Industry Directory | Consultant / Service Provider / Manufacturer
Interflux USA, Inc. Mfg. and Distribution of high quality solders, fluxes and solder paste. Specialized in No-Residue soldering.
Industry Directory | Manufacturer
When you purchase from Avanti you are dealing directly with a US based manufacturer with full in house capabilities and a management staff with over 200 years of combined PCB manufacturing experience.
New Equipment | Solder Materials
Kapp Lunar Flux™ is a white paste for the high temperature soldering of Aluminum and Zinc die cast alloy. It is a reaction-type flux with 70% active ingredients dispersed in alcohol. Kapp Lunar Flux™ has considerable shelf life stability, as the susp
New Equipment | Cleaning Agents
KYZEN® E5615 is an aqueous based cleaner designed to be the fastest drying chemistry in the industry. E5615 is shipped ready to use and successfully removes unreflowed solder paste from stencils and related equipment. Fast Drying No Rinse Require
Electronics Forum | Fri Feb 09 12:31:35 EST 2007 | realchunks
Ask Brain Toleno at "circuitsassembly.com/blog" He's a smart guy and works as team lead at Henkel Loctite. Just don't take him out for drinks.
Electronics Forum | Fri Feb 09 02:30:50 EST 2007 | Muhammad Haris
What are Resins, Solvents, Activators, and Thickening Agents in Solder Paste and what are their helpful and harmful effects? AND What are the purposes/properties and effects of Sn(Tin), Pb(Lead), Ag(Silver), Bi(Bismuth), In(Indium), Cu(Copper), Ni(
Industry News | 2010-07-02 16:00:34.0
In a victory for IPC members and the Canadian electronics industry, the Canadian Department of the Environment, on June 26, 2010, elected not to ban five rosin-containing substances from all products manufactured and sold in Canada.
Technical Library | 2018-11-20 21:33:57.0
There are several industry-accepted methods for determining the reliability of flux residues after assembly. The recommended methods of test sample preparation do not always closely mimic the thermal cycle experienced by an assembly. Therefore, extraction from actual assemblies has become a popular method of process control to assess consistency of post-reflow cleanliness. Every method of post-reflow flux residue characterization will depend on the reflow process followed to prepare the coupon.This investigation will focus on the effect of thermal conditions on the remainder of active ingredients in flux residues after assembly with no-clean solder pastes.
Technical Library | 2020-11-24 23:01:04.0
The miniaturization trend is driving industry to adopting low standoff components or components in cavity. The cost reduction pressure is pushing telecommunication industry to combine assembly of components and electromagnetic shield in one single reflow process. As a result, the flux outgassing/drying is getting very difficult for devices due to poor venting channel. This resulted in insufficiently dried/burnt-off flux residue. For a properly formulated flux, the remaining flux activity posed no issue in a dried flux residue for no-clean process. However, when venting channel is blocked, not only solvents remain, but also activators could not be burnt off. The presence of solvents allows mobility of active ingredients and the associated corrosion, thus poses a major threat to the reliability. In this work, a new halogen-free no-clean SnAgCu solder paste, 33-76-1, has been developed. This solder paste exhibited SIR value above the IPC spec 100 MΩ without any dendrite formation, even with a wet flux residue on the comb pattern. The wet flux residue was caused by covering the comb pattern with 10 mm × 10 mm glass slide during reflow and SIR testing in order to mimic the poorly vented low standoff components. The paste 33-76-1 also showed very good SMT assembly performance, including voiding of QFN and HIP resistance. The wetting ability of paste 33-76-1 was very good under nitrogen. For air reflow, 33-76-1 still matched paste C which is widely accepted by industry for air reflow process. The above good performance on both non-corrosivity with wet flux residue and robust SMT process can only be accomplished through a breakthrough in flux technology.
| http://etasmt.com/cc?ID=te_news_industry,5361&url=_print
° C.The manual welding solder wire: liquid temperature should be lower than the soldering iron operating temperature 345 ° C.Solder paste: The liquidus temperature should be lower than 250
GPD Global | https://www.gpd-global.com/pdf/doc/Dispense-System-Service-Guide-22290008G.pdf
. Date Version Notes 03/30/2022 5.2 New • Conductive paint ingredients added to specifications. • Vent location detail added to MAX Series facility specifications
