Industry Directory | Manufacturer
Parker is the global leader in motion and control. Nitrogen generator manufacturer for all soldering applications with purity up to 99.9995%. Every product manufactured in ISO9001 certified facilities.
Industry Directory | Consultant / Service Provider / Manufacturer
At Gas Generation Solutions, we know if you are engaging in selective soldering, reflow, or wave, purity matters—that’s why our nitrogen generators for soldering offer purities of up to 99.9995.
Tank mounted Nitrogen Generator PSA system, for applications from 2 to 375 CFH and Nitrogen purities from 95% to 99.9995%
PSA Nitrogen Gas Generators custom engineered for your N2 flow rate and purity. Compatible with all types and brands of selective soldering, wave soldering, reflow oven equipment. N2 Purities up to 99.999+%. Full turnkey systems with dedicated air
Electronics Forum | Thu Jun 29 17:38:51 EDT 2006 | flipit
I might be wrong since I don't know this piece of equipment but I think ROL might be a better measure. For 63/37 it used to be 20 ppm ROL (residual oxygen level) was about what you needed for a reflow oven. This is to take full advantage of all tha
Electronics Forum | Thu Jun 29 10:45:46 EDT 2006 | stepheniii
We have an ERSA Versaflow Ecoselect selective wave soldering machine. It works well except it needs nitrogen. You can't even move the table around if your nitrogen tank is empty. The spec sheet says Required degree of purity: Nitrogen liquid 5.0
Used SMT Equipment | Soldering - Selective
Sized to work with 1 KISS machine. Flow at 99.999 purity is 58 CFH. 115 volt. Air supplied to the generator must be a minimum of 110 PSI and between 100°F/38°C and 33°F/0.5°C, with a water dew point of 40°F / 5°C or below
Used SMT Equipment | Other Equipment
Domnick Hunter MIDIGAS6-C Nitrogen Gas Generator Flow rate: 113 SCFH of 99.99% purity N2 delivered at 87 psig Includes: buffer vessel, oxygen analyzer & flow verification device Inlet air required: 13 scfm at 115 psig into the generator
Industry News | 2002-05-10 08:10:07.0
During Its Annual Conference this Fall
Industry News | 2013-01-19 07:46:16.0
Information that inspires innovation is center-stage for design, printed boards, electronics assembly, test and printed electronics
Technical Library | 1999-04-29 15:39:03.0
The paper describes the effects of a debridging knife on inerted soldering environments in an Electrovert Econopak wave solder machine. It reviews experiments to improve the purity of the soldering environment and results of the tests.
High Quality Selective Wave Soldering Machine If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included allof our products. wave soldering, wave soldering machine, D
| http://etasmt.com/cc?ID=te_news_industry,4161&url=_print
Lead-free era makes whether need nitrogen in reflow a hot topic . As the lead-free solder flow resistance, wettability is not as good as lead solder, especially when the circuit board pad processed with OSP (organic protective film bare copper), the pad
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/leadfree.pdf
• How well does it work? • What do I have to do differently? • What profile shape, peak temperature, liquidous time? • What atmosphere, air or nitrogen