-the-creation-of-splices-via-wire-twisting/
SolderTips: Avoiding the Creation of Splices Via Wire Twisting - EPTAC - Train. Work Smarter. Succeed Looking for solder training standards, manuals, kits, and more