Industry Directory | Manufacturer / Manufacturer's Representative
Hiflo Solders Private Ltd (HSPL) , was established in the early nineties and has grown into a business enterprise in manufacturing and marketing of Solders, Fluxes, Cleaners, Anodes, Soldering Accessories for the domestic & inte
OEM in Electrical & Electronics Products (AC-DC Power Supplies, AC-AC Adaptors & AC-DC Adaptors). Dealing in Scrap Copper, Aluminium, Wire, Steel, Solder, Iron, Plastic, Electronic Components etc). Dealing in Used Equipments.
Middle Size Lead Free SMT Reflow Oven for LED A600 Model: A600 MID-sized Lead-free Reflow Oven(6-zone) Brief: Lead-free reflow soldering Heating System > Eight groups of top and bottom forced hot air convection heating zones. > Patented heati
New Equipment | Solder Materials
KappAloy30™ - 70%Sn - 30%Zn – For soldering of aluminium. Good wetting. Used extensively in spray wire form for capacitors and other electronic parts. Higher temperature and higher tensile strength compared to 85Sn/15Zn and 91Sn/9Zn. For soldering
Electronics Forum | Fri Aug 17 01:40:55 EDT 2001 | V.RAMANAND KINI
We are in the watch & clock Business. We have a Watch IC chip that has to be wirebonded using Ultrasonic aluminium wedge bonder. The wire dia is 1.25mil. The PCB is made of G10 Glass epoxy copper clad laminate. The copper thickness is 18 microns. The
Electronics Forum | Mon Jun 01 17:49:39 EDT 2009 | gregoryyork
Sorry looking at your profile again and considering its Aluminium substrate I would opt for an increase to the preheat or introduce a soak to the profile to get the PCB up to reflow. Try soaking between 175 - 200C sufficient enough to heat the whole
Industry News | 2019-04-01 19:43:24.0
SEHO North America announced that it will hold its 2019 Technology Days in conjunction with guest presenters from Stannol LLC (soldering flux technologies), DCT USA LLC (process cleaning technologies), KIC (thermal profiling) and Scienscope International USA (inspection solutions). The event is scheduled to take place May 7–8, 2019 at SEHO’s North America Technology Center in Erlanger, KY.
Industry News | 2016-06-10 09:45:09.0
Cranston RI - Technic is pleased to announce the installation of the TechniPad Electroless Palladium process AT7015 at Gold Plating Services (GPS) in Santa Clara CA. GPS is a contract plating service specializing in precious metal plating for the printed circuit board industry.
Parts & Supplies | Circuit Board Assembly Products
1) 36*36mm/1up, Aluminium type: A5052 2) Thermal conductivity: 0.8-1.3 W/mk, 3) Single sided, 1.6mm 4) White solder mask/ Black Legend 5) Copper weight: 35μm 6) Surface Finish: ENIG 7) Profile: Punch
Parts & Supplies | Circuit Board Assembly Products
1). Laird aluminium backed 2). T-Prepreg 1KA Dielectric 3). Low Thermal Resistance for Cool & Efficient LED Operation 4). 1.6mm thick, single sided, 1 oz 5). Black solder mask/No ident 6). CNC rout outline 7). Immersion gold
Technical Library | 2023-11-14 19:24:08.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations.
Technical Library | 2021-09-29 13:35:21.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations. Selective soldering using dedicated plates with nozzles on the solder area is the preferred way to make these connections. All joints can be soldered in one dip resulting in short cycle times. Additional soldering on a small select nozzle can make the system even more flexible. The soldering can only be successful when there is enough thermal heat in the assembly before the solder touches the board. A forced convection preheat is a must for many applications to bring enough heat into the metal and board materials. The challenge in a dip soldering process is to get a sufficient hole fill without bridging and minimize the number of solder balls. A new cover was designed to improve the nitrogen environment. Reducing oxygen levels benefits the wetting, but increases the risk for solder balling. Previous investigations showed that solder balling can be minimized by selecting proper materials for solder resist and flux.
http://www.pcb-separator.com/ https://www.pcb-separator.com/html/PRODUCTS/PCB%20separator/2019/1113/832.html Hand push pcb cutter/PCB cutting machine manufacturer/PCB V-cut machine manufacturer/PCB depaneling equipment, automatic pcb cutting machine,
http://www.pcb-separator.com/ https://www.pcb-separator.com/html/PRODUCTS/PCB%20separator/2019/1113/832.html Hand push pcb cutter/PCB cutting machine manufacturer/PCB V-cut machine manufacturer/PCB depaneling equipment, automatic pcb cutting machine,
Career Center | NAGERCOIL, Tamil Nadu India | 2017-06-10 13:44:05.0
Production,Quality Control
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/dage/test-types/ball-shear-solder-ball-shear?con=t&page=5
Ball Shear Solder Ball Shear | Nordson DAGE X-Ray Inspection and Test Products Corporate | Global Directory | Languages Division Only All of Nordson Home Products Bondtesting Systems Micro Materials Testing Wafer Inspection and Metrology X-ray Inspection Systems X-ray Counting Systems Applications Battery
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2022/06/Optimizing-Reflowed-Solder-TIM-sTIMs-Processes-for-Emerging-Heterogeneous.pdf
Optimizing Reflowed Solder TIM (sTIMs) Processes for Emerging Heterogeneous Integrated Packages Optimizing Reflowed Solder TIM (sTIMs
winsouce.jpg)
