Industry Directory | Manufacturer
Flason is high-tech enterprise focusing on SMT research and development,building new advanced solutions in SMT Assembly machines, like reflow oven, wave soldering machine, pick and place machine, AOI,SPI,PCB conveyor etc.
Consigned and Turnkey solutions for Contract Electronic Manufacturing
Description Ricocel is made by fiber glass cloth and high temperature resin. It is an ideal material for solder pallets, wave solder pallets, SMT solder pallets, SMT solder fixtures, selective solder fixtures and other specialty soldering fixtures.
Three (3) heating zone reflow oven for batch production runs utilizing our patented Horizontal ConvectionTM Heating technology for extremely uniform temperature profiling across the board for enhanced process control. The GF-120HT is lead-free compat
Electronics Forum | Mon Apr 07 11:53:44 EDT 2014 | hegemon
It's right there in front of you. Not enough overall temperature across the board. No wetting issue is evident, just looks like you need to turn up the heat, as Dave has mentioned. SOB has mentioned the issues surrounding the Electrolytic caps, ch
Electronics Forum | Fri Mar 15 15:34:37 EDT 2013 | anvil1021
In my experience used reflow ovens have been problematic. There are lots of adequate or better reflow systems out there that wont break the bank too badly....the N2 question, if you are going to be using solder that requires higher reflow temp than d
Industry News | 2018-10-18 10:16:53.0
Solder Tinned Pads vs Gold Plated Pads - The Importance of Selecting the Proper Surface Finish
Industry News | 2018-10-18 11:06:26.0
Halogen-free / Lead-free Printed Circuit Boards
Technical Library | 2008-04-29 15:50:45.0
The electronics industry is undergoing a materials evolution due to the pending Restriction of Hazardous Substances (RoHS) European Directive. Printed wiring board laminate suppliers, component fabricators, and printed wiring assembly operations are engaged in a multitude of investigations to determine what leadfree (Pbfree) material choices best fit their needs. The size and complexity of Pbfree implementation insures a transition period in which Pbfree and tin/lead solder finishes will be present on printed wiring assemblies
Technical Library | 2014-06-19 18:13:23.0
For high-density electronic packaging,the application of flip-chip solder joints has been well received in the microelectronics industry. High-lead(Pb) solders such as Sn5Pb95 are presently granted immunity from the RoHS requirements for their use in high-end flip-chip devices, especially in military applications. In flip-chip technology for consumer electronic products, organic substrates have replaced ceramic substrates due to the demand for less weight and low cost. However, the liquidus temperatures of high-Pb solders are over 300°C which would damage organic substrates during reflow because of the low glass transition temperature. To overcome this difficulty, the composite solder approach was developed...
Career Center | Flowery Branch, Georgia USA | Production
Ideal candidate must already be located in Atlanta metro area and have significant experience programming and operating Siemens F-15 and S-20 SMT, Reflow (Seho experience a plus) and Wave-Solder (Seho expererience a plus). Lead and RoHS experience re
Career Center | Rocklin, California USA | Production
General Overview of Position With this new position Parallax aims to improve our USA manufacturing throughput in a time when most companies normally only send work offshore. This raises the standard for requiring efficient use of our Pick and Place
Career Center | Derabassi, India | Maintenance,Management,Production,Quality Control,Sales/Marketing
PCB Assembly (SMT & PTH)--Process/Planning – Production – Maintenance/Troubleshooting – QA/QC
Career Center | Lapu-lapu, Cebu Philippines | Engineering,Maintenance,Production
Sept. 2, 2009 to Present, TPM2, LEAR Corporation, MEPZ-1, Lapu-Lapu City • Provides SMT engineering support to day-to-day manufacturing operations. • Handles SMT pick-and-place machine (Fuji, CP7, CP6 and QP242 Series, Universal Genesis GI-14D). •
RoHS: Five Years Later RoHS: Five Years Later by: Dr Ronald C. Lasky; Indium Corporation of America Are electronics any "greener" than before RoHS? It is a fair question to ask. With the advent of RoHS on July 1, 2006, and more recently REACH
SMTnet Express, March 16, 2017, Subscribers: 30,295, Companies: 15,177, Users: 42,073 Best Practices for RoHS Compliance in support of CE Marking Randy Flinders; GreenSoft Technology, Inc. In 2012, The European Directive on Reduction of Hazardous
| http://etasmt.com/cc?ID=te_news_bulletin,6161&url=_print
Reflow oven provider-I.C.T-News-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Reflow oven,SMT Reflow Soldering Oven 当前位置: Home >> News >> News Reflow oven provider
| https://www.eptac.com/faqs/ask-helena-leo/ask/soldering-iron-tip-temperature
: What is the thumb rule for soldering iron temperature for RoHS & Non-RoHS manual soldering? Question: What is the thumb rule for soldering iron temperature for RoHS
