Industry Directory | Consultant / Service Provider / Distributor / Manufacturer
For over 70 years, A&A Coatings has provided thermal spray coatings and applications to a long list of satisfied customers from wide range of industries.
Industry Directory | Manufacturer's Representative
Richfruits Finishing is a leading manufacturer provides products and solutions for the surface finishing of various materials such as wood, glass, and fibre cement.
Count On Tools now offers repair services for MYDATA Agilis Feeders. This program will be available for the 3.7, 4.0, 4.7, and 5.4 Agilis feeders. This is the only repair option for these feeders on the market and provides significant costs savings o
Introducing the ezCLIP universal stop clip for PCB magazine racks. The ezCLIP system was created to allow electronics manufacturers who manually load/unload PCB magazine racks a simple way to distinguish required spacing between boards and to prevent
Electronics Forum | Wed Jan 21 16:55:22 EST 2004 | patrickbruneel
Hi, Are you testing bare boards or soldered boards. Are the test probes in contact with soldered pads or contacting the copper with the osp coating (not soldered). If you could clarify this it would be easier to give some hints for probable causes.
Electronics Forum | Wed Jan 21 17:43:04 EST 2004 | Kris
Hi, I had the same question. In our case we are contacting the copper with the osp coating (not soldered). any published reports that we can reference Thanks
Used SMT Equipment | In-Circuit Testers
FSM-60S Fusion Splicer Kit (with cleaver) - The FSM60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the
Used SMT Equipment | In-Circuit Testers
Fujikura FSM-60S FSM-60S Fusion Splicer Kit (with cleaver) - The FSM60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable
Industry News | 2017-01-26 19:53:00.0
GPD Global will exhibit in Booth 2933 at the upcoming IPC APEX EXPO 2017 scheduled to take place February14-16, San Diego Convention Center. GPD Global will officially launch its new, fully automated dispense platform, Hyperion, and a new, low cost conformal coating system.
Industry News | 2018-04-16 20:18:35.0
SMTA Europe announces Session 5 Technical Program on Adhesives and Coatings at the “Electronics in Harsh Environments Conference” to be held in Amsterdam, Netherlands, on April 25th, 2018.
Parts & Supplies | SMT Equipment
The AEC series is an ideal standard aluminum electrolytic capacitors in a broad range of consumer, industrial and automotive electronics applications requiring extend life , extended temperature range , and low profile . The ROHS-compliant series c
Parts & Supplies | SMT Equipment
The AEC series is an ideal standard aluminum electrolytic capacitors in a broad range of consumer, industrial and automotive electronics applications requiring extend life , extended temperature range , and low profile . The ROHS-compliant series c
Technical Library | 2020-09-02 14:34:23.0
Atomic layer deposition (ALD) is a process of creating coatings on a molecular layer by layer basis. Using an iterated sequence of self-saturating deposition cycles that are self-terminating, a single layer can be deposited at a time, allowing for highly uniform films with complete conformality. The composition of the film typically used for coating printed wiring boards (PWBs) is a high alumina (Al2O3) sequential deposition of alumina and titania capped with a corrosion protective titanium aluminate layer, most notably ALD-Cap from Sundew Technologies, LLC. Rework is a process of restoring an electronics assembly to full functionality to prolong equipment life and reduce the amount of scrap. The process typically involves:
Technical Library | 2023-12-06 03:28:49.0
Mastering Precision: I.C.T's SMT Conformal Coating Valves Introduction Of SMT Conformal Coating Valves: In various industries, including electronics, lighting, energy, and life sciences, the SMT conformal coating process plays a critical role. Precision is key, and the choice of a SMT coating valve significantly influences application quality. This article explores I.C.T's SMT conformal coating valves, focusing on the C-0101, C-L101, PJ-01, PJ-01 (with plastic bucket), C-0100, D-0100, D-0300, and the W Series. C-0101 Water Curtain Spray SMT Conformal Coating Valves: The C-0101, a non-atomizing water curtain spray valve, excels with low-viscosity solvent materials. It ensures clean and precise edges in applications like conformal coatings, UV adhesives, backfilling, and volatile substances. C-L101 Rotary Water Curtain Spray Valve: Similar to the C-0101, the C-L101 suits low-viscosity solvent materials, offering a precise edge without splashing for various coatings. PJ-01 Injection Valve (Without Plastic Bucket): Designed for high-precision applications in electronics, lighting, energy, and life sciences, the PJ-01 excels in accurate