Industry Directory | Manufacturer's Representative
Worldclass ERP system with total manufacturing and accounting control for small-med sized companies.
Chipcon designs and markets low power, low cost RF-ICs for numerous wireless short range applications in the 315, 433, 868, 915 MHz and 2.4 GHz SRD bands. Chipcon also provides turnkey mixed-signal ASIC design and manufacturing services.
Product Name MC Power（W） 0.5W,1W Output Voltage(KV) ,0.1,0.125,0.2,0.25,0.3,0.4,0.5,0.6,0.8,1,1.1,1.25,1.5,2, ISO9000:2008 certified precision module .The MC Series is ideal for OEM applications requiring a competitively priced, precision high
Product Name FF Power（W） 7.5W-37.5W Output Voltage(KV) ,7.5V, ISO9000:2008 certified precision module .The FF Series is ideal for OEM applications requiring a competitively priced, precision high voltage module. APPLICATIONS Electron Beam/I
Electronics Forum | Tue Nov 29 11:45:35 EST 2016 | ttheis
I was able to repair the original power supply for the printer again with parts from another similar power supply on ebay. At first the machine didn't power up properly even though the supply voltages were all good on a volt meter when tested befor
Electronics Forum | Mon Mar 23 15:41:46 EST 1998 | Stuart Adams
Should I use thermals or direct connects on vias from BGA pads to power planes. The via is connected to the BGA pad via a short 8mil trace.
Used SMT Equipment | SMT Equipment
Product name: KE - 2060 l JUKI chip mounter Product number: KE - 2060 l JUKI2060 chip mounter parameters: Mounting head: 3 Material stand: 80 Mount speed: 0.25 SEC/CHIP (3 head at the same time put in the attached SMT) Mounting speed:+ / - 0.
Used SMT Equipment | SMT Equipment
1 () cpk>1 Component size: 1005 chip - x W90mm x T25mm L100mm Basic replacement time: 0.9s (the length of the substrate x 240mm) Power supply: three phase 1.7kVA, AC200-400v Air source: 0.49MPa, 150L/m (A.N.R) Device size: W 1260 x D 722mm 2 x H
Industry News | 2003-04-30 08:51:08.0
Electrolube played the role of environmental champion in Australia recently.
Industry News | 2003-01-29 13:23:31.0
A Common Drain Configuration that is 80% Smaller than Devices in the TSSOP-8 Package
Parts & Supplies | SMT Equipment
System control power (160555) DEK system control power 160555 Description: DEK System Control Power SMPSU, 650W WIDE RANGE I / P (FASTON TERMS) (TXT) Part NO.: 160555 Applicable models: ELA / HORIZON / INFINITY、 if need more info about the
Parts & Supplies | SMT Equipment
Track width of the motor power cable(185101) Track width of the motor power cable Part Number: 185101 English name: BOM ^ LOOM ^ MOVING RAIL STEPPER Applicable models: DEK I series printers if need more info about the products , pls don’t he
Technical Library | 2019-05-23 10:42:00.0
Why identify flux residues? The primary purpose of flux is to reduce species of metal oxides from solderable surfaces, and to act as a mechanism for lifting and removing debris. If the assembly is not properly cleaned after manufacturing, flux may continue to reduce metals and may eventually corrode the assembly. When the assembly is powered, the metal ions may precipitate along electromagnetic field lines and form dendritic shorts. In addition, the presence of residue can alter the insulation properties of a board, affect the adhesion of the conformal coating, or interfere with the moving parts of the assembly. In radio frequency (RF) applications, flux may change the RF properties on the surface of the printed circuit board (PCB) such as the dielectric strength, surface resistance, and Q-resonance.
Technical Library | 2021-03-10 23:57:29.0
Latent short circuit failures have been observed during testing of Printed Circuit Boards (PCB) for power distribution of spacecraft of the European Space Agency. Root cause analysis indicates that foreign fibers may have contaminated the PCB laminate. These fibers can provide a pathway for electromigration if they bridge the clearance between nets of different potential in the presence of humidity attracted by the hygroscopic laminate resin. PCB manufacturers report poor yield caused by contamination embedded in laminate. Inspections show ...
03006765-01 Kabel:Versorgung BE-Tisch ext. 03006767-03 Linear-motor Y-axis 03006775-02 Piping DLM2 HF-/X-Sseries 03006778-01 Piping TwinHead HF-/X-series 03006781S02 Portalsystem cpl.HF 03006796-01 BALLAST RESISTOR WITH PLATE 03006808-01 CABLE
1. Intelligent voice automatically reports the number and language reminder, adjustable volume 1--16. 2. The disk material without human intervention, expected tail automatically shut down, without having to press the stop button, automatic materi
Training Courses | | | Other Courses
Other courses related to electronics manufacturing and assembly
ENERGY1 - TECHNICAL CONSULTANT FOR POWER , UTILITIES AND MANUFACTURING
Events Calendar | Tue May 17 00:00:00 EDT 2022 - Thu May 19 00:00:00 EDT 2022 | Amsterdam, Netherlands
Electronics in Harsh Environments Conference and Exhibition
Events Calendar | Tue Sep 08 00:00:00 EDT 2020 - Tue Sep 08 00:00:00 EDT 2020 | ,
Post – Moore's Law Electronics: From Now until Quantum Computing
Career Center | Dallas, Texas USA | Engineering
Skills/Requirements: BSEE required, 7 years experience with Electric power system or Industrial system practices and experience leading technical teams. Duties/Functions: Function as both an Emgineer and Project Manager for short and long term busine
Career Center | Dallas, Texas USA | Engineering
Skills/Requirements: 7 yrs experience with electric power systems, practices and philosophies, project mananagement skills and a working knowledge of protective relay and automation application. Knowledge of load flow and short circuit studies. Duti
Career Center | Pondicherry, India | 2017-04-19 13:31:29.0
Maintenance,Quality Control
Career Center | Shoubra Misr, Cairo, Egypt, Egypt | Engineering,Maintenance,Production,Quality Control
Refer to my CV
| https://www.wesource.com/test-and-measurement-equipment/lecroy-catc-usb-tracer/universal-protocol-analyzer-system-with-usb-analyzer-and-usb-test-generato
LeCroy CATC USB Tracer / Universal Protocol Analyzer System with USB Analyzer and USB Test Generator U-ANA-2A25, 2500, US005MA, US005MG ID_700840 (10/22
KingFei SMT Tech | https://www.smtspare-parts.com/sale-34513198-smt-auto-label-feeder-60mm-100mm-width-short-type-for-siemens-d-machine.html
SMT Auto Label Feeder 60mm 100mm Width Short Type For Siemens D Machine Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
