Electronics Forum | Fri Jun 01 01:07:13 EDT 2001 | Brian Sloth Bentzen
I would be very interested in informations on OSP (organic solderability protection) on PCB�s. Good or bad experience with solderability, storage etc. There must be different types / brands of OSP. What type should be prefered ? And if possible
Electronics Forum | Wed Oct 06 04:11:35 EDT 2010 | grahamcooper22
I've done minimal research to this point and > understand my issue with solder on the double > sided boards is due to oxidation that occures on > the unpopulated pads when the board makes its > first trip through the reflow oven. > > We did run
Industry News | 2018-10-18 08:55:30.0
Nitrogen Protection Reflow Oven
Surface Mount Technology Association (SMTA) | https://www.smta.org/education/presentations/presentations.cfm
. Three surface finishes including OSP, ImAg, and ENIG are considered. The test vehicle consists of 15mm and 6mm Ball Grid Array (BGA) components. The assembled test boards were isothermally aged at 125oC for 12 months, which are then thermally cycled between -40oC to
| http://www.thebranfordgroup.com/dnn3/Auction/TSLE0523.aspx
. Sn - Osp manual electroplating w/post-cleaning + dryer Laif Cu & Tn Pattern Plate Electroplating Line PVA Tepla Plasma-Etch System Hot Air Levelling Laif HASL Pre-Clean Line Cemco Quicksilver Hot Air Leveller lead free Pola e Massa HASL post-cleaning Artwork
