Industry Directory | Manufacturer
Master Bond is a leading manufacturer of epoxy adhesives, sealants, coatings, potting and encapsulation compounds. Master Bond specializes in epoxies, silicones and uv curable polymer systems.
Industry Directory | Manufacturer's Representative
AlSi BondPads for PCB and Hybrid Packaging modules
New Equipment | Curing Equipment
A Pressure Cure Oven (PCO), or Autoclave, is used to minimize voiding and increase adhesion strength for bonding processes typically used in die attach and underfill applications. PCO pressurizes air into a rigid vessel and heats & cools with
We are well versed in the following thermal application materials: Sil-Pad thermally conductive insulators Gap-Pad thermally conductive gap filling material Q-Pad thermal grease replacement film Bond-Ply thermally conductive adh
Electronics Forum | Fri Sep 02 09:02:10 EDT 2005 | dougs
you tell me, the customer has started to pull at some of the leads of some IC's with tweezers while de-bugging boards that had failed in the field, he was able to pull some of the leads away from the solder joints, we feel he may be over-doing it a
Electronics Forum | Wed Sep 07 10:41:24 EDT 2005 | D.B. Cooper
We've seen the same thing - leads of QFPs not as strong as we'd like them to be. In the past 4 years no problem, this Spring they start failing. Touch a solder iron to it and it solders fine. After crunching some data, we found that both QFPs fail
Used SMT Equipment | In-Circuit Testers
Rohde & Schwarz FSH18 Handheld Spectrum Analyzer 10MHz - 18GHz Handheld Spectrum Analyzer 10MHz - 18GHz, RBW 100Hz - 1MHz, LCD color display The R&S FSH18 is the perfect handheld tool in the field for many different applications such as servi
Used SMT Equipment | In-Circuit Testers
Rohde & Schwarz FSH18 Handheld Spectrum Analyzer 10MHz - 18GHz Handheld Spectrum Analyzer 10MHz - 18GHz, RBW 100Hz - 1MHz, LCD color display The R&S FSH18 is the perfect handheld tool in the field for many different applications such as servi
Industry News | 2003-02-24 09:32:24.0
Now available with an easy-to-use dispensing gun, Electrolube TCR is a single-component, highly thermally conductive RTV sealant.
Industry News | 2003-07-02 08:54:26.0
A novel unreinforced, thermally conductive, pressure sensitive adhesive tape delivers very high bond strength to low-energy surfaces.
Parts & Supplies | Pick and Place/Feeders
The definition of SMT SMT is the surface assembly technology,surface mount technology(surface mount technology)(Surface Mounted Technology abbreviation),is currently the most popular electronic assembly industry,a technology and technology. What a
Parts & Supplies | Pick and Place/Feeders
SMT basic process components include: silk screen (or dispensing), placement (curing), reflow soldering, cleaning, testing, repair 1, silk screen: its role is to paste or patch solder paste printed on the PCB pad, the components f
Technical Library | 2021-12-29 19:37:20.0
The purpose of this study was to compare the strength of the bond between resin and glass cloth for various composites (laminates) and its dependence on utilized soldering pad surface finishes. Moreover, the impact of surface finish application on the thermomechanical properties of the composites was evaluated. Three different laminates with various thermal endurances were included in the study. Soldering pads were covered with OSP and HASL surface finishes. The strength of the cohesion of the resin upper layer was examined utilizing a newly established method designed for pulling tests.
Technical Library | 2024-06-23 22:03:59.0
The melting temperatures of most lead-free solder alloys are somewhat higher than that of eutectic Sn/Pb solder, and many of the alloys tend to wet typical contact pads less readily. This tends to narrow down the fluxing and mass reflow process windows for assembly onto typical organic substrates and may enhance requirements on placement accuracy. Flip chip assembly here poses some unique challenges. The small dimensions provide for particular sensitivities to wetting and solder joint collapse, and underfilling does not reduce the demands on the intermetallic bond strength. Rather, the need to underfill lead to additional concerns in terms of underfill process control and reliability. Relatively little can here be learned from work on regular SMT components, BGAs or CSPs.
General curing, die attach curing, underfill curing, film & tape bonding, wafer laminating.
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
Training Courses | | | IPC-7711/7721 Specialist (CIS)
The Certified IPC-7711/7721 Specialist (CIS) training focuses on rework of electronic assemblies and repair and modification of printed boards and electronic assemblies.
Training Courses | | | IPC-7711/7721 Trainer (CIT)
The Certified IPC-7711/7721 Trainer (CIT) courses recognize individuals as qualified trainers in the area of rework and repair of printed boards and electronic assemblies and prepares them to deliver Certified IPC-7711/7721 (CIS) training.
Events Calendar | Mon Apr 23 00:00:00 EDT 2018 - Thu Apr 26 00:00:00 EDT 2018 | Shanghai, China
SMTA China East Conference 2018
Events Calendar | Tue Mar 23 00:00:00 EDT 2021 - Thu Mar 25 00:00:00 EDT 2021 | Novi, Michigan USA
Adhesives & Bonding Expo
Career Center | , Maryland USA | Engineering
Late stage start-up company, well into commercialization, that develops and manufactures products to precisely control the instantaneous release of heat energy for reaction initiation and joining applications. Building from its strengths in material
Career Center | san diego,, California USA | Engineering,Production,Quality Control,Technical Support
SMT Process Engineer, ISO-9001, IPC-600/610/620/7711/7721, J-STD-001, Thermal profiling, Lean manufacturing.
Career Center | Bangalore, India | Engineering,Maintenance,Production,Technical Support
SMT Stencil designing & Knowledge of full SMT process software known CAD/CAM -circuit CAM Pro 7.3,GC Power station, GCCAM Edit,Auto CAD, Fault finding of Electronic Boards & Servicing electronic machines.
SMT Express, Volume 2, Issue No. 9 - from SMTnet.com Volume 2, Issue No. 9 Thursday, September 14, 2000 Featured Article Return to Front Page Book Review Reviewed by Dave Fish (davef ), Pandion Electronics, Inc Title: Wire Bonding
ORION Industries | http://orionindustries.com/pdfs/silpad400.pdf
, .007 in. Sil-Pad 400, .009 in Sil-Pad 600 Test Method Color Gray Gray Green Thickness Inches .007 ± .001" .009 ± .001" .009 ± .001" (mm) 0.178 ±0.025 .229 ± .025 .229 ± .025 ASTM D 374 Breaking Strength Lbs/inch
| https://www.eptac.com/faqs/ask-helena-leo/ask/gold-wire-bond-failing-pull-test
? Does it have a Nickel underplate? How thick is the gold plating? I’ve checked Mil-Std-883F method 2011.7 Bond Strength (Destructive Bond Pull Test
.gif)
winsouce.jpg)