dispensing and coating. It accommodates various materials, including red glue, liquids, and pastes. PJ-01 Injection Valve (With Plastic Bucket 30CC): The PJ-01, with a 30cc plastic bucket, maintains high precision for complex circuit board applications, offering precise dispensing for materials like red glue, liquids, and pastes. C-0100 Non-Rotating Film Valve: Different from pneumatic atomizing valves, the C-0100 provides precise edge definition without air pressure involvement. It addresses issues related to atomizing drift and fast-drying adhesives, allowing control over the film width. D-0100 Precision Valve: The D-0100, with a unique fluid-sealing structure driven by compressed air, minimizes seal replacement frequency. Suitable for various fluid dispensing, it handles UV adhesives, encapsulating materials, silicones, epoxies, and surface coatings. D-0300 Dispensing Valve: Tailored for precision fluid dispensing at low driving pressure, the D-0300 accommodates a range of materials, including acrylics, silicones, epoxies, and UV adhesives. It's ideal for applications where accuracy and consistency are crucial. W Series: Needle Design Atomization Valves: The W Series offers needle design valves leaving zero residue. Easy to clean without disassembly, they provide adjustable fluid and air pressure for various coating materials, ensuring excellent atomization effects. Analyzing The Options: When selecting a conformal coating valve, consider specific application requirements. C-0101 and C-L101 suit low-viscosity solvent materials, providing clean and precise edges. PJ-01, with or without a plastic bucket, offers high-precision dispensing for complex applications. C-0100 and D-0100 are versatile for various materials, and D-0300 excels in precision dispensing. The W Series offers residue-free needle design atomization valves. Choose based on material, precision, and coating needs. Integration with I.C.T's Conformal Coating Machines: Integral to I.C.T's Conformal Coating machines, these valves enable precise application tailored to specific requirements. Machines like I.C.T-T550, I.C.T-T550U, I.C.T-T600, and I.C.T-T650 come equipped with a range of valve options catering to diverse production line needs. I.C.T SMT Coating Machine.png Conclusion: Selecting the right conformal coating valve is crucial for consistent, high-quality results. Evaluate options based on material, precision, and coating requirements. I.C.T provides tailored solutions for electronic assembly needs. For detailed insights into coating and dispensing machines, follow the provided link. Professional engineers are ready to assist in designing a production line that perfectly matches your requirements, ensuring optimal performance. Contact us for more information and tailored solutions to elevate your conformal coating processes.
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity principle. PCD technolog
http://www.gpd-global.com No drip no drool across a wide range of fluid viscosities (low-to-mid and low-to-high). No manual adjustment to compensate for pump variability. Truly Volumetric PCD Pumps for total control of dispensing fluids. Ability to
Events Calendar | Tue Oct 15 00:00:00 EDT 2024 - Thu Oct 17 00:00:00 EDT 2024 | ,
GfKOOR Series | Seminar Application and Utilisation of Protective Coatings for Electronic Assemblies
Events Calendar | Wed Apr 20 00:00:00 EDT 2022 - Wed Apr 20 00:00:00 EDT 2022 | ,
Virtual Course: Selection Criteria of Surface Finish for Next Generation PCB Technologies
Career Center | , | Engineering,Research and Development,Technical Support
For over 50 years, Emerson & Cuming has been designing and manufacturing high performance encapsulants, adhesives, and coatings for the automotive, telecommunications and electronic industries. Our expansive breadth of technologies combined with our
Career Center | Brookfield, Wisconsin USA | Engineering
ELECTRONICS MANUFACTURING ENGINEER Salary $50 to 65k Company: Our client is a manufacturer of electronic controls used in a wide variety of industrial and consumer uses. This organization has seen some very strong growth lately, sales have double
Career Center | , California | Quality Control
Tammy T Vo P.O. Box 2213 (714) 254-5073 E-mail: nhutamvo@yahoo.com Position of Interest Senior Quality Inspector Aerospace Manufacturing. / Electronic PCBA/Advanced coating technologies Profile of Qualifications 12 years of experience wo
| https://www.eptac.com/soldertips/solder-paste-shelf-life-and-testing/
Solder Paste Shelf Life and Testing | EPTAC Skip to content Scroll Toll Free: 800.643.7822 Toggle navigation Training All Classes
| http://etasmt.com/cc?ID=te_news_industry,26565&url=_print
New 0402 Long-Life Ceramic Nozzle-SMT Technical-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Reflow oven,SMT Reflow Soldering Oven 当前位置: Home >> News