Industry Directory | Manufacturer
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
.jpg)
Industry Directory | Consultant / Service Provider / Distributor / Manufacturer
SMT XTRA is a global electronics specialist, providing productivity enhancing solutions for the global Surface Mount electronic assembly sector.
Form & Cut 2-, 3-, 4-, 5-, and 7-leaded Radial Components Capable of forming loose radial components at rates up to 5,000 parts per hour with a variable speed motor. Feed components by hand or with tubes (TO-220s) Reduce setup time with quick ch
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
Electronics Forum | Wed Jul 16 14:03:27 EDT 2008 | lharris
Already spoke with Novastar, and they only offer replacement parts for the preheating elements and fingers for this model, which was discontinued in 1997. Thanks though for your reply.
Electronics Forum | Tue Jul 22 13:27:23 EDT 2008 | gkephart
Sure, I've got a bunch of them gathering dust. Just call!
Used SMT Equipment | Soldering - Reflow
Hours – 35941Condition – all features work, recently replaced multiple heaters and fans with new factory parts.Flow – left to rightPower requirements – 480V 100AEdge rail, adjustable rail with chain conveyorMesh belt
Used SMT Equipment | SMT Equipment
1 () cpk>1 Component size: 1005 chip - x W90mm x T25mm L100mm Basic replacement time: 0.9s (the length of the substrate x 240mm) Power supply: three phase 1.7kVA, AC200-400v Air source: 0.49MPa, 150L/m (A.N.R) Device size: W 1260 x D 722mm 2 x H
Industry News | 2013-07-22 09:54:27.0
GPD Global has introduced its new NCM5000 dispense pump for easy jetting. With only two wetted parts and no seals or springs to replace or adjust, field operation is simple.
Industry News | 2016-05-10 14:16:16.0
GPD Global offers individual pumps for integration into your existing platform – the Jetting NCM5000 Pump is one of them. The Jetting NCM5000 Pump simplifies jetting to its basic elements: hammer, pin, and nozzle. Only the pin and nozzle are wetted parts. This means easy set-up, cleaning, and upkeep.
Parts & Supplies | SMT Equipment
MPM DRIVER REPLACEMENT 5 if need more info about SMT spare parts, pls don’t hesitate to contact with us at any time.More info pls visit our website:www.ksunsmt.com. Email: alice@ksunsmt.com Skype: alice@ksunsmt.com Whats app: +86 1317047
Parts & Supplies | SMT Equipment
MPM DRIVER REPLACEMENT if need more info about the products , pls don’t hesitate to contact with us at any time.More info pls visit our website:www.ksunsmt.com. Email: alice@ksunsmt.com Skype: alice@ksunsmt.com Whats app: +86 13170471806
Technical Library | 2021-09-02 08:17:07.0
We are a professional manufacturer of PCB depaneling machines, which is workable for all boards, including flex and regid boards, v-scored boards and routed boards. Laser pcb depaneling is non-contact way without mechanical stress,this solution is good for modern precision PCB depaneling. It has below advantages: 1. No dust The production environment of the circuit board industry is carried out in the dust-free workshop. The traditional pcb depaneling equipment, such as blade moving type machine, will inevitably produce residues and micro powder, which will pollute the 10000 and 1000 class dust-free workshops and affect the conductivity of products. The UV laser PCB cutting machine is a vaporization processing process, which will not produce dust and is conducive to the conductivity of the product. 2. High cutting precision The processing gap of high-precision traditional processing equipment can not reach the gap width of less than 100 microns, which will cause certain damage to the lines on the edge or PCBA circuit board containing components. The focus spot of the laser cutting machine is small, and the ultraviolet cold processing mode has little thermal impact on the edge of the circuit board. The cutting position accuracy is less than 50 microns, and the cutting size accuracy is less than 30 microns, which will not affect the edge of the circuit board, and the precision is high. 3. No stress Traditional processing methods generally have V-grooves, which will cause certain damage to the board in the manufacturing process. The UV laser PCB cutting machine can directly cut the bare board without making V-grooves. In addition, the traditional processing methods directly use tools to act on the circuit board, especially the stamping method has a great impact on the circuit board, which is easy to cause board deformation. The laser cutting machine is a non-contact processing mode, which acts on the surface of the material through the high-energy beam, which will not cause the influence of stress and the deformation and damage of the circuit board. 4. For special-shaped cutting, it is easy to automate The UV laser PCB cutting machine can cut for any shape without replacing any props and fixtures, and without steel mesh. The same equipment can meet special-shaped and straight-line cutting, which is easy to realize assembly line automatic production and high flexibility. It is easy to improve production efficiency and save production process and production cycle. In particular, it can quickly and efficiently meet the needs of rapid proofing, directly import the drawing, and then locate the cutting. 5. High compatibility The UV laser PCB cutting machine can process the materials around the circuit board, such as PCB, FPC, covering film, pet, reinforcing board, IC, ultra-thin metal cutting, etc. it has strong practicability, is compatible with the processing of a variety of materials, is easy to operate, can be imported into the drawing, does not need to adjust any mechanical parts, and is easy to operate and maintain. 6. Good cutting edge effect The cutting edge is smooth and neat without burr. It can be processed and formed directly according to the size of the drawing, which is conducive to improving the yield of the product. It can be directly installed into the subsequent process without further processing. For more details about UV laser depaneling, please feel free to contact us. www.pcbdepanelingrouter.com
Technical Library | 2024-04-28 18:38:56.0
Table of Contents: Safety // Product/Parts Control and // Replacing Parts.// System Installation .// System Alignment // System Specifications...
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
https://www.ascen.ltd/component_tape_feeder/ SMT vibratory parts feeder bowl use to loading the loose component online, it can connect the SMT mounter for automated online feeding or connect the robot for automatic production for replace the artifi
Training Courses | | | IPC-7711/7721 Trainer (CIT) Recert.
The Certified IPC-7711/7721 Trainer (CIT) recertification courses are intended for those individuals who were previously accredited to provide Certified IPC-7711/7721 Trainer (CIS) training.
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Tue Oct 15 00:00:00 EDT 2024 - Thu Oct 17 00:00:00 EDT 2024 | ,
GfKOOR Series | Seminar Application and Utilisation of Protective Coatings for Electronic Assemblies
Events Calendar | Mon Apr 23 00:00:00 EDT 2018 - Thu Apr 26 00:00:00 EDT 2018 | Shanghai, China
SMTA China East Conference 2018
Career Center | San Diego, California USA | Engineering
Manufacturing Engineer This position requires an individual with solid manufacturing skills that will strive for continuous improvement of existing processes. In this position you will: � Design, develop, document and test electronic hardware for
Career Center | Dallas, Texas USA | Engineering
This opportunity is available in Jackson, MI. This position will include the following: Perform source and parts selection, assist design engineers in BOM, recommend parts solection, generate obsolete parts reports with parts replacement. Interfac
Career Center | Fayetteville, Arkansas USA | Engineering,Production
I enjoyed working in Electronics Manufacturing while in college (BSEE) and would like to pursue an engineering job in a related field.
Career Center | Sullivan, Ohio USA | Engineering,Maintenance,Production,Quality Control,Technical Support
· Develop or upgrade preventative maintenance procedures for components, equipment, parts, or systems. · Quoting of jobs to be competitive with other companies. · Problem solving and communication with operators for quality assurance. Pro
SMT Express, Issue No. 3 - from SMTnet.com Volume 1, Issue No. 3 Wednesday, August 18, 1999 Featured Article Return to Front Page BGA REWORK Earl Moon Proof Of Design (POD) COMPARE PART SQUARENESS TO BOARD'S SILK-SCREEN OR TRACES A part
Criminal Prosecution - Who can be held liable for the sale of counterfeit parts? Criminal Prosecution - Who can be held liable for the sale of counterfeit parts? An inside look at the unscrupulous business practices that plague the open market
| http://www.feedersupplier.com/sale-26466121-siemens-00322224s01-smt-feeder-parts-feeder-belt-spring-replacement-parts.html
Siemens 00322224S01 SMT Feeder Parts Feeder Belt Spring Replacement Parts Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
Heller Industries Inc. | https://hellerindustries.com/requestwarrantyreplacement/
Cracking Intermetallic Growth on PCB Dull solder joints Support Manuals Software Downloads Request Document Warranty Replacement Spare Parts Contact Contact Global Network Schedule Online Presentation Inquiry Search for
