New Equipment | Solder Materials
Ceasolder-PAL (Pink Acrylic Latex) Peelable Acrylic Latex Solder Mask Ceasolder-Pal is a temporary, peelable solder mask comprised of a thixotropic, synthetic acrylic latex designed to withstand fluxing, wave soldering and cleaning operations. Unli
New Equipment | Fabrication Services
Gold Finger PCB No of layer: 6 layer Material: FR-4, TG170 Thickness: 1.6mm Copper thickness: 35um copper/1oz Yellow Solder Mask Surface finishing: ENIG, gold 0.05-0.1um, Nickel 3-5um Special technology: gold finger/Edge connector plating, go
Industry News | 2003-05-19 10:06:43.0
The PCB is available with a maximum panel size of 406-by-460mm and a minimum board thickness of 0.8mm.
Industry News | 2016-09-14 17:44:33.0
IPC – Association Connecting Electronics Industries® will present “PCB Troubleshooting” on November 2, 2016 in Raleigh, N.C. in conjunction with regional trade show, PCB Carolina.
Technical Library | 2014-11-06 16:43:24.0
This paper summarizes the results of recent investigations to examine the effect of electroless nickel process variations with respect to Pb-free (Sn-3.0Ag-0.5Cu) solder connections. These investigations included both ENIG and NiPd as surface finishes intended for second level interconnects in BGA applications. Process variations that are suspected to weaken solder joint reliability, including treatment time and pH, were used to achieve differences in nickel layer composition. Immersion gold deposits were also varied, but were directly dependent upon the plated nickel characteristics. In contrast to gold, different electroless palladium thicknesses were independently achieved by treatment time adjustments.
Technical Library | 2013-01-17 15:37:21.0
A problem exists with electroless nickel / immersion gold (ENIG) surface finish on some pads, on some boards, that causes the solder joint to separate from the nickel surface, causing an open. The solder has wet and dissolved the gold. A weak tin to nickel intermetallic bond initially occurs, but the intermetallic bond cracks and separates when put under stress. Since the electroless nickel / immersion gold finish performs satisfactory in most applications, there had to be some area within the current chemistry process window that was satisfactory. The problem has been described as a 'BGA Black Pad Problem' or by HP as an 'Interfacial Fracture of BGA Packages…'[1]. A 24 variable experiment using three different chemistries was conducted during the ITRI (Interconnect Technology Research Institute) ENIG Project, Round 1, to investigate what process parameters of the chemical matrix were potentially satisfactory to use and which process parameters of the chemical matrix need to be avoided. The ITRI ENIG Project has completed Round 1 of testing and is now in the process of Round 2 TV (Test Vehicle) build.
SMTnet Express, December 30, 2021, Subscribers: 26,039, Companies: 11,482, Users: 26,994 " ---> Effects of PCB Substrate Surface Finish and Flux on Solderability of Lead-Free SAC305 Alloy The solderability of the SAC305 alloy
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/Vacuum-Void-Reduction-Reflow.pdf
Surface Finish on Assembly Quality and Attachment Reliability of a Plastic Ball Grid Array,” “The Effect of Modifications to the Nickel/Gold Surface Finish on Assembly Quality and Attachment Reliability of a Plastic Ball Grid Array,” IEEE Transactions on
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/resource-center/solder-selection-guide
Monel Nichrome Nickel Nickel Iron / Alloy42 Nickel Silver Palladium Platinum Silver Solder Plated Stainless Steel Tin Titanium Non-solderable Zinc Key Recommended Alloy Specific (contact EFD
winsouce.jpg)