Industry Directory | Manufacturer
Maximart has 27-year-experience of manufacturing vertical machining center, EDM machine, precision lathe, 5 axes machining center and milling machine. Please take time to visit our website.
Versatile reflow oven for medium volume soldering (leadfree or leaded solder). 400 mm process width. Integrated microprocessor for profile control and storage. Extra high air volume for perfect soldering of complex boards. 5 zone reflow oven 400
New Equipment | Test Equipment
Kingsine K3063 USD $32,000.00 10 output channels Protection Relay Test Set K3063 8-channel output: 3x30A /4x 130V/Aux. DC High power:3X450VA at 30A (current generator). 4 x 60VA at 0 ... 130 V (voltage generator) High Prec
Electronics Forum | Fri Aug 11 14:05:43 EDT 2006 | mpm fan
Ahhhh. If it only screwed up "consistantly" it would be alot easier!! yeah, bad board or overheat in the card rack (filters), kinked wire? good luck, my guess is it'll get more consistant as days pass
Electronics Forum | Thu Mar 01 11:47:20 EST 2007 | Wagoner
Run the lead free BGA side first. Then run the tin lead side second. We do this on some boards so that we don't overheat the components on the second side. There is no reason that the lead free solder needs to reflow on the second pass.
Used SMT Equipment | Soldering - Wave
Operating System: Windows based Details: • Dual pot-Lead and Lead Free • Includes full pot of Lead Free –SN100C solder and Lead SN63/PB37 solder • Carbon Steel Solder pots with high temperature protective coating • A
Used SMT Equipment | Labeling Systems
1. This product is made of imported stainless steel materials from Japan and is enclosed with the original Nano insulation materials from the United States. 2. This product has an extremely long service life. The general time is three to five years
Industry News | 2021-08-12 20:58:16.0
When we use the Refrigeration Compressors, there could be frosting. It's a failure that we can solve. So this article will take you to look at the reasons for frosting and the corresponding solutions.
Industry News | 2021-08-29 21:11:45.0
A compressor is a kind of driven fluid machinery that elevates low-pressure gas to high pressure. It is the heart of the refrigeration system. It inhales refrigerant gas with low temperature and low pressure from the suction pipe, compresses the piston driven by the motor, and then emits refrigerant gas with high temperature and high pressure to the exhaust pipe to provide power for the refrigeration cycle.
Parts & Supplies | Soldering - Wave
Overseas Agent and Distributor Wanted ! Features : Spray Fiuxer: 1) Oriental motor drives the flux spraying system. Spraying speed is adjusted according to PCB board width and moving speed to ensure even spraying all time. 2) Durable “Meiji
Technical Library | 1999-05-06 11:42:16.0
The most reliable and well-designed electronic device can malfunction or fail if it overheats. Considering thermal issues early in the design process results in a thermally conscious system layout and minimizes costs through the use of passive cooling and off-the-shelf components. When thermal issues are left until completion of the design, the only remaining solution may be a costly custom heat sink that requires all the space available. Incorporating a heat sink or a fan into a product after it is fully developed can be expensive, and still may not provide sufficient cooling of the device.
Technical Library | 2022-09-29 14:08:42.0
Electronic vehicles, devices and components must not overheat, otherwise they may fail to operate correctly. Thermal management is a major technical challenge as components are getting smaller, power densities are increasing and demands on robustness and reliability are becoming more stringent. To prevent power losses or defects resulting from overheating, liquid thermal interface materials (TIMs) are being increasingly used to dissipate their heat. This White Paper discusses the aspects that need to be taken into account when dispensing these mostly highly viscous, highly abrasive materials and why in many cases they are better alternatives to pads, tapes and foils.
Hot Bar Soldering/Bonding Machine
| http://etasmt.com/cc?ID=te_news_bulletin,25761&url=_print
. 10.The builtin UPS and automatic delay shutdown system guarantee return welder in power or overheat do not damaged PCB and the machine
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/asymtek/about-us/events/imaps-device-packaging-2016
. Without a thermal interface, the die will overheat and the components will not function properly. Advanced microelectronics packaging demands high and dynamic standards of its supplier industries in relation to speed, precision and flexibility